Gemalto Cinterion EMS31-US Guida all'installazione

GEMALTO.COM/M2M

Cinterion®EMS31-US

Hardware Interface Overview

Version: 00.103

DocId: EMS31_US_HIO_v00.103

GENERAL NOTE

THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD-

UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY

EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS

INFORMATION ON GEMALTO M2M PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE

SUBJECT TO CHANGE AT GEMALTO M2M'S DISCRETION. GEMALTO M2M GMBH GRANTS A NON-

EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANSFER, COPY,

MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISASSEMBLE OR

DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY

AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY

AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, GEMALTO M2M GMBH DISCLAIMS ALL WARRANTIES AND LIABILITIES.

THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY

REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIV-

ERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CONSTRUED

ACCORDING TO GERMAN LAW.

Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con-

tents and communication thereof to others without express authorization are prohibited. Offenders will be

held liable for payment of damages. All rights created by patent grant or registration of a utility model or

design patent are reserved.

Trademark Notice

Gemalto, the Gemalto logo, are trademarks and service marks of Gemalto and are registered in certain

countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corpora-

tion in the United States and/or other countries. All other registered trademarks or trademarks mentioned

in this document are property of their respective owners.

EMS31_US_HIO_v00.103 2017-11-27

Confidential / Preliminary

Cinterion®EMS31-US Hardware Interface Overview

Page 2 of 33

Document Name: Cinterion®EMS31-US Hardware Interface Overview

Version: 00.103

Date: 2017-11-27

DocId: EMS31_US_HIO_v00.103

Status: Confidential / Preliminary

Cinterion®EMS31-US Hardware Interface Overview

Contents

EMS31_US_HIO_v00.103 2017-11-27

Confidential / Preliminary

Page 3 of 33

Contents

1 Introduction.................................................................................................................6

1.1 Key Features at a Glance .................................................................................. 6

1.2 EMS31-US System Overview ............................................................................ 8

2 Interface Characteristics............................................................................................9

2.1 Application Interface .......................................................................................... 9

2.1.1 Serial Interface ASC0 ........................................................................... 9

2.1.2 Serial Interface ASC1 ......................................................................... 10

2.1.3 UICC/SIM/USIM Interface................................................................... 11

2.1.4 GPIO Interface .................................................................................... 13

2.1.5 Control Signals.................................................................................... 14

2.1.5.1 Status LED .......................................................................... 14

2.2 RF Antenna Interface....................................................................................... 14

2.2.1 Antenna Installation ............................................................................ 15

2.3 Sample Application .......................................................................................... 16

3 Operating Characteristics........................................................................................18

3.1 Operating Modes ............................................................................................. 18

3.2 Power Supply................................................................................................... 18

4 Mechanical Dimensions, Mounting and Packaging...............................................19

4.1 Mechanical Dimensions of EMS31-US ............................................................ 19

5 Regulatory and Type Approval Information...........................................................21

5.1 Directives and Standards................................................................................. 21

5.2 SAR requirements specific to portable mobiles ............................................... 23

5.3 Reference Equipment for Type Approval......................................................... 24

5.4 Compliance with FCC and ISED Rules and Regulations................................. 25

6 Document Information..............................................................................................27

6.1 Revision History ............................................................................................... 27

6.2 Related Documents ......................................................................................... 27

6.3 Terms and Abbreviations ................................................................................. 27

6.4 Safety Precaution Notes .................................................................................. 31

7 Appendix....................................................................................................................32

7.1 List of Parts and Accessories........................................................................... 32

Cinterion®EMS31-US Hardware Interface Overview

Ta bles

EMS31_US_HIO_v00.103 2017-11-27

Confidential / Preliminary

Page 4 of 33

Tables

Table 1: Signals of the SIM interface (SMT application interface) ............................... 11

Table 2: GPIO lines and possible alternative assignment............................................ 13

Table 3: Return loss in the active band........................................................................ 14

Table 4: Overview of operating modes ........................................................................ 18

Table 5: Directives ....................................................................................................... 21

Table 6: Standards of North American type approval .................................................. 21

Table 7: Standards of GCF and PTCRB type approval ............................................... 21

Table 8: Requirements of quality ................................................................................. 21

Table 9: Standards of the Ministry of Information Industry of the

People’s Republic of China............................................................................ 22

Table 10: Toxic or hazardous substances or elements with defined concentration

limits............................................................................................................... 22

Table 11: Antenna gain limits for FCC and ISED........................................................... 25

Table 12: List of parts and accessories.......................................................................... 32

Table 13: Molex sales contacts (subject to change) ...................................................... 32

Cinterion®EMS31-US Hardware Interface Overview

Figures

EMS31_US_HIO_v00.103 2017-11-27

Confidential / Preliminary

Page 5 of 33

Figures

Figure 1: EMS31-US system overview............................................................................ 8

Figure 2: Serial interface ASC0....................................................................................... 9

Figure 3: Serial interface ASC1..................................................................................... 10

Figure 4: External UICC/SIM/USIM card holder circuit ................................................. 12

Figure 5: Schematic diagram of EMS31-US sample application................................... 17

Figure 6: EMS31-US - top and bottom view.................................................................. 19

Figure 7: Dimensions of EMS31-US (all dimensions in mm) ........................................ 20

Figure 8: Dimensions of EMS31-US (all dimensions in mm) - bottom view .................. 20

Figure 9: Reference equipment for Type Approval ....................................................... 24

Cinterion®EMS31-US Hardware Interface Overview

1 Introduction

EMS31_US_HIO_v00.103 2017-11-27

Confidential / Preliminary

Page 6 of 33

1 Introduction

This document1describes the hardware of the Cinterion®EMS31-US module. It helps you

quickly retrieve interface specifications, electrical and mechanical details and information on

the requirements to be considered for integrating further components.

The EMS31-US module includes a baseband, a complete dual band RF front-end, memory and

required circuitry to meet the 3GPP E-UTRA Long Term Evolution - LTE, Release 13 CAT M1

set of specifications.

1.1 Key Features at a Glance

1. The document is effective only if listed in the appropriate Release Notes as part of the technical docu-

mentation delivered with your Gemalto M2M product.

Feature Implementation

General

Frequency bands LTE Triband: B2, B4, B12

Output power Class 3 (+23dBm +-2dB) for LTE 1900, LTE HD-FDD B2

Class 3 (+23dBm +-2dB) for LTE AWS, LTE HD-FDD B4

Class 3 (+23dBm +-2dB) for LTE 700, LTE HD-FDD B12

Power supply 3.2V to 5.5V

Operating temperature

(board temperature)

Normal operation: -30°C to +85°C

Extended operation: -40°C to +95°C

Physical Dimensions: 27.60mm x 18.80mm x 2.05mm

Weight: approx. 2.2g

RoHS All hardware components fully compliant with EU RoHS Directive

LTE features

3GPP Release 13 DL 300 kbps, UL 375 kbps

LTE Cat. M1 data rates

SMS Point-to-point MT and MO

Text mode

Storage in mobile equipment

Software

AT commands Hayes, 3GPP TS 27.007, TS 27.005, product specific

SIM Application Toolkit SAT Release 99

Firmware update Generic update from host application over ASC0

OTA over ASC0

Cinterion®EMS31-US Hardware Interface Overview

1.1 Key Features at a Glance

EMS31_US_HIO_v00.103 2017-11-27

Confidential / Preliminary

Page 7 of 33

Interfaces

Module interface Surface mount device with solderable connection pads (SMT application

interface). Land grid array (LGA) technology ensures high solder joint reli-

ability and allows the use of an optional module mounting socket.

For more information on how to integrate SMT modules see also [3]. This

application note comprises chapters on module mounting and application

layout issues as well as on SMT application development equipment.

2 serial interfaces ASC0:

• 8-wire modem interface with status and control lines, unbalanced, asyn-

chronous

• Default baud rate: 115,200 baud

• Adjustable baud rates: 1,200 to 3,686,400

• Supports RTS0/CTS0 hardware flow control.

• Indication of incoming data/SMS on RING0 (can be used to wake up

host from power down modes)

ASC1 (shared with GPIO lines):

• 4-wire, unbalanced asynchronous interface

• Default baud rate: 115,200 baud

• Adjustable baud rates: 1,200 to 3,686,400bps

• Supports RTS1/CTS1 hardware flow control

UICC interface Supported SIM/USIM cards: 3V, 1.8V

Embedded UICC Module is hardware prepared for an embedded UICC (MIM)

GPIO interface 20 pads of the application interface programmable as GPIO pads (17) or

GPO pads (3):

GP(I)Os can be configured as ASC0 andASC1

Programming is done via AT commands

Antenna interface pad 50ΩLTE antenna

Power on/off, Reset

Power on/off Switch-on by hardware signal ON

Switch-off by AT command

Automatic switch-off in case of critical temperature and voltage conditions

Reset Orderly shutdown and reset by AT command

Evaluation kit

Evaluation module EMS31-US module soldered onto a dedicated PCB that can be connected

to an adapter in order to be mounted onto the DSB75.

DSB75 DSB75 Development Support Board designed to test and type approve

Gemalto M2M modules and provide a sample configuration for application

engineering. A special adapter is required to connect the EMS31-US evalu-

ation module to the DSB75.

Feature Implementation

Cinterion®EMS31-US Hardware Interface Overview

1.2 EMS31-US System Overview

EMS31_US_HIO_v00.103 2017-11-27

Confidential / Preliminary

Page 8 of 33

1.2 EMS31-US System Overview

Note: The following features are not yet available with the current product release: GPIO, I2C, Pulse Count-

er, PWM, FST_SHDN, SPI, ADC and 2nd SIM/MIM. Second SIM/MIM interface is hardware prepared

only.

Figure 1: EMS31-US system overview

GPIO

interface

I2C

ASC0

CONTROL

POWER

ANTENNA

(LTE band)

Module

SIM1 interface

(with SIM detection)

SIM1

Application

BATT+

V180

VCORE

Emergency reset

Serial modem

interface

I2C

Antenna

Status LED

FST_SHDN Fast shutdown

ADC ADC

COUNTER

PWM

GP(I)Os

SPI SPI

ASC1 Serial interface

SIM2 interface/MIM

(with SIM detection)

SIM2 /MIM

PWM

Pulse Counter

Cinterion®EMS31-US Hardware Interface Overview

2 Interface Characteristics

EMS31_US_HIO_v00.103 2017-11-27

Confidential / Preliminary

Page 9 of 33

2 Interface Characteristics

EMS31-US is equipped with an SMT application interface that connects to the external appli-

cation. The SMT application interface incorporates the various application interfaces as well as

the RF antenna interfaces.

2.1 Application Interface

2.1.1 Serial Interface ASC0

EMS31-US offers an 8-wire unbalanced, asynchronous modem interface ASC0 conforming to

ITU-T V.28 protocol DCE signaling. The electrical characteristics do not comply with ITU-T

V.28. The significant levels are 0V (for low data bit or active state) and 1.8V (for high data bit

or inactive state).

EMS31-US is designed for use as a DCE. Based on the conventions for DCE-DTE connections

it communicates with the customer application (DTE) using the following signals:

• Port TXD @ application sends data to the module’s TXD0 signal line

• Port RXD @ application receives data from the module’s RXD0 signal line

Figure 2: Serial interface ASC0

Features:

• Includes the data lines TXD0 and RXD0, the status lines RTS0 and CTS0 and, in addition,

the modem control lines DTR0, DSR0, DCD0 and RING0.

• Configured for 8 data bits, no parity and 1 stop bit.

• ASC0 can be operated at fixed bit rates from 1,200bps up to 3,686,400bps.

• Autobauding (supported by future firmware version)

• Supports RTS0/CTS0 hardware flow control. Communication is possible by using only RXD

and TXD lines, if RTS0 is pulled low.

Cinterion®EMS31-US Hardware Interface Overview

2.1 Application Interface

EMS31_US_HIO_v00.103 2017-11-27

Confidential / Preliminary

Page 10 of 33

2.1.2 Serial Interface ASC1

EMS31-US provides a 4-wire unbalanced, asynchronous modem interface ASC1 conforming

to ITU-T V.24 protocol DCE signaling. The electrical characteristics do not comply with ITU-T

V.28. The significant levels are 0V (for low data bit or active state) and 1.8V (for high data bit

or inactive state).

EMS31-US is designed for use as a DCE. Based on the conventions for DCE-DTE connections

it communicates with the customer application (DTE) using the following signals:

• Port TXD @ application sends data to module’s TXD1 signal line

• Port RXD @ application receives data from the module’s RXD1 signal line

Figure 3: Serial interface ASC1

Features

• Includes only the data lines TXD1 and RXD1 plus RTS1 and CTS1 for hardware hand-

shake.

• On ASC1 no RING line is available.

• Configured for 8 data bits, no parity and 1 or 2 stop bits.

• ASC1 can be operated at fixed bit rates from 1,200 bps to 3,686,400bps.

• Supports RTS1/CTS1 hardware flow control. Communication is possible by using only RXD

and TXD lines, if RTS1 is pulled low.

TXD1

RXD1

RTS1

CTS1

TXD

RXD

RTS

CTS

Module(DCE) Application (DCE)

Indice

Altri manuali Gemalto Unità di controllo

Gemalto

Gemalto Cinterion BGS2-W miniPCIe Manuale utente

Gemalto

Gemalto Cinterion ALAS5 Manuale utente

Gemalto

Gemalto SafeNet ProtectServer Manuale dell'operatore

Gemalto

Gemalto Cinterion ELS81-US Manuale utente

Gemalto

Gemalto Cinterion EMS31 Manuale utente

Gemalto

Gemalto Cinterion EMS31-V Guida all'installazione

Gemalto

Gemalto Cinterion EHS6 Istruzioni per l'installazione

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente