Genie S-40 TRAX Manuale utente

Operator's Manual

40 AUS

Australia

with

Maintenance

Information

Eighth Edition

First Printing

Part No. 1259838

Operator's Manual Eight Edition • First Printing

S-40 • S-45 Part No. 1259838

Front Matter

Important

Read, understand and obey these safety rules and

operating instructions before operating this

machine. Only trained and authorized personnel

shall be permitted to operate this machine. This

manual should be considered a permanent part of

your machine and should remain with the machine

at all times. If you have any questions, contact us.

Internet: www.genielift.com

E-mail: [email protected]

Contents

Introduction ........................................................... 1

Symbol and Hazard Pictorials Definitions............. 4

General Safety ...................................................... 6

Personal Safety..................................................... 9

Work Area Safety................................................ 10

Legend ................................................................ 19

Controls............................................................... 20

Inspections.......................................................... 26

Operating Instructions......................................... 36

Transport and Lifting Instructions ....................... 44

Maintenance ....................................................... 47

Specifications...................................................... 50

Eight Edition: First Printing, October 2014

Genie and "S" are registered trademark of Terex South Dakota,

Inc. in the U.S.A. and many other countries.

These machines comply with

AS1418.10

Eight Edition • First Printing Operator's Manual

Introduction

Part No. 1259838 S-40 • S-45 1

Introducti on

Owners, Users and Operators:

Thank you for choosing our machine for your

application. Our number one priority is user safety,

which is best achieved by our joint efforts. We feel

that you make a major contribution to safety if you,

as the equipment users and operators:

1 Comply with employer, job site and

governmental rules.

2 Read, understand and follow the instructions

in this and other manuals supplied with this

machine.

3 Use good safe work practices in a

commonsense way.

4 Only have trained/certified operators,

directed by informed and knowledgeable

supervision, running the machine.

Danger

Failure to obey the instructions and

safety rules in this manual will result

in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator’s

manual.

1 Avoid hazardous situations.

Know and understand the safety rules

before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the

manufacturer’s instructions and safety

rules—safety and operator’s manuals and

machine decals.

You read, understand and obey employer’s

safety rules and worksite regulations.

You read, understand and obey all applicable

governmental regulations.

You are properly trained to safely operate the

machine.

Operator's Manual Eight Edition • First Printing

Introduction

2 S-40 • S-45 Part No. 1259838

Hazard Classification

Decals on this machine use symbols, color coding

and signal words to identify the following:

Safety alert symbol—used to alert

you to potential personal injury

hazards. Obey all safety

messages that follow this symbol

to avoid possible injury or death.

Indicates a hazardous situation

which, if not avoided, will result in

death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in minor or moderate injury.

Indicates a property damage

message.

Intended Use

This machine is intended to be used only to lift

personnel, along with their tools and materials to

an aerial work site.

DANGER

WARNING

CAUTION

NOTICE

Eight Edition • First Printing Operator's Manual

Introduction

Part No. 1259838 S-40 • S-45 3

Safety Sign Maintenance

Replace any missing or damaged safety signs.

Keep operator safety in mind at all times. Use mild

soap and water to clean safety signs. Do not use

solvent-based cleaners because they may damage

the safety sign material.

Operator's Manual Eight Edition • First Printing

Symbol and Hazard Pictorials Definitions

4 S-40 • S-45 Part No. 1259838

Symbol and Hazard P ictorials Definiti ons

Crush hazard Explosion hazard Fire hazard Explosion hazard Electrocution

hazard

Fall hazard Crush hazard Tip-over hazard Tip-over hazard Tip-over hazard

Tip-over hazard Electrocution hazard Read the service

manual

Rated platform

capacity

Keep off this

surface.

Keep away from

moving parts

Maintain required

clearance

Keep away from path

of moving platform

Only trained

maintenance

personnel should

access compartments

Read the operator’s

manual

Eight Edition • First Printing Operator's Manual

Symbol and Hazard Pictorials Definitions

Part No. 1259838 S-40 • S-45 5

No smoking

No flame

Stop engine

Platform downhill:

1Retract boom.

2Lower boom.

Platform uphill:

1Lower boom.

2Retract boom.

Do not use ether or

other high energy

starting aids on

machines equipped

with glow plugs

Lanyard anchorage

points

Wheel load Voltage rating for

power to platform

Pressure rating for air

line to platform

Fire extinguisher Avoid contact

Tie-down instructions Tie-down instructions Weight of welder

reduces capacity

Wind speed

Operator's Manual Eight Edition • First Printing

General Safety

6 S-40 • S-45 Part No. 1259838

General Safety

Eight Edition • First Printing Operator's Manual

General Safety

Part No. 1259838 S-40 • S-45 7

Operator's Manual Eight Edition • First Printing

General Safety

8 S-40 • S-45 Part No. 1259838

Altri manuali per S-40 TRAX

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Genie Sistema di sollevamento

Genie

Genie S-65 Manuale utente

Genie

Genie S-40 TRAX Manuale utente

Genie

Genie GTH-4013 SX Manuale utente

Genie

Genie SX-180 Manuale di installazione e funzionamento

Genie

Genie GS-2668 DC Manuale utente

Genie

Genie Z-30/20N Manuale di installazione e funzionamento

Genie

Genie Lift Guard GRC-12 Manuale utente

Genie

Genie Load Lifter 5.5 Manuale utente

Genie

Genie DPL-25S Manuale utente

Genie

Genie Super Tower ST-20 Guida rapida

Genie

Genie Z-45/25 Manuale utente

Genie

Genie AWP Super Series Manuale utente

Genie

Genie GTH-5519 Manuale di installazione e funzionamento

Genie

Genie GS-1930 Manuale utente

Genie

Genie GS-2646AV Manuale di installazione e funzionamento

Genie

Genie S-60 HC Manuale utente

Genie

Genie GS-2632 Guida all'installazione

Genie

Genie GS-2668 RT Guida all'installazione

Genie

Genie GTH-1048 Manuale utente

Genie

Genie LCM16-IP Manuale utente

Genie

Genie Z-30/20N Manuale utente

Genie

Genie Z-60/34 Manuale utente

Genie

Genie GS-1930 Manuale utente

Genie

Genie Z-34/22 Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente

Ricon

Ricon Mirage F9T Manuale utente