Gefen HDMI-CAT5-444 Manuale utente

www.gefen.com

4x4 HDMI Over

CAT-5 Matrix

EXT-HDMI-CAT5-444

User Manual

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen Inc.

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and

any accompanying documentation without prior written notice.

4x4 HDMI™ Over CAT5 Matrix is a trademark of Gefen Inc.

All trademarks are the property of their respective companies

ASKING FOR ASSISTANCE

CONTENTS

1 Introduction

2 Operation Notes

3 Features

4 Sender Panel Layout

5 Sender Panel Descriptions

6 Sender Panel Descriptions

7 Receiver Panel Layout

8 Sender Panel Descriptions

9 RMT-4IR Remote Description

10 Connecting And Operating The 4x4 HDMI™ Over Cat5 Matrix

11 4x4 HDMI™ Over Cat5 Matrix Jumper Diagram

12 Operating The 4x4 HDMI™ Over Cat5 Receiver

13 Conﬁguring The 4x4 HDMI™ Over Cat5 Receiver

16 Network Cable Wiring Diagram

17 EDID Dip Switch Guidelines

18 RS-232 Serial Control Interface

19 SpeciﬁcatIons

20 Warranty

Congratulations on your purchase of the 4x4 HDMI™ Over CAT5 Matrix. Your

complete satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions

that harness integration, extension, distribution and conversion technologies.

Gefen’s reliable, plug-and-play products supplement cross-platform computer

systems, professional audio/video environments and HDTV systems of all sizes

with hard-working solutions that are easy to implement and simple to operate.

The Gefen 4x4 HDMI™ Over CAT5 Matrix

The Gefen 4x4 HDMI™ CAT5 Matrix offers unprecedented ﬂexibility and con-

venience by routing high deﬁnition audio/video from any of four HDMI™ video

sources to any of 4 remote displays over inexpensive, standard CAT5 cabling.

Each remote display has a control box that allows the viewer to select any of the

4 video sources and control that source via an IR remote control as if the viewer

was standing in the room where the source originates.

Full High-Resolution HDTV signals are supported up to a resolution of 1080p at

a maximum distance of 150 feet and 1080i resolutions can be extended up to

300 feet. The Gefen 4x4 HDMI™ CAT5 Matrix works with HD-DVD players, TiVo

systems, HT PCs, and satellite set-top boxes that connect to an HDMI™ display.

Every source is accessible at all times by any display by selecting it with an IR

remote.

How It Works

You simply connect up to 4 local video sources to the CAT5-Matrix’s inputs. Then

run each of your CAT5 cables from the Matrix to the destination displays. At each

remote display, terminate the CAT5 cable run with a HDMI™ CAT5-MS Receiver

device. Connect each Receiver to a display and you’re all set.

INTRODUCTION

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE 4X4 HDMI™ OVER CAT5 MATRIX

To use the extender functionality of the• 4x4 HDMI™ Over CAT5 Matrix the

supplied 1 foot HDMI jumper cables must be used to connect the HDMI

output ports to the HDMI extension input ports. Please see page 11 for

details

Use two industry standard CAT-5, CAT-5e or CAT-6 cables to operate each• of the 4x4 HDMI™ Over CAT5 Receivers. Gefen recommends CAT-6 cabling

for maximum performance.

For 1080i video, maximum extension is 300 feet (91 meters).•

For 1080p video, maximum extension is 150 feet (45 meters).•

IR repeater functionality is only from the receiving unit to the sending unit. IR• data cannot be transmitted from the sending unit to the receiving unit.

When a display connects to a source being viewed by other displays, a short• ﬂash may appear momentarily on the displays already viewing that source.

This is normal operation as new handshakes for HDCP are being made.

Local displays that are not using the extension functionality of the 4x4• HDMI™ Over CAT5 Matrix can only switch their viewing source via the RS-

232 Serial Control Interface. Please see page 18 for a list of commands and

instructions.

OPERATION NOTES

Features

Switches easily between any four HDMI™ sources•

Sends up to four video inputs to any four remote HDMI™ displays•

Maintains 1920 x 1200, 1080p, and 2k resolution video•

Extends video up to 300 feet over CAT-5 cable•

Discrete IR remote (included)•

Serial RS-232 remote port•

Rack ears included•

HDMI™ compliant•

HDCP compliant•

Package Includes

(1) 4x4 HDMI CAT5 Matrix

(4) HDMI over CAT-5 Receiver/Remote

(4) RMT-4 IR Remote Controls

(4) 1 Foot HDMI Cables

(4) 6 Foot HDMI Cables

(4) 5V DC Power Supplies

(1) 24V DC Power Supply

(1) Set of Rack Ears

(1) User’s Manual

FEATURES

Front Panel

Back Panel

58 1114

18 19 20 21 22 23 24 25 26

91215

710 131617

234

SENDER PANEL LAYOUT

SENDER PANEL DESCRIPTIONS

Selected Source LED For HDMI Output 11 The selected source for HDMI Output 1 will be indicated by an active LED.

Selected Source LED For HDMI Output 22 The selected source for HDMI Output 2 will be indicated by an active LED.

Selected Source LED For HDMI Output 33 The selected source for HDMI Output 3 will be indicated by an active LED.

