GCC Technologies EP-60 Manuale utente

V.12 2014 Mar.

Expert Pro Series

User Manual

http://www.GCCworld.com

V.12 2014 Mar.

NOTICE

GCC reserves the right to modify the information contained in this user

manual at any time without prior notice; un-authorized modification, copying

distribution or display is prohibited. All comments, queries or

suggestions concerning this manual please consult with your local dealer.

Expert Pro User Manual

Important Information

PRECAUTIONS IN USE

For safety concern, please always hold the cutter firmly from the bottom

when moving it. Do not move the cutter by clasping the depression area on

both sides.

Do not shake or drop the blade holder, a blade tip maybe fly out.

During operation, keep away from any moving parts of the cutter (such as

the carriage, drums). Also be careful that your clothing and hairs do not be

caught.

Always connect the power cable to a grounded outlet.

Always use the accessory power cable that is provided. Do not wire the

power cable so that it becomes bent or caught between objects.

Do not connect the power cable to branching outlet to which other

machines are also connected, or use an extension cable. There is danger

of overheating and of misoperation of the machine.

Keep the tools away from children where they can reach.

Always put the pinch rollers within position of the white marks.

Thanks for your purchase of GCC Expert Pro Cutting Plotter. For

your safety and to optimize the performance of the Expert Pro,

please read the user manual completely and keep it in a correct

location.

Expert Pro User Manual

Contents

Important Information

1. General Information

1.1 Introduction 1-1

1.2 Package Items 1-1

1.3 Product Features 1-2

1.4 Appearance of Expert Pro 1-3

1.4.1 Front View of Expert Pro 1-4

1.4.2 Back View of Expert Pro 1-4

1.4.3 The Whole View of Expert Pro 1-4

1.4.4 The Left-hand Side of Expert Pro 1-5

1.4.5 The Right-hand Side of Expert Pro 1-5

2. Installation

2.1 Precaution 2-1

2.2 Stand & Flexible Media Support System 2-2

2.2.1 Stand Installation (for EP-60) 2-2

2.2.2 Stand & Flexible Media Support System (for EP-132S) 2-5

2.3 Desktop Support Brackets 2-10

2.4 Blade Installation 2-12

2.5 Instruction of Damper Roller

2-15

2.6 Cable Connections 2-16

2.6.1 USB Interface 2-16

2.6.2 Driver Un-installation 2-20

2.6.3 How to switch the USB mode? 2-23

2.6.4 RS-232 Interface 2-23

2.6.5 Data Transmitting 2-23

2.6.6 Printer Sever Shared Setting 2-24

3. The Control Panel

3.1 The LCD Panel 3-1

3.2 Menu in On-line Mode 3-2

3.3 Menu in Off-line Mode 3-3

3.4 Menu Items 3-4

4. Operation

4.1 Media Loading 4-1

4.1.1 Loading the Sheet Media 4-1

4.1.2 Loading the Roll Media 4-3

4.2 Tracking Performance 4-6

4.3 Cutting Force and Offset Adjustment 4-7

4.4 When Completing the Cutting Job 4-9

4.5 Expert Pro Print Driver setting 4-10

4.5.1 Option Page 4-10

4.6 Reference Parameter setting for different materials 4-12

5. Maintenance

5.1 Cleaning the cutting Plotter 5-1

Expert Pro User Manual

Contents

5.2 Cleaning the Grid Drum 5-2

5.3 Cleaning the Pinch Rollers 5-2

6. Trouble Shooting

6.1 Non-Operational Problems 6-1

6.2 Operational Problems 6-2

6.3 Communication Problems 6-3

6.4 Software Problems 6-4

6.5 Cutting Quality Problems 6-5

Appendix

A-1

Specifications of Expert Pro A-1

A-2

Blade Specification A-2

A-3

CorelDraw Instruction A-3

A-4 DirectCut A-4

Expert Pro User Manual

General Information 1-1

Chapter 1 General Information

1.1 Introduction

Expert Pro series cutting plotters have been designed to produce computer-generated images

on sheets or rolls of vinyl media.

This manual covers the following models of Expert Pro series cutting plotters:

‧EP-60 for media width: 70mm(2.76”) ~ 719mm(28.3”)

‧EP-132S for media width: 70mm(2.76”) ~ 1470mm(57.87”)

1.2 Package Items

The package of the Expert Pro model contents the items listed below, please check carefully.

If you find any item missing, please consult your local dealer for further assistance.

1. Cutting Plotter 1

2. Stand Set ( Optional for EP-60 )

1 Left side vertical stand

1 Right side vertical stand

1 Support for left side

1 Support for right side

1 Stand Beam

2 Bottom Stands with wheels

2 Sliding brackets for paper takeup

1 Hex Wrench (M5)Φ4

28 Socket flat head screws(M6*12L)

1 Installation Guide

2. Stand Set ( for EP-132S )

2 piece of T-shape stand

1 piece of stand beam

18 pieces of M6 screws

1 piece of M5 L-shape hexagon screw driver

1 piece of Installation Guide for Stand Set

Expert Pro User Manual

General Information 1-2

3. Flexible Media Support System Package

Items EP-60 EP-132S

1 set of Roll Media Flange (2 pieces) V

1 set of Roll Holder (2 pieces) V

1 set of Roll Holder Guide Bushes (4 pieces) V

1 set of Roll Holder Support (2 pieces) V

32 pieces of M6 screws V

1 piece of M6 L-shape hexagon screw driver V

1 piece of Roll Base V

4. Accessories

1 piece of User’s Compact Disk

1 piece of AC power Cord

1 pieces of data cable (Print cable)

1 pieces of data cable (USB cable: 1.8m)

1 set of Blade Holder Assembly (Installed in tool carriage of the cutting

plotter )

1 piece of Blade (Installed in Blade Holder)

1 piece of Safe Blade

1 piece of Cutting Pad

1 piece of Tweezers

1 piece of Promise Card

1.3 Product Features

The following are the main features of the Expert Pro series cutting plotters:

‧Dual-port connectivity provides you with greater flexibility.

‧Up to 400-gram cutting force.

‧Up to 600mm/per second cutting speed.

‧Guaranty 5-meter tracking.

‧User-friendly, multi-language control panel

Expert Pro User Manual

General Information 1-3

1.4 Appearance of Expert Pro

1.4.1 The Front View (Figure 1-1)

Control Panel

14 buttons and 1

LED and 1 LCM

showing messages

and menus.

Cutting Pad

provides the protection of

blade when the blade is

cutting.

Tool Carriage

performs the

cutting with the

installed blade or

pen.

Alignment Rulers

media can be aligned

with the clear guide line

marks

Grid Drums

move the media back and

forth during operation.

Slicer Groove

cuts

off the extra

media easily along

this groove.

Platen

provides the surface for

supporting media while

cutting

Figure 1-1

Expert Pro User Manual

General Information 1-4

1.4.2 The Back View (Figure 1-2)

1.4.3 The Whole View (Figure 1-3)

** The Expert Pro model comes with a standard stand

Pinch Rollers

hold the media during cutting.

Lever

raises or lowers

the pinch rollers.

Figure 1-2

Figure 1-3

Roll Holder

olds and supplies the

roll media for cutting.

Stand Beam

stabilizes the body.

Roll Holder

Support

supports roll holders

T-Stand

–

supports

the cutting plotter

T-Stand

–

supports

the cutting plotter

Expert Pro User Manual

General Information 1-5

1.4.4 The Left-hand Side of Expert Pro (Figure 1-4)

1.4.5 The Right-hand Side of Expert Pro (Figure 1-5)

Fuse – 3 Amp.

AC Power Connector

Power Switch – On when switches to [I]; Off to [O]

Figure 1-4

Serial Interface Connector (RS232C)

used to connect the cutting plotter to a

computer through a serial interface cable.

Figure 1-5

USB Connector

used to connect the cutting plotter to a

computer through a USB cable.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali GCC Technologies Plotter

GCC Technologies

GCC Technologies Jaguar IV Series Manuale utente

GCC Technologies

GCC Technologies Puma Series Manuale operativo

GCC Technologies

GCC Technologies BENGAL Manuale utente

GCC Technologies

GCC Technologies Jaguar V Series Manuale utente

GCC Technologies

GCC Technologies AR-24 Manuale utente

GCC Technologies

GCC Technologies EXPERT 24 LX Manuale utente

GCC Technologies

GCC Technologies Expert 52 Manuale utente

GCC Technologies

GCC Technologies EXPERT 24 Manuale utente

GCC Technologies

GCC Technologies Jaguar IV Series Manuale utente

GCC Technologies

GCC Technologies EXPERT 24 LX Manuale utente

GCC Technologies

GCC Technologies puma iii series Manuale utente

GCC Technologies

GCC Technologies J5 Series Manuale utente

GCC Technologies

GCC Technologies P3-60 Manuale utente

GCC Technologies

GCC Technologies RX II Series Manuale utente

GCC Technologies

GCC Technologies Jaguar II Series Manuale utente

Manuali Plotter popolari di altre marche

MUTOH

MUTOH Kona 760 Manuale utente

HP 7475a Manuale utente

Vulcan-Hart

Vulcan-Hart FC-500VC Manuale utente

Roland

Roland TrueVIS VG-640 Manuale del proprietario

Furuno

Furuno RP-180 Manuale utente

Roland

Roland VersaCamm SP-540V Manuale utente

MIMAKI

MIMAKI CF2 Series Manuale utente

Ioline

Ioline Summit Manuale utente

Summa

Summa S CLASS Manuale utente

Gerber Technology

Gerber Technology GERBERplotter MP Series Manuale utente

Furuno

Furuno RP-17 Manuale utente

HP 7470A Manuale utente

SII

SII LP-1010 Manuale utente

Great Computer

Great Computer JII-61 Manuale utente

Roland

Roland VersaUv LEF - 12i Manuale utente

Lectra

Lectra Alys 120 Manuale utente

MUTOH

MUTOH Ultima SC-850D Manuale utente

Skycut

Skycut D Series Manuale utente