Genie Z-45/25 Manuale utente

Operator’s Manual

Z-45 25

Fourth Edition

First Printing

Part No. 114339

Serial Number Range

after 00000

with

Maintenance

Information

IC Power

Z-45 25J

ANSI/CSA

North America

South America

Asia

AUS

Australia

800-610-4101 • ActionRental.com

Operator's Manual

Z-45/25•Z-45/25J PartNo.114339

Fourth Edition • First Printing

Important

Read,understandandobeythesesafetyrulesand

operating instructions before operating this machine.

Only trained and authorized personnel shall be

permitted to operate this machine. This manual

should be considered a permanent part of your

machine and should remain with the machine at all

times. If you have any questions, call Genie Industries.

Contents

Page

Introduction ................................................................ 1

SymbolandHazard Pictorial Definitions..................... 3

GeneralSafety........................................................... 5

PersonalSafety ........................................................ 11

Work Area Safety...................................................... 12

Legend ...................................................................... 19

Controls .................................................................... 20

Inspections ............................................................... 27

OperatingInstructions............................................... 40

Transportand LiftingInstructions .............................. 46

Maintenance ............................................................. 49

Specifications ........................................................... 53

Internet:www.genielift.com

E-mail:[email protected]

First Edition: Seventh Printing, May 2002

Second Edition: Second Printing, August 2004

Third Edition: Second Printing, October 2005

Fourth Edition: First Printing, March 2007

"Genie" and "Z" are registered trademarks of

Genie Industries in the U.S.A. and many other

countries.

These machines comply with

ANSI/SIA 92.5

CAN B.354.4

Printed on recycled paper

Printed in U.S.A.

800-610-4101 • ActionRental.com

Operator'sManualFourth Edition · First Printing

PartNo.114339 Z-45/25•Z-45/25J 1

Introduction

Danger

Failure to obey the instructions and

safety rules in this manual will

result in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe

machineoperationcontainedinthisoperator's

manual.

1 Avoidhazardoussituations.

Knowandunderstandthesafetyrulesbefore

going on to the next section.

2 Alwaysperformapre-operationinspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

Youread,understandandobeythe

manufacturer'sinstructions and safetyrules—

safetyandoperator'smanualsandmachine

decals.

Youread,understandandobeyemployer's

safety rules and worksite regulations.

Youread,understandandobeyallapplicable

governmentalregulations.

Youareproperlytrainedtosafelyoperate the

machine.

Owners, Users and Operators:

Genieappreciates your choice of our machinefor

yourapplication.Ournumberonepriorityis user

safety, which is best achieved by our joint efforts.

We feel that you make a major contribution to

safety if you, as the equipment users and

operators:

1 Comply with employer, job site and

governmentalrules.

2 Read, understand and follow the instructions

in this and other manuals supplied with this

machine.

3 Use goodsafe work practices ina

commonsenseway.

4 Onlyhavetrained/certifiedoperators,directed

byinformedandknowledgeablesupervision,

runningthemachine.

If there is anything in this manual that is not clear

orwhichyoubelieveshould be added, please

Internet:www.genielift.com

E-mail:[email protected]

800-610-4101 • ActionRental.com

Operator'sManual Fourth Edition · First Printing

2 Z-45/25•Z-45/25J PartNo.114339

Intended Use

This machine is intended to be used only to lift

personnel, along with their tools and materials to an

aerial work site.

Introduction

Safety Sign Maintenance

Replace any missing or damaged safety signs.

Keep operator safety in mind at all times. Use mild

soap and water to clean safety signs. Do not use

solvent-basedcleanersbecausetheymay damage

the safety sign material.

Hazard Classification

Genie uses symbols, color coding and signal words

to identify the following:

Safety alert symbol—used to alert

youtopotentialpersonalinjury

hazards. Obey all safety

messages that follow this symbol

to avoid possible injury or death.

Indicatesa hazardous situation

which, if not avoided, will result in

deathorseriousinjury.

Indