Gecko In.Touch 0608-521012 Manuale utente
in.touch techbook
11
Table of contents
Warnings ...................................................................................................... 2
Compatibility requirements ................................................................................. 2
Overview ...................................................................................................... 3
OEM installation .............................................................................................. 3
Connections .................................................................................................. 4
Set up the in.touch system ................................................................................... 4
Connect your iDevice with your spa ........................................................................ 5
Download application ....................................................................................... 5
Set the connection ........................................................................................... 5
Start the in.touch application ................................................................................ 6
Home page ................................................................................................... 6
Spa section .................................................................................................... 7
Spa Experiences .............................................................................................. 8
Start accessories .............................................................................................. 9
Stop accessories .............................................................................................. 9
Water temperature ........................................................................................... 9
Water Care ................................................................................................... 10
Maintenance ................................................................................................. 12
Error Management .......................................................................................... 12
Updating in.touch ........................................................................................... 14
Troubleshooting ............................................................................................. 16
Specifications ................................................................................................ 18
Regulatory Compliance Information ....................................................................... 18
2
in.touch techbook
WARNINGS:
Before installing or connecting the unit, please read the following.
* FOR OPTIMUM PERFORMANCE PLEASE CAREFULLY READ THE MANUAL BEFORE INSTALLATION.
* INSTALL THE MODULE AT LEAST 12 INCHES (30 CM) AWAY FROM ANY METAL PART OR
ANY METAL FOIL.
* THE MODULE SHOULD BE INSTALLED SO IT CAN BE RELOCATED UNDER THE SPA TO OBTAIN THE
OPTIMUM RECEPTION SPECIFIC FOR FINAL INSTALLATION OF THE SPA IN THE YARD.
* TO SATISFY FCC RF EXPOSURE REQUIREMENTS FOR MOBILE AND BASE STATION TRANSMISSION
DEVICES, A SEPARATION DISTANCE OF 8 INCHS (20 CM) OR MORE SHOULD BE MAINTAINED
BETWEEN THE IN.TOUCH MODULE AND PERSONS DURING OPERATION. TO ENSURE
COMPLIANCE, OPERATION AT CLOSER THAN THIS DISTANCE IS NOT RECOMMENDED.
* THE ANTENNA(S) USED FOR THIS TRANSMITTER MUST NOT BE CO-LOCATED OR OPERATING IN
CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER.
Warnings
Compatible with:
iPod touch 3g - 4g
iPad - iPad 2
iPhone 3G - 3GS - 4 - 4S
Compatibility requirements
In.touch module:
Model: 0608-521012 IN.TR-IT-P1-P2-P3-P4-CO
Model: 0608-521011 IN.TR-IT-P1-P2-P3-P4-P5
Spa controller compatible:
Aeware in.pac with compatible software revision
In.touch application:
Aeware®, Gecko®, and their respective logos are Registered Trademarks of Gecko Alliance Group.
in.touch™, in.xm2™, and in.therm™, and their respective logos are Trademarks of Gecko Alliance Group.
All other product or company names that may be mentioned in this publication are tradenames, trademarks or
registered trademarks of their respective owners.
in.touch techbook
3
Model: 0608-521011
IN.TR-IT-P1-P2-P3-P4-P5
Model: 0608-521012
IN.TR-IT-P1-P2-P3-P4-CO
To spa pack
Antenna area Antenna area
To spa pack
Fastening
bracket
Fastening
bracket
"AC" enclosure keyings
Overview
OEM installation
The unit must be installed under the skirt, at least 12 inches (30 cm) away from any metal component or structure.
This is necessary to ensure the proper transmission.
In some cases, it will be necesssary to relocate the unit once the spa is installed in the yard, to ensure the proper
signal transmission and distance. Install the in.touch so the module can be repositioned by spa owners to optimize
the signal strength in their yard.
We recommend that you install the unit with #8 PAN head screws.
Here are suggestions for a successful installation:
• Install the unit as high as possible in the spa skirt, but keep it away from the spa frame if its metal.
• Route the cable and leave some loose, so the in.touch can be moved in case of reception problems.
• Installing the in.touch in a corner of the spa may help to avoid metalic components in proximity of
the in.touch.
• The in.touch module should be installed as close as possible to the house to optimize the signal strength. It is
recommended to install the side of the spa with the in.touch module facing the house, to increase the signal.
"AC" enclosure keyings
"CO" enclosure keyings
LD
4
in.touch techbook
Connections
There are two different models of the in.touch module; one model has 5 ports to connect auxiliary keys “AC” and the
other has 4 ports for auxiliary keys plus a communication port “CO”. Those switches will turn the
corresponding accessories on and off.
Set up the in.touch system
Turn off the power before connecting the in.touch to the Aeware spa pack (in.xm2 or other compatible model).
Simply connect the in.touch to the Aeware spa pack (See the illustration). The cable of the in.touch module shoud be
connected to the CO port of the spa pack.
Note: Before powering the Aeware spa pack, make sure all accessories are linked to the bonding connector and
connected to the spa pack. Make sure that the spa pack door is closed, then turn on the breaker.
For more details, please refer to the techbook for your Aeware spa pack. Please refer to the web site in the section
in.touch to see the list of Aeware spa packs compatible with the in.touch module.
P1
in.xm2
(or any Aeware spa pack)
or "CO" Communication
Port expansion
"AC" Auxiliary switch ports
P2 P4P3
P5/Blower
in.touch techbook
5
Connect your iDevice with your spa
The in.touch module has a built-in Wi-Fi transeiver that allows you to communicate with your favorite iOS devices.
The connection will be point-to-point (ad hoc mode) with your spa.
The following steps will show you how to connect with your spa.
in.touch module
Download application
The in.touch application has been designed to enhance your interaction with your spa. This app is waiting for you at
the App store — search for in.touch then click on it to install it.
Set the connection
On your iDevice, go to the Wi-Fi section of Settings.
The network named in.touch should appear on the list.
Press on it to select the in.touch network.
Once you've selected it, wait until the Wi-Fi icon appears on the top left
corner of the screen. This icon shows that your iDevice is now connected
to the network.
Please note that with some iDevices and different versions of the iOS,
the icon may not appear as connected even if it is connected.
After 30 seconds if it does not appear, make sure that the in.touch network
is checked and proceed to the next step.
Wi-Fi icon
6
in.touch techbook
Home page
The in.touch home page is your portal to warm water
therapy.
On this page, you have access to the popular spa
features you want: spa experiences for any mood,
easy access to each device on your tub, the industry’s
easiest water care management, temperature setting,
maintenance reminders, and new products and features
from your spa manufacturer.
When all accessories appear, your app and your in.touch
are ready to be used.
Start the in.touch application
Find the newly downloaded in.touch application, then tap on it to open it.
The page Configuring a Spa will then appear. Once you are connected to
the in.touch (described in the previous step), tap Done. You're now ready
to control your spa!
Spa section
Spa Experience section
Accessories section
Water Temperature section
Water Care section
Maintenance section
News section
in.touch techbook
7
Spa section
The first section indicates your spa name. If you are in Demo Mode,
it displays Demo.
Tapping on this section opens a spa menu.
The spa menu lists all available spas. Each spa is displayed with its MAC
address and its name. You can select the spa that you want to control
from the list or tap on Demo to open the spa page in Demo Mode.
You can change the spa name by tapping on the blue arrow to open its
spa configuration page.
In the spa details page,
• you can rename your spa
• you have information about system software releases
(in.xm, in.therm)
• you can rename all spa accessories
8
in.touch techbook
Spa Experiences
Choose one of the pre-set experiences by tapping on it: Beach Party
(all on), Gentle Movement (pumps, blower and lights on low), Kids (the
perfect mood for youngsters) or Relaxation (a silent soak). To customize
your favorite setting, choose His or Hers, adjust the settings to your needs,
and save. Your customized profile will be ready to use every time, and
can be changed as needed.
Each accessory will start as it is configured in the spa experience that is
selected. For safety reasons, all accessories start with a delay to prevent
from overcharging the system. You will see the accessory icons turn on
one after another.
Save spa experience:
If you change the accessories programmed in a spa experience by
tapping on an accessory icon, a Save key appears and you have the
option to save the new program.
Save key
in.touch techbook
9
Start accessories
To start an accessory, tap on the icon. The icon will be grey and inactive
for few seconds before turning on and becoming animated. Icons on the
in.touch screen will reflect the speed or state of the devices running on
your spa.
When an accessory is started, a runtime icon appears on the upper right
hand side of your screen. It indicates the remaining running time of
the accessory. When several accessories are running, the first selected
accessory fixes the runtime.
Stop accessories
You can stop an activated accessory by tapping on the accessory icon
one more time. For multi-speed accessories, tap again until the device
turns off.
You can tap on the large button Tap here to turn all accessories off to turn
off all accessories at the same time.
Water temperature
The temperature screen allows you to modify the temperature of your
spa. It is also posible to override the water care by activating the Manual
Economy Mode. In economy mode the temperature setting will be
maintained 20°F* less than the set point.
*Default pack value
Runtime icon
10
in.touch techbook
Water Care
The Water Care section will help you set up your filtration and heating
settings. Choose from Away from Home, Beginner, Energy Savings, Super
Energy Savings, and Weekender, depending on your need.
To modify a Water Care setting just tap on the blue arrow. It will open the
selected Water Care menu.
In Energy Savings mode, the set point will be reduced by 20°F*, which
means that the heating system will not be engaged unless the temperature
falls to 20°F below the spa's set temperature.
The filtration schedule shown on the screen will apply to the main
filtration pump, most likely pump 1. If your spa uses a circulation pump
configured to run 24 hours, the screen will show you the purge setting
instead of filtration. The purges are pre-programmed for a fixed number
of minutes, therefore the duration time will not appear on the screen, and
only the start time can be modified.
You can return to the manufacturer settings by tapping on Factory
Settings key.
*Default pack value
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Gecko Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
