Future Design ELI43-CP Manuale utente

User’s Manual

ELI43-CP

Revision 1.02

ELI43-CP User’s Manual

02/13/17

Designs, Inc.

Page 2of 12

Important Legal Information

Information in this document is provided solely to enable the use of Future Designs, Inc. (FDI) products.

FDI assumes no liability whatsoever, including infringement of any patent or copyright. FDI reserves the

right to make changes to these specifications at any time, without notice. No part of this document may be

reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without

the express written permission of Future Designs, Inc. 996 A Cleaner Way, Huntsville, AL 35805.

Microsoft, MS-DOS, Windows, Windows XP, Microsoft Word are registered trademarks of Microsoft

Corporation. Other brand names are trademarks or registered trademarks of their respective owners.

Printed in the United States of America.

For more information on FDI or our products please visit www.TeamFDI.com.

FDI Document PN: MA00066

Revision: 1.02, 02/13/2017

ELI43-CP User’s Manual

02/13/17

Designs, Inc.

Page 3of 12

Important Legal Information.......................................................................................................................... 2

1.0 Introduction ......................................................................................................................................... 4

2.0 ELI43-CP Box Contents...................................................................................................................... 5

3.0 Optional Accessories Recommended for Use (Purchased Separately)............................................... 5

4.0 ESD Warning ...................................................................................................................................... 5

5.0 Determining the Revision of your ELI................................................................................................ 5

6.0 Technical Specifications ..................................................................................................................... 6

7.0 Connectors........................................................................................................................................... 7

8.0 Power Details ...................................................................................................................................... 7

9.0 Extended Display Information Data (EDID) ...................................................................................... 8

10.0 PWM Control of Backlight ................................................................................................................. 9

11.0 Mechanical View............................................................................................................................... 10

12.0 Support .............................................................................................................................................. 12

12.1 Where to Get Help......................................................................................................................... 12

12.2 Useful Links .................................................................................................................................. 12

ELI43-CP User’s Manual

02/13/17

Designs, Inc.

Page 4of 12

1.0 Introduction

About ELI (the Easy LCD Interface)

ELI®is Future Designs, Inc.’s family of long-life, plug-and-play embedded displays. ELI

products are true modular embedded display solutions that require no engineering or lead-time.

All ELI products are compatible with a wide range of single board computers including

Raspberry Pi, BeagleBone Black and Windows-based units. FDI designed ELI as an embedded

display option that requires minimal development time to help customers reach production

quickly. Once a product is in production, FDI’s 10-15 year ELI product availability guarantee

helps ensure production schedules without the risk of expensive or time consuming redesigns.

Learn more about ELI at TeamFDI.com/ELI.

ELI Compatibility

ELI products are compatible with most single board computers, PCs and operating

systems. The table below illustrates the results of FDI’s compatibility tests with popular

operating systems and platforms. Our results, as indicated in the table, demonstrate ELI’s

versatility but the table is not exhaustive. ELI products are designed to work with any single

board computer that has an HDMI or DVI output. To submit a question about ELI’s

compatibility with a platform or operating system that is not included in the table, contact a

member of the FDI support team at [email protected].

Figure 1. Tested ELI Compatibility

ELI43-CP User’s Manual

02/13/17

Designs, Inc.

Page 5of 12

Your ELI Experience

Share your experience connecting ELI devices to various (single board) computers at:

http://www.teamfdi.com/edid/#edidform.

2.0 ELI43-CP Box Contents

•ELI43-CP

3.0 Optional Accessories Recommended for Use (Purchased Separately)

•12V DC (+/- 5%) 2A Power Supply with a center positive barrel plug

o2.1mm I.D. x 5.5mm O.D. x 9.5mm (All ELI units operate from +12V DC so this is the recommended power

supply input voltage for the entire Family. ELI43-CP units from Rev 3.0 and greater are also capable of operation

from a range of +5 to 24V DC (+/- 5%)

•USB Type A to Mini Type B Cable (For touch)

•HDMI Cable (Type A Male)

4.0 ESD Warning

Figure 2. Electrostatic Sensitive Device

Our ELI units are shipped in a protective anti-static package. Do not subject the module to

high electrostatic potentials. Exposure to high electrostatic potentials may cause damage to the

boards that will not be covered under warranty. General practice for working with static sensitive

devices should be followed when working with this device.

5.0 Determining the Revision of your ELI

All ELI units have a label on the board to identify the part number and revision. An example of an

ELI label is shown below.

ELI Part Number ELI Revision Number

ELI43-CP User’s Manual

02/13/17

Designs, Inc.

Page 6of 12

6.0 Technical Specifications

Table 1. Technical Specifications

Screen Size (inches):

4.3

Display Technology:

TFT LCD TN panel anti-glare

Resolution:

480 x 272 (WQVGA)

Brightness (nits typical):

470

Contrast Ratio (typical):

500:1

Aspect Ratio:

16:9

Interface Input Mode:

HDMI/DVI

Colors:

16M (24 bit)

Horizontal Viewing Angle:

70/70°

Vertical Viewing Angle:

70/50°

Surface:

Anti-glare

Touch Screen:

Projected Capacitive

Touch Screen Interface (mA typical/max):

USB Device (24/47)

Touch Panel Hardness:

>7H

Touch Panel Force (gF max):

Active Area (in mm W x H):

95.04 x 53.86

Response Time (ms):

Backlight:

10 LED (5S x 2P)

Backlight Life (K hours typical):

Backlight Power Consumption (mW Typical):

600

Operating Temperature:

-20° to 70° C

Storage Temperature:

-30° to 80° C

Input Voltage:

Rev. ≤ 2.x: +12VDC + 5%

Rev. ≥ 3.0: +5 to 24VDC + 5%

Power Consumption (ma typical/max)

106/250

RoHS Compliant:

Yes

Dimensions (in mm W x H x D)

116.84 x 72.26 x 19.10

Mounting:

#4 screw mounts in 4 corners

Weight (grams)

106

ELI43-CP User’s Manual

02/13/17

Designs, Inc.

Page 7of 12

7.0 Connectors

Figure 3. ELI43-CP Connectors

8.0 Power Details

A 12VDC (+/- 5%) power supply with a 2.0A output will power any board from the ELI Family. This

allows a common, off-the-shelf power supply such as the T1071-P5P-ND to be used for quick demos

or prototyping across the entire ELI Family. In general, any power supply with a 2.1mm center

positive plug that provides 12VDC will be acceptable if it can provide enough current to power the

particular ELI unit being used. On the ELI43-CP, plug power into the (P2) connector.

Revision ≥3.0 adds the ability to use power supplies ranging from +5 to 24V DC ± 5% (2.0A) with

ELI43-CP boards.

For volume production applications, the input power can be optimized for your particular ELI unit

and lower capacity power supplies can be used.

In cases where the barrel connector is not desired, you can use the alternate power input connector

(J8) with supports directly plugging in 20-26 AWG wire with maximum 5A current per contact. The

datasheet for this J8 connector (PCB terminal block - PTSM 0,5/ 2-2,5-H SMD WH R24 –1814634)

can be found at http://tinyurl.com/1814634.

ELI43-CP User’s Manual

02/13/17

Designs, Inc.

Page 8of 12

To verify that the ELI43-CP unit is correctly powered you may check the 12VDC input with a Fluke

meter or scope by probing the +12V and GND contacts, shown below. Please verify that the +12VDC

is present, is within the +/- 5% tolerance and is free from excessive noise or AC ripple.

Note: If using an input that is within the acceptable range of Rev 3.0 ELI43-CP boards, +5VDC

to +24VDC (+/- 5%), please keep in mind that the 12V Test points should be at the voltage of

your chosen power supply (5-24VDC).

Figure 4. ELI43-CP Power Test Points

9.0 Extended Display Information Data (EDID)

ELI uses Extended Display Identification Data (EDID) for automatic configuration with many

operating systems. You can find out more on our website at http://www.teamfdi.com/edid/.

ELI43-CP User’s Manual

02/13/17

Designs, Inc.

Page 9of 12

10.0 PWM Control of Backlight

Figure 5. PWM Backlight Control

All ELI products are designed to reduce power consumption when required. To reduce the power

consumption of the backlight/ELI, the user can connect an externally generated Pulse Width

Modulated (PWM) signal to pin 2 of J5. This signal must be between 5KHz and 100KHz. On the ELI

side we softly pull the PWM diming signal to LCD_VDD providing 100% backlight power when no

PWM signal is applied at J5. In the ELI43-CR and ELI43-CP, power consumption can be controlled

from 1.27W to 0.43W with the PWM signal.

If the external system is capable of providing the PWM diming signal at 3.3V DC, there is no need to

connect pin 1 to the cable. ELI provides this signal when the external system needs this voltage to

generate the PWM diming signal.

ELI43-CP User’s Manual

02/13/17

Designs, Inc.

Page 10 of 12

11.0 Mechanical View

●Tape used to secure the LCD to the PCB is: 3M VHB 4956 ½” width

●4 screw holes on the ELI43-CP accept up to #4 size screws to mount ELI43-CP into an enclosure

and to connect to the system ground.

●The exposed ground pads may be used to connect the ELI43-CP PCB directly to the LCD using

copper or aluminum foil tape. This practice meets ESD requirements.

Figure 6. Front View with Measurements

Indice

Altri manuali Future Design Scheda madre

Future Design

Future Design ELI43-CR Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente