GCC Technologies Jaguar V Series Manuale utente

V.4 2020 Feb.

0BJaguar V Series (PPF)

User Manual

Uhttp://www.GCCworld.com

V.4 2020 Feb.

UNOTICE

GCC reserves the right to modify the information contained in this user

manual at any time without prior notice; un-authorized modification, copying

distribution or display is prohibited. All comments, queries or

suggestions concerning this manual please consult with your local dealer.

JaguarVUserManual

Important Information

Thank you for purchasing the GCC Jaguar V Cutting Plotter.

Before you use the cutting plotter, please make sure that you have read the

safety precautions and instructions below.

Caution

SAFETYPRECAUTIONS!

For safety concern, please always hold the cutter firmly from the bottom while moving

it. Do not move the cutter by clasping the depression area on both sides.

Do not shake or drop the blade holder, a blade tip can fly out.

During an operation, do not touch any of the moving parts of this machine (such as the

carriage). Also be careful to make sure that clothing and hair do not get caught.

Always connect the power cable to a grounded outlet.

Always use the accessory power cable which is provided. Do not wire the power cable

so that it becomes bent or caught between objects.

Do not connect the power cable to branching outlet to which other machines are also

connected, or use an extension cable. There is danger of overheating and of

mis-operation of the machine.

Keep the tools away from children where they can reach.

Always put the pinch rollers within the white marks.

ImportantInformation

O(Correct)

Holdfromthebottom

X(Incorrect)

Holdthedepressionarea

JaguarVUserManual

Important Information

Warning

Never press the top release grip and pull the bottom release grip at the same time as

the pictures shown below:

O (CORRECT) X(INCORRECT)

Press down

top

release grip

DISABLE

Press down

Stop bar

ENABLE

Pullupbottomtoreleasegrip

Note:

In case the grips clipped

together due to your

wrong operation, please

use a pair of tweezers to

pull out the stop bar

when pressing down the

top release grip. Keep

the stop bar outside then

release the grips as the

right figure.

Jaguar V User Manual

Table of Contents

Important Information

1. General Information

1.1 Introduction

1-1

1.2 Package Items

1-1

1.3Product Features

1-2

1.4 Appearance of Jaguar V

1-2

1.4.1 The Front View

1-2

1.4.2 The Back View

1-3

1.4.3 The Left-hand Side

1-3

1.4.4 The Right-hand Side

1-4

2. Installation

2.1 Precaution

2-1

2.2 Stand & Media Take-up System Installation

2-2

2.3 Conductive Copper Wires Installation

2-6

2.4Blade Installation

2-7

2.5Automatic Blade Length Detection

2-9

2.6Cable Connections

2-11

2.6.1 USB Interface

2-11

2.6.1.1 Connecting your GCC cutter

2-11

2.6.1.2 Installing the drive

2-12

2.6.1.3 Driver Un-installation

2-15

2.6.2 RS-232 Interface

2-15

2.6.3 Ethernet Connection

2-16

2.6.4 Data Transmitting

2-17

2.6.5 Printer Sever Shared Setting

2-18

3. The Control Panel

3.1 The LCD Panel

3-1

3.2Menu in On-line Mode

3-2

3.3Menu in Off-line Mode

3-3

3.4 Menu Items

3-5

4. Operation

4.1 Media Loading

4-1

4.2 Loading the Roll Media

4-3

4.3Tracking Performance

4-5

4.4Cutting Force and OffsetAdjustment

4-7

4.5How to Cut 3mm Letter

4-8

4.6How to Make A Long Plot

4-8

4.7When Completing the Cutting Job

4-9

4.8 Reference Parameter setting for different materials

4-10

5. Basic Maintenance

5.1 Cleaning the cutting Plotter

5-1

5.2 Cleaning the Grid Drum

5-2

5.3 Cleaning the Pinch Rollers

5-2

Jaguar V User Manual

Table of Contents

6. Trouble Shooting

6.1 Non-Operational Problems

6-1

6.2 Operational Problems

6-2

6.3 Communication Problems

6-3

6.4 Software Problems

6-4

6.5 Cutting Quality Problem

6-5

Appendix

A-1

Jaguar V Specification

A-1

A-2

Blade Specification

A-2

A-3

CorelDraw Output

A-3

Jaguar V User Manual

General Information 1-1

Chapter 1 General Information

1.1 Introduction

Jaguar V series cutting plotters have been designed to produce computer-generated images

or perform cutting on sheets or rolls of vinyl media.

‧J5-160

for media width: 250mm(9.8”) ~ 1782mm(70.2”)

1.2 Package Items

The package of the Jaguar V model contents the items listed below, please check carefully.

If you find any item missing, please consult your local dealer for further assistance.

1. Cutting Plotter

2. Stand Set and Media Take-up System

2 pieces of T-shape stands

–4 pieces of Dancer Guiders

–2 pieces of Roll Holder Supports

–1 piece of Control Board

2 pieces of Stand Bases

1 piece of stand beam

2 pieces of Paper Take-up

2 pieces of Dancer Bars

1 piece of Installation Guide for Stand Set

3. Accessories

1 piece of User’s Compact Disk

1 piece of AC power Cord

1 piece of data cable (USB cable: 3m)

1 set of Blade Holder Assembly (Installed in tool carriage of the cutting

plotter)

1 piece of Blade (Installed in Blade Holder)

1 piece of Safe Blade

1 piece of Cutting Pad for Vinyl cutting

1 piece of Tweezers

1 piece of Promise Card

1 piece of Corrugated Pipe

2 pieces of Feed shafts

1 piece of Hexagonal Wrench (M6)Φ5

1 piece of Hexagonal Wrench (M5)Φ4

1 piece of Hexagonal Wrench (M4)Φ3

1 piece of RJ45 Cable

1 sets of Conductive Copper Wire Assembly

14 pieces of M6 screws

4 pieces of Paper Hubs ( 3”black colored )

Jaguar V User Manual

General Information 1-2

1.3 Product Features

The following are the main features of the Jaguar V series cutting plotters:

‧Triple-port connectivity provides you with greater flexibility

‧Up to 600 gram cutting force

‧Up to 1530 mm per second (60 ips) cutting speed (at 45°direction)

‧Guaranty 10-meter tracking

‧User friendly and multi-language control panel

‧Media take-up system

1.4 Appearance of Jaguar V

1.4.1 The Front View (Figure 1-1)

Control panel –consists of 14

control keys and 1 LED and 1 LCM

showing messages and menus.

Cutting Pad –provides the

protection of blade when the blade is

cutting.

Tool Carriage –performs the

cutting with the installed blade

and pen with AAS module.

Alignment Rulers –

media can be aligned

with the clear guide line

marks.

Grid Drums –move

the media back and

forth during operation.

Slicer Groove –

slice off the extra

media easily along

this groove.

Platen –provides the

surface for holding and

supporting media while

performing cutting.

Figure 1-1

Jaguar V User Manual

General Information 1-3

1.4.2 The Back View (Figure 1-2)

1.4.3 The Left-hand Side (Figure 1-3)

Pinch Rollers –

hold the media during

cutting.

Lever –

raises or lowers the

pinch rollers.

Figure 1-2

Figure 1-3

Jaguar V User Manual

General Information 1-4

1.4.4 The Right-hand Side (Figure 1-4)

Fuse –3 Amp.

AC Power Connector –used to insert the

AC power cord.

Power Switch for Cutting Plotter –On when

switches to [I]; Off to [O]

Serial Interface Connector (RS232C) –

used to connect the cutting plotter to a

computer through a serial interface cable.

Figure 1-4

USB Connector –used to connect the

cutting plotter to a computer through a

USB cable.

Ethernet Connector–used to connect your

cutting plotter to a local area network.

Power Switch for Take up System –On when

switches to [I]; Off to [O]

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali GCC Technologies Plotter

GCC Technologies

GCC Technologies RX II Series Manuale utente

GCC Technologies

GCC Technologies Jaguar II Series Manuale utente

GCC Technologies

GCC Technologies Puma Series Manuale operativo

GCC Technologies

GCC Technologies Expert 52 Manuale utente

GCC Technologies

GCC Technologies Jaguar IV Series Manuale utente

GCC Technologies

GCC Technologies EXPERT 24 Manuale utente

GCC Technologies

GCC Technologies EXPERT 24 LX Manuale utente

GCC Technologies

GCC Technologies Jaguar IV Series Manuale utente

GCC Technologies

GCC Technologies EXPERT 24 LX Manuale utente

GCC Technologies

GCC Technologies EP-60 Manuale utente

GCC Technologies

GCC Technologies P3-60 Manuale utente

GCC Technologies

GCC Technologies puma iii series Manuale utente

GCC Technologies

GCC Technologies BENGAL Manuale utente

GCC Technologies

GCC Technologies J5 Series Manuale utente

GCC Technologies

GCC Technologies AR-24 Manuale utente

Manuali Plotter popolari di altre marche

MUTOH

MUTOH Kona 760 Manuale utente

HP 7475a Manuale utente

Vulcan-Hart

Vulcan-Hart FC-500VC Manuale utente

Roland

Roland TrueVIS VG-640 Manuale del proprietario

Furuno

Furuno RP-180 Manuale utente

Roland

Roland VersaCamm SP-540V Manuale utente

MIMAKI

MIMAKI CF2 Series Manuale utente

Ioline

Ioline Summit Manuale utente

Summa

Summa S CLASS Manuale utente

Gerber Technology

Gerber Technology GERBERplotter MP Series Manuale utente

Furuno

Furuno RP-17 Manuale utente

HP 7470A Manuale utente

SII

SII LP-1010 Manuale utente

Great Computer

Great Computer JII-61 Manuale utente

Roland

Roland VersaUv LEF - 12i Manuale utente

Lectra

Lectra Alys 120 Manuale utente

MUTOH

MUTOH Ultima SC-850D Manuale utente

Skycut

Skycut D Series Manuale utente