Genie GS-3384 Manuale utente

Operator's Manual

3384 CE

3390

4390

5390

with

Maintenance

Information

Original Instructions

Fifth Edition

First Printing

Part No. 1278050GT

Operator's Manual Fifth Edition • First Printing

GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT

Front Matter

Contents

Introduction ........................................................... 1

Symbol and Hazard Pictorials Definitions............. 5

General Safety ...................................................... 7

Personal Safety..................................................... 9

Work Area Safety................................................ 10

Legend ................................................................ 18

Controls............................................................... 19

Inspections.......................................................... 24

Operating Instructions......................................... 34

Transport and Lifting Instructions ....................... 40

Maintenance ....................................................... 43

Specifications...................................................... 46

Fifth Edition: First Printing, December 2016

Genie is a registered trademark of Terex South Dakota, Inc. in

the U.S.A. and many other countries. “GS” is a trademark of

Terex South Dakota, Inc.

Complies with EC Directive 2006/42/EC

See EC Declaration of Conformity

Fifth Edition • First Printing Operator's Manual

Introduction

Part No. 1278050GT GS-3384 • GS-3390 • GS-4390 • GS-5390 1

Introducti on

About this manual

Genie appreciates your choice of our machine for

your application. Our number one priority is user

safety, which is best achieved by our joint efforts.

This book is an operation and daily maintenance

manual for the user or operator of a Genie

machine.

This manual should be considered a permanent

part of your machine and should remain with the

machine at all times. If you have any questions,

contact Genie.

Product Identification

The machine serial number is located on the serial

label.

Serial number

stamped on chassis

Serial label location under

chassis cover

Intended Use

This machine is intended to be used only to lift

personnel, along with their tools and materials to

an aerial work site.

Bulletin Distribution and

Compliance

Safety of product users is of paramount

importance to Genie. Various bulletins are used by

Genie to communicate important safety and

product information to dealers and machine

owners.

The information contained in the bulletins is tied to

specific machines using the machine model and

serial number.

Distribution of bulletins is based on the most

current owner on record along with their

associated dealer, so it is important to register your

machine and keep your contact information up to

date.

To ensure safety of personnel and the reliable

continued operation of your machine, be sure to

comply with the action indicated in a respective

bulletin.

Operator's Manual Fifth Edition • First Printing

Introduction

2 GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT

Contacting the Manufacturer

At times it may be necessary to contact Genie.

When you do, be ready to supply the model

number and serial number of your machine, along

with your name and contact information. At

minimum, Genie should be contacted for:

Accident reporting

Questions regarding product applications and

safety

Standards and regulatory compliance information

Current owner updates, such as changes in

machine ownership or changes in your contact

information. See Transfer of Ownership, below.

Transfer of Machine Ownership

Taking a few minutes to update owner information

will ensure that you receive important safety,

maintenance and operating information that

applies to your machine.

Please register your machine by visiting us on the

web at www.genielift.com or by calling us toll free

at 1-800-536-1800.

Fifth Edition • First Printing Operator's Manual

Introduction

Part No. 1278050GT GS-3384 • GS-3390 • GS-4390 • GS-5390 3

Danger

Failure to obey the instructions and

safety rules in this manual will result

in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator’s

manual.

1 Avoid hazardous situations.

Know and understand the safety rules

before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the

manufacturer’s instructions and safety

rules—safety and operator’s manuals and

machine decals.

You read, understand and obey employer’s

safety rules and worksite regulations.

You read, understand and obey all applicable

governmental regulations.

You are properly trained to safely operate the

machine.

Safety Sign Maintenance

Replace any missing or damaged safety signs.

Keep operator safety in mind at all times. Use mild

soap and water to clean safety signs. Do not use

solvent-based cleaners because they may damage

the safety sign material.

Operator's Manual Fifth Edition • First Printing

Introduction

4 GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT

Hazard Classification

Decals on this machine use symbols, color coding

and signal words to identify the following:

Safety alert symbol—used to alert

you to potential personal injury

hazards. Obey all safety

messages that follow this symbol

to avoid possible injury or death.

Indicates a hazardous situation

which, if not avoided, will result in

death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in minor or moderate injury.

Indicates a property damage

message.

DANGER

WARNING

CAUTION

NOTICE

Fifth Edition • First Printing Operator's Manual

Symbol and Hazard Pictorials Definitions

Part No. 1278050GT GS-3384 • GS-3390 • GS-4390 • GS-5390 5

Symbol and Hazard P ictorials Definiti ons

Read the operator’s

manual

Read the service

manual

Crush hazard Crush hazard Collision hazard

Tip-over hazard Tip-over hazard Tip-over hazard Tip-over hazard Electrocution hazard

Electrocution hazard Explosion hazard Fire hazard Burn hazard Skin injection hazard

Engage safety arm Keep away from

moving parts

Keep clear of

outriggers and tires

Move machine to

level ground

Close chassis tray

Lower the platform Do not set up where it

cannot be leveled with

outriggers

Maintain required

clearance

Access by trained

and authorized

personnel only

Use a piece of

cardboard or paper to

search for leaks

Operator's Manual Fifth Edition • First Printing

Symbol and Hazard Pictorials Definitions

6 GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT

Chock the wheels Release brakes Tiedown Lanyard anchorage

points

No smoking

Wheel load Transport diagram Side force Wind speed Outrigger load

Voltage rating for

power to platform

Pressure rating for air

line to platform

Maximum capacity Crushing hazard

Hold rail while lowering

Fifth Edition • First Printing Operator's Manual

General Safety

Part No. 1278050GT GS-3384 • GS-3390 • GS-4390 • GS-5390 7

General Safety

82562

82476

82474

114251

97719

1263542

82487

114371114338

133537

82487 114371

114338

114337

133537

82474

1263542

82562

82476

114251

Operator's Manual Fifth Edition • First Printing

General Safety

8 GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT

82562

82474

82476

82487

82475

82475 82560

114337

82560

82562

82474

82487

82475

114337

82476

1278048

GS-3384/GS-3390 - 82971

82811

82871

*82872

*82874

GS-4390 - 82972

GS-5390 - 82974

Altri manuali per GS-3384

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Genie Sistema di sollevamento

Genie

Genie GTH-844 Manuale di installazione e funzionamento

Genie

Genie AWP-15S Manuale utente

Genie

Genie Z-60/34 Manuale utente

Genie

Genie GS-3384 Manuale utente

Genie

Genie GTH-2506 Stage A Manuale utente

Genie

Genie Z-80/60 Manuale utente

Genie

Genie S-45 XC Manuale di installazione e funzionamento

Genie

Genie Super Tower ST-20 Manuale utente

Genie

Genie GTH-2506 AU.3 Manuale utente

Genie

Genie Z-30/20N Manuale di installazione e funzionamento

Genie

Genie Z-45/25 Manuale utente

Genie

Genie Z-45/25 Manuale utente

Genie

Genie Superlift SL-5 Guida rapida

Genie

Genie SUPERLIFT Contractor SLC-6 Guida rapida

Genie

Genie GTH-1544 Manuale di installazione e funzionamento

Genie

Genie S-60 HC Manuale utente

Genie

Genie Z-45/25 Manuale utente

Genie

Genie Lift Guard GR-12 Guida all'installazione

Genie

Genie Z-34/22 Manuale utente

Genie

Genie 33547 Operators Manuale utente

Genie

Genie GS-2046 Manuale utente

Genie

Genie GS-3384 Manuale utente

Genie

Genie TZ-34/20 Manuale utente

Genie

Genie Z-45/25 Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente

Ricon

Ricon Mirage F9T Manuale utente