GCC Technologies Expert 52 Manuale utente

V.6 2014 Mar

EXPERT 52

CUTTING PLOTTER

User Manual

Great Computer Corporation ©

V.6 2014 Mar

NOTICE

GCC reserves the right to modify the information contained in this user

manual at any time without prior notice; un-authorized modification, copying

distribution or display is prohibited. All comments, queries or

suggestions concerning this manual please consult with your local dealer.

Expert52usermanual

Important Information

Thank you for purchasing the Expert 52 Cutting Plotter.

Before you use the cutting plotter, please make sure that you have read the

safety precautions and instructions below.

Caution

SAFETYPRECAUTIONS!

For safety concern, please always hold the cutter firmly from the bottom while moving

it. Do not move the cutter by clasping the depression area on both sides.

Do not shake or drop the blade holder, a blade tip can fly out.

During an operation, do not touch any of the moving parts of this machine (such as the

carriage). Also be careful to make sure that clothing and hair do not get caught.

Always connect the power cable to a grounded outlet.

Always use the accessory power cable which is provided. Do not wire the power cable

so that it becomes bent or caught between objects.

Do not connect the power cable to branching outlet to which other machines are also

connected, or use an extension cable. There is danger of overheating and of

mis-operation of the machine.

Keep the tools away from children where they can reach.

Always put the pinch rollers within the white marks.

Important Information

O (correct) X (Incorrect)

Expert 52 user manual

Table of Contents

Important Information

1. General Information

1.1 Package Items 1-1

1.2 Product Features 1-1

1.3 The Appearance 1-2

2. Installation

2.1 Precaution 2-1

2.2 Stand Installation 2-2

2.3 Blade Installation 2-7

2.4 Instruction of Damper Roller 2-9

2.5 Media Loading 2-10

2.6 2.6.1 Loading the Sheet Media 2-10

2.6.2 Loading the Roll Media 2-12

2.6.3 How to Change the Poll Size Without Turning off the

Machine? 2-12

2.7 Cable Connections 2-13

2.7.1 USB Interface 2-13

2.7.2 Driver Un-installation 2-16

2.7.3 RS-232 Interface 2-19

2.7.4 Printer Sever Shared Setting 2-19

3.Operation

3.1 The Control Panel 3-1

3.2 VLCD 3-2

3.3 File Uploader 3-5

3.4 Data Transmission 3-6

3.5 Expert 52 Print Driver setting 3-9

3.5.1 Option Page 3-9

3.6 Reference Parameter setting for different materials 3-11

4. Basic Maintenance

4.1 Cleaning the Cutting Plotter 4-1

4.2 Cleaning the Grid Drum 4-1

4.3 Cleaning the Pinch Rollers 4-2

5. Trouble Shooting

5.1 What if Expert 52 cannot Operate? 5-1

5.2 Light Indicators 5-1

5.3 Cutting Quality Problems 5-3

Appendix

A-1

Expert 52 Specification A-1

A-2

Blade Specification A-2

A-3

CorelDRAW Instruction A-3

A-4 DirectCut A-4

Expert 52 user manual

General Information 1-1

1.1 Package Items

The package of Expert 52 contents the items listed below, please check carefully.

If you find any item missing, please consult your local dealer for further assistance.

1.2 Product Features

The followings are the main features of the Expert 52 cutting plotters:

‧Dual-port connectivity – USB & Serial interface.

‧Up to 250 gram cutting force.

‧ Up to 400 mm/per second cutting speed.

‧ Guaranty 3 meter (10’) tracking.

Item Quantity

Cutting Plotter 1 Set

Accessories 1 Set

1. Installation CD 2. AC Power Cord 3. Cutting Pad

4. USB Cable (1.8m) 5. Tweezers 6. Paper Slicer

1. General Information

Expert 52 user manual

General Information 1-2

1.3 The Appearance (EX-52)

1.3.1 The Front View

Object Description

Primary Pinch Roller To help hold the media during cutting.

Slicing Groove To help slice off media.

Alignment Ruler To align media with clear guideline marks

Tool Carriage Performs the cutting with the installed blade or pen.

Blade Holder To hold the blade.

F Platen The surface for holding and supporting media in operation.

Cutting Pad To protect blade and plate in operation.

Control Panel To consist of 10 control keys and 6 LED lights.

J Grid Drum To move media back and forth in operation

Figure 1-1

Figure 1-2

Expert 52 user manual

General Information 1-3

1.3.2 The Side Views

Object Description

AC Power Connector To insert the AC power cord.

L Fuse 3Amp.

Power Switch To turn on or off the machine.

USB Connector To connect the machine and a computer through a

USB cable.

Serial Interface Connector To connect the machine and a computer through a

RS-232 cable.

K L M

Figure 1-3

Figure 1-4

N O

Expert 52 User Manual

Installation 2-1

2.1 Precaution

Please read below information carefully before you start installation.

Notice 1



Make sure the power switch is off before installing the cutting plotter.



Carefully handle the cutter to prevent any injuries.

Notice 2 Choosing a proper place before setting up the cutting plotter

Before installing your cutting plotter, select a suitable location, which meets the following

conditions.



The machine can be approached easily from any direction.



Keep enough space for the machine, accessories and supplies.



Keep the working area stable, avoiding severe vibration.



Keep the temperature between 15 and 30

℃

℃℃

℃

(60-86

F) in the workshop.



Keep the relative humidity between 25% and 75% in the workshop.



Protecting the machine from dust and strong air current.



Preventing the machine from direct sunlight or extremely bright lighting.

Notice 3 Connecting the Power Supply

Check the plug of the power cord to see if it mates with the wall outlet. If not, please contact

your dealer.



Insert the plug (male) into a grounded power outlet.



Insert the other end (female) of power cord into the AC connector of cutting plotter.

2. Installation

Expert 52 User Manual

Installation 2-2

2.2 Stand Installation

Please follow the procedures below for assembling the stand.

Step 1 Please examine the supplied items in the accessory box of the stand carton

before you install:

1 Left side vertical stand

1 Right side vertical stand

1 Support for left side

1 Support for right side

1 Stand Beam

2 Bottom Stands with wheels

2 Sliding brackets for paper take up

1 Hex Wrench (M5)Φ4

28 Socket flat head screws(M6*12L)

1 Installation Guide

Step 2

Position the Left side vertical stand perpendicularly to part and put the screws into the

holes and tighten them to form a left side T-stand (Figure 2-1). Repeat the same steps with the

Right side vertical stand.

Left side vertical stand



Bottom Stand

Figure 2-1

Expert 52 User Manual

Installation 2-3

Step 3

Place the stand beam upright on the T-stand and put the screws into the holes but do not

tighten them at this step.

Step 4

Remove the cutting plotter from the carton. Position the stand under the plotter, and insert the

screws into the holes on the bottom of the plotter and tighten them up as shown in Figure 2-3.

T-stand

Stand Beam

Figure 2-2

Figure 2-3

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali GCC Technologies Plotter

GCC Technologies

GCC Technologies EXPERT 24 Manuale utente

GCC Technologies

GCC Technologies Jaguar II Series Manuale utente

GCC Technologies

GCC Technologies J5 Series Manuale utente

GCC Technologies

GCC Technologies Jaguar IV Series Manuale utente

GCC Technologies

GCC Technologies AR-24 Manuale utente

GCC Technologies

GCC Technologies EP-60 Manuale utente

GCC Technologies

GCC Technologies Jaguar IV Series Manuale utente

GCC Technologies

GCC Technologies Puma Series Manuale operativo

GCC Technologies

GCC Technologies puma iii series Manuale utente

GCC Technologies

GCC Technologies EXPERT 24 LX Manuale utente

GCC Technologies

GCC Technologies RX II Series Manuale utente

GCC Technologies

GCC Technologies EXPERT 24 LX Manuale utente

GCC Technologies

GCC Technologies BENGAL Manuale utente

GCC Technologies

GCC Technologies P3-60 Manuale utente

GCC Technologies

GCC Technologies Jaguar V Series Manuale utente

Manuali Plotter popolari di altre marche

MUTOH

MUTOH Kona 760 Manuale utente

HP 7475a Manuale utente

Vulcan-Hart

Vulcan-Hart FC-500VC Manuale utente

Roland

Roland TrueVIS VG-640 Manuale del proprietario

Furuno

Furuno RP-180 Manuale utente

Roland

Roland VersaCamm SP-540V Manuale utente

MIMAKI

MIMAKI CF2 Series Manuale utente

Ioline

Ioline Summit Manuale utente

Summa

Summa S CLASS Manuale utente

Gerber Technology

Gerber Technology GERBERplotter MP Series Manuale utente

Furuno

Furuno RP-17 Manuale utente

HP 7470A Manuale utente

SII

SII LP-1010 Manuale utente

Great Computer

Great Computer JII-61 Manuale utente

Roland

Roland VersaUv LEF - 12i Manuale utente

Lectra

Lectra Alys 120 Manuale utente

MUTOH

MUTOH Ultima SC-850D Manuale utente

Skycut

Skycut D Series Manuale utente