Gema CM30 Manuale utente
Your global partner for high quality powder coating
CM30 with OptiCenter OC03
Operator
Quick Guide
Switch on the plant V 01/16 CM30 Start-up
Switch on the plant
1. Turn the key switch on 1
2. Touch the screen
3. Log in with user name and password
3.1
3.2
3.3
3.4
CM30 Start-up V 01/16 Switch on the plant
3.5
3.6
4. Referencing axes
5. Select the Coating mode
6. This mask is displayed
Switch on the plant V 01/16 CM30 Start-up
!!Caution!!
In Waste powder mode only fresh powder is used.
There is NO powder recovered!
It is imperative to switch to the Recovery mode after a
certain period!
On the OptiCenter
7. Put the powder bag into the FP cone, place
the cover and insert the FP lance 8. Select the Waste powder mode
9. Confirm the RP hose position
CM30 Start-up V 01/16 Switch off the installation
Switch off the installation
1. Exit the Cleaning mode
2. Press the Standby key
3. Exit Standby
4. Press the Exit key
5. Turn the key switch on 0
Color change / Cleaning mode V 01/20 CM30 Start-up
Color change / Cleaning mode
On the CM30 panel
1. Exit the Coating mode
2. Select the Cleaning mode
3. Close the doors
4. Coarse cleaning of the booth
5. Clean the outside of the guns
(only in case of a foreign booth or if there are
no doors)
CM30 Start-up V 01/16 Color change / Cleaning mode
On the OptiCenter
7. Exit the Coating mode
8. Select the Cleaning mode
9. Select the cleaning possibility
10. Put the fresh powder lance in the park
position
11. Move the FP cone under OptiSpeeder
12. Pres the "Emptying OptiSpeeder" key 2x
Color change / Cleaning mode V 01/16 CM30 Start-up
13. Move back the FP cone
14. Change the recovery hose position
15. Confirm
16. The sequence continues to run
automatically
17. Wait until this mask is displayed
18. Clean the OptiSpeeder, place the cover
CM30 Start-up V 01/16 Color change / Cleaning mode
19. Connect the RP hose to the "Cleaning"
connection
20. Confirm
21. Remove powder bag, clean the OC
thoroughly
22. Fine booth cleaning
23. Clean the ducting
24. Clean and remove the sieve
Color change / Cleaning mode V 01/16 CM30 Start-up
25. Start recovery hose cleaning
26. Clean the cone
27. Clean the cyclone, use only one nozzle at the
time
28. Insert the sieve and close the cyclone
29. Place the bag with new color, connect the RP
hose to the "Waste" connection
30. Exit the Cleaning mode
Questo manuale è adatto per i seguenti modelli
1
Altri manuali Gema Unità di controllo
Gema
Gema OptiStar 4.0 Guida
Gema
Gema OptiStar 4.0 Guida
Gema
Gema OptiMove CR07 Guida
Gema
Gema OptiMove CR08 Guida
Gema
Gema MagicControl 4.0 Manuale utente
Gema
Gema OptiStar CG08-C Guida
Gema
Gema MultiStar CG10 Guida
Gema
Gema OptiStar CG06 Guida
Gema
Gema OptiStar All-in-One Guida
Gema
Gema OptiCenter OC09 Guida
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
