FVC UN0107B Manuale utente
PROD
UCT I
MAGE
UN0107B
Rear Platform Mounting Posts
Installation Guide
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
All Flatline Van Co products must be properly assembled and secured before attaching to your
vehicle. Improper attachment could result in an automobile accident, and could cause serious bodily
injury or death to you or to others involved. You are responsible for assembling and securing Flatline
Van Co products to your vehicle, checking the mounting points and attachments prior to use, and
regularly inspecting the products for wear and or damage. We always recommend you use a
professional to install any aftermarket accessories to your vehicle. If you have no mechanical
experience and are not thoroughly familiar with the installation procedures, you must have the
product installed by a professional installer or other qualified persons. The responsibility is yours
and must be taken seriously for everyone's safety.
1
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
thanks.
2
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
THANK YOU!
ARE YOU EXCITED ABOUT YOUR NEW REAR PLATFORM MOUNTING POSTS? HERE ARE
A FEW THINGS TO DO BEFORE BEGINNING THE INSTALLATION PROCESS--
• PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO
DAMAGE INCURRED DURING SHIPPING.
• IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR
CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.
• NEXT, USING THE “PACKAGE CONTENTS” PAGE, CHECK
INVENTORY AND FAMILIARIZE YOURSELF WITH THE PARTS
AND HARDWARE.
• GATHER ALL TOOLS REQUIRED FOR INSTALL.
-3/8 BOX WRENCH OR SOCKET
-7/16 BOX WRENCH OR SOCKET
-9/16 BOX WRENCH OR SOCKET
-5/32 HEX KEY ALLEN WRENCH
ESTIMATED INSTALL TIME- ABOUT 30 MIN
TOOLS
5/32 ALLEN KEY
3/8 WRENCH
7/16 WRENCH 9/16 WRENCH
PACKAGE CONTENTS
3
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
MOUNTING POST
QTY - 2
HARDWARE
4
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
3/8 SCREW FLAT WASHER
QTY - 8
3/8-16 FLANGED NYLON
INSERT LOCKNUT
QTY - 8
3/8-16 X 1 FLANGED HEX
HEAD SCREW
QTY - 8
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
LET’S GET STARTED!
THE LOCATION FOR MOUNTING WILL BE DETERMINED BY WHICH ACCESSORIES YOU
ARE USING WITH YOUR REAR PLATFORM MOUNTING POSTS AND WHAT LAYOUT YOU
DECIDE TO RUN. IN THIS GUIDE WE WILL PROVIDE YOU HELPFUL DIMENSIONAL
INFORMATION, AS WELL AS RECOMMENDED INSTALL ORIENTATION BASED ON USE
CASE ETC.
1. THE FIGURE ON THE RIGHT PROVIDES THE CENTERLINE DIMENSIONS OF THE
MOUNTING HOLES ON THE POSTS IN BOTH UPRIGHT AND HORIZONTAL
MOUNTING STYLES WHEN LOCATED AT THE WIDEST POSSIBLE LOCATIONS.
NOTE- WE RECOMMEND USING THE HORIZONTAL MOUNTING STYLE
WHEN MOUNTING UP BIKE TRAYS (LIKE 1UP) FOR MAXIMUM
STABILITY.
2. THE MOUNTING POSTS CAN ALSO BE ARRANGED ON THE SAME VERTICAL
PLANE TO BE USED FOR SNOWBOARD/SKI RACKS. THIS CAN PROVIDE
STORAGE FOR A LOT OF BOARDS/SKIS!
NOTE- THE DIAGRAM BELOW SHOWS THE LENGTH OF THE MOUNT
POST TO ASSIST IN SELECTING THE APPROPRIATE SNOWBOARD/SKI
RACK LENGTH.
5
25.500
C
L
15.0
C
L
23.25
2.50
20.00
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576 6
3. ONCE YOU’VE DETERMINED THE APPROPRIATE MOUNTING LOCATIONS,
ATTACH THE MOUNT POSTS TO YOUR REAR PLATFORM USING THE SUPPLIED
3/8-16 X 1 FLANGED HEX HEAD SCREWS, 3/8 FLAT WASHERS, AND 3/8-16
FLANGED NYLON INSERT LOCKNUTS AS SHOWN IN THE FIGURE TO THE
RIGHT.
NOTE- IN EVERY ORIENTATION OF MOUNTING IT IS IMPORTANT TO
ENSURE YOU ARE USING AT LEAST THREE FASTENERS TO MOUNT AS
SHOWN IN THE FIGURE BELOW. WHEN MOUNT POSTS ARE IN THE
UPRIGHT POSITION THERE SHOULD ALWAYS BE A FASTENER IN THE
TOP HOLE. FAILURE TO DO THIS CAN RESULT IN A MALFUNCTION OF
THE MOUNT POST.
3/8 SCREW FLAT WASHER
3/8-16 FLANGED NYLON
INSERT LOCKNUT
3/8-16 X 1 FLANGED HEX
HEAD SCREW
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
GET OUT AND EXPLORE!
LEAVE US A REVIEW
Happy with your new FVC product? We would love to hear (and see) from you! Head to the product page and click "Leave
Review." Add a short review and upload a few photos to be showcased on the product page.
SHARE YOUR PHOTOS WITH US
We love seeing how our customers use their FVC products and following along with your adventures. Tag us in your photos
with @flatlinevanco or send them to us via email. We love posting customer pictures in our feed!
CUSTOMER SUPPORT
If you are having any issues with your product, please reach out, and we will make it right. FVC is a company of van and
outdoor enthusiasts that design and use our own products, so we want you to be as stoked on your new parts as we are!
thanks!
@flatlinevanco
facebook.com/flatlinevanco
youtube.com/c/flatlinevanco
support@flatlinevanco.com
Indice
Altri manuali FVC Accessori per automobili
FVC
FVC Sprinter Headliner Shelf Manuale utente
FVC
FVC Sprinter Bed System Flarespace Manuale utente
FVC
FVC SP0208B Manuale utente
FVC
FVC TR0105B Manuale utente
FVC
FVC SPRINTER SP1123B Manuale utente
FVC
FVC Sprinter Bed System Adventure Wagon Kit Manuale utente
FVC
FVC TR1105B Manuale utente
FVC
FVC TR0201B Manuale utente
FVC
FVC SP0105B Manuale utente
FVC
FVC Low Pro F80 Kit Manuale utente
FVC
FVC Low Pro Roof Rack 148 HR Manuale utente
FVC
FVC TR0106B Manuale utente
FVC
FVC Safari Rack 170 Manuale utente
FVC
FVC TR1103B Manuale utente
FVC
FVC 24 Inch Upper Cabinet Manuale utente
FVC
FVC TR1101B Manuale utente
FVC
FVC SP1104B Manuale utente
FVC
FVC Low Pro Front Fairing Manuale utente
FVC
FVC SP0206B Manuale utente
FVC
FVC SP0203B Manuale utente