Selected Source LED For HDMI Output 44 The selected source for HDMI Output 4 will be indicated by an active LED.

HDMI Output 1 CAT5 Extension Ports5 DDC and video output ports for extension to remote receiver. Both cables

must be connected for proper operation.

HDMI 1 Extension Input Port6 For proper extension, the supplied 1 foot HDMI jumper cable must be

attached between this port (6) and HDMI Output Port 1 (22).

HDMI 1 IR Blaster Port7 Optional IR emitter (Part# EXT-2IREMIT) can be attached to relay IR

commands from the remote receiver to the blaster for remote control of

devices.

HDMI Output 2 CAT5 Extension Ports8 DDC and video output ports for extension to remote receiver. Both cables

must be connected for proper operation.

HDMI 2 Extension Input Port9 For proper extension, the supplied 1 foot HDMI jumper cable must be

attached between this port (9) and HDMI Output Port 2 (23).

HDMI 2 IR Blaster Port10 Optional IR emitter (Part# EXT-2IREMIT) can be attached to relay IR

commands from the remote receiver to the blaster for remote control of

devices.

HDMI Output 3 CAT5 Extension Ports11 DDC and video output ports for extension to remote receiver. Both cables

must be connected for proper operation.

HDMI 3 Extension Input Port12 For proper extension, the supplied 1 foot HDMI jumper cable must be

attached between this port (12) and HDMI Output Port 2 (24).

HDMI 3 IR Blaster Port13 Optional IR emitter (Part# EXT-2IREMIT) can be attached to relay IR

commands from the remote receiver to the blaster for remote control of

devices.

SENDER PANEL DESCRIPTIONS

HDMI Output 4 CAT5 Extension Ports14 DDC and video output ports for extension to remote receiver. Both cables

must be connected for proper operation.

HDMI 1 Extension Input Port15 For proper extension, the supplied 1 foot HDMI jumper cable must be

attached between this port (15) and HDMI Output Port 2 (24).

HDMI 4 IR Blaster Port16 Optional IR emitter (Part# EXT-2IREMIT) can be attached to relay IR

commands from the remote receiver to the blaster for remote control of

devices.

RS-232 Serial Control Port17 Switching can be controlled via the RS-232 port. Please see page 18 for

details on the available commands and pin-outs.

HDMI Input 118 Connect a source device to this input.

HDMI Input 219 Connect a source device to this input.

HDMI Input 320 Connect a source device to this input.

HDMI Input 421 Connect a source device to this input.

HDMI Output 122 Connect a display to this output port. If using the built-in extension

functionality, connect this output port (22) to the HDMI 1 extension input port

(6) using the supplied 1 foot HDMI jumper cable.

HDMI Output 223 Connect a display to this output port. If using the built-in extension

functionality, connect this output port (23) to the HDMI 2 extension input port

(9) using the supplied 1 foot HDMI jumper cable.

HDMI Output 324 Connect a display to this output port. If using the built-in extension

functionality, connect this output port (24) to the HDMI 3 extension input port

(12) using the supplied 1 foot HDMI jumper cable.

HDMI Output 425 Connect a display to this output port. If using the built-in extension

functionality, connect this output port (25) to the HDMI 4 extension input port

(15) using the supplied 1 foot HDMI jumper cable.

24V DC Power Input26 Connect the supplied 24V DC Power supply to this input.

Front Panel

Back Panel

Top Panel

5789

RECEIVER PANEL LAYOUT

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Gefen Commutatore a matrice

Gefen

Gefen EXT-HDFST-848CPN Manuale utente

Gefen

Gefen EXT-DVI-16416 Manuale utente

Gefen

Gefen EXT-HD-SL-444 Manuale utente

Gefen

Gefen EXT-DVI-16416 Manuale utente

Gefen

Gefen EXT-COMPAUD-CAT5-444 Manuale utente

Gefen

Gefen EXT-HDMI1.3-444 Manuale utente

Gefen

Gefen ToolBox GTB-HD4K2K-642-BLK Manuale utente

Gefen

Gefen GEF-DVI-16416 Manuale utente

Gefen

Gefen EXT-HDFST-848CPN Manuale utente

Gefen

Gefen DVIKVM-444N Manuale utente

Gefen

Gefen GEF-DVI-848DL-PB Manuale utente

Gefen

Gefen EXT-HDMI1.3-444 Manuale utente

Gefen

Gefen ex-tend-it 4x4 HDTV Matrix Manuale utente

Gefen

Gefen GEF-DVI-848DL-PB Manuale utente

Gefen

Gefen COMPAUD-44424 Manuale utente

Gefen

Gefen EXT-RMT-MATRIX-444 Manuale utente

Gefen

Gefen EXT-HDMI-CAT5-444 Manuale utente

Gefen

Gefen 4x4 HDMI Manuale utente

Gefen

Gefen EXT-HDTV-444N Manuale utente

Gefen

Gefen 4x4 HDTV KVM Matrix Manuale utente

Gefen

Gefen EXT-HDMI1.3-444 Manuale utente

Gefen

Gefen EXT-HDMI1.3-444 Manuale utente

Gefen

Gefen EXT-VGAAUD-444 Manuale utente

Gefen

Gefen EXT-COMPAUD-44424 Manuale utente

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

CYP

CYP nT15GX01 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette