Furuno GP-30 Operators Manuale

Selecting Display Mode

Press the [DISP] key.

Plotter Display

[ 5 ]

CSE:

7°

SPD:

0.0 k

34°44.000N 135°21.000E

Highway Display

CSE

BRG

RNG

SPD

7°

---°

---

6.5 k

0.5 0.5

XTE:

0.05n

Steering Display

2D MAG 05:32

30 60

300 330

SPD: 6.5 k

tCSE: 20°

RNG: --.- n

mBRG: ---°

TTG: ETA:

1H30M 12:30

Nav Data Display

2D 12–DEC–97 15:37:40

SPD: CSE:

34°44. 000'

135°21. 000'

7°6.5

GP-30/35 GPS NAVIGATOR

Operator's Guide

The purpose of this operator's guide is to provide the basic operating procedures for this

equipment. For detailed information, refer to the operator's manual.

Enlarging, Shrinking the

Display

1. Press the [MENU] key.

2. Press the [ENT] key.

3. Press ▲ to enlarge; ▼ to shrink.

4. Press the [ENT] key to close the window.

Shifting the Cursor, Display

1. Press the Cursor Pad to turn on and shift

the cursor.

2. Place the cursor on an edge of the screen

to shift the display.

Centering Own Position

1. Press the [MENU] key.

2. Select “SHIP TO CENTER?”.

3. Press the [ENT] key.

Entering MOB Mark

1. Press the [MARK/MOB] key.

2. Select “MOB?”.

3. Press the [ENT] key.

4. Press the [ENT] key again.

Ship's track and

data

3D view of ship's

track overlaid on

intended course

Graphic display

of steering data

Comprehensive

navigation data

display

Registering Waypoints

A waypoint can be entered four ways. Be-

low is the procedure for entry by the cursor.

1. Operate the Cursor Pad to place the cur-

sor on the location you want to make a

waypoint.

2. Press the [ENT] key.

ENTER A NEW WYPT NAME.

0 0 1 — — — ?

( 001: DEFAULT NAME )

Quit : [MENU]

CURSOR POS. →WYPT

3. Press the [ENT] key.

NAME: KOBE

34°44.000’N MARK

135°21.000’E x

12—DEC—97 11:25

Exit?

4. Place the cursor under “MARK”.

5. Press the [ENT] key.

6. Press ▲ or ▼ to select the mark desired.

7. Press the [ENT] key.

8. Select “Exit?” and then press the [ENT]

key.

Registering Routes

1. Press the [MENU] key twice.

2. Select “ROUTES”.

3. Press the [ENT] key.

4. Press the [ENT] key.

5. Press the [ENT] key, select route

waypoint and press the [ENT] key.

6. Repeat steps 5 to enter other waypoints

on the route.

7. Select “Exit?”.

8. Press the [ENT] key to register.

Setting, Cancelling Destination

Destination can be set three ways. Below is

the method for setting destination by the

cursor.

To set destination;

1. Press the [GOTO] key.

2. Select “CURSOR?”.

3. Press the [ENT] key.

4. Place the cursor on position to set as des-

tination.

5. Press the [ENT] key.

To cancel destination;

1. Press the [GOTO] key.

2. Select “OFF?”.

3. Press the [ENT] key.

Setting the Arrival Alarm

1. Press the [MENU] key twice.

2. Select “ALARMS”.

3. Press the [ENT] key.

4. Press the [ENT] key.

5. Select “ARV”.

6. Press the [ENT] key.

7. Press the [ENT] key and enter arrival

alarm range.

8. Press the [ENT] key.

9. Press the [MENU] key.

PUB.NO.OSE-43840-D

(9801,DAMI) GP-30/35

Altri manuali per GP-30 Operators

Questo manuale è adatto per i seguenti modelli

Altri manuali Furuno GPS

Manuali GPS popolari di altre marche

Raven

Raven Cruizer II Manuale

Hama

Hama 53118 Manuale utente

Garmin

Garmin SOUNDER 125 Manuale utente

Garmin

Garmin DEZL 580 Manuale utente

Jigabot

Jigabot EX Manuale utente

Pointer

Pointer Cellocator CelloTrack XT LTE Guida all'installazione

Queclink

Queclink GV55LITE Manuale utente

Voxson

Voxson Voxtrack GPS500 Manuale di istruzioni

Garmin

Garmin ECHOMAP PLUS Manuale utente

Starcom Systems

Starcom Systems Kylos Compact Manuale utente

Garmin

Garmin 15 H Series Manuale utente

Cobra

Cobra Marine MC 600Ci Manuale utente

Cellocator

Cellocator CelloTrack T Manuale utente

Enfora

Enfora Mini-MT GSM2228UG001 Manuale utente

Magellan

Magellan eXplorist 100 Manuale utente

LTE

LTE G50B Manuale utente

Garmin

Garmin DEZL OTR500 Manuale utente

SkyGolf

SkyGolf SkyCaddie SG1 Manuale utente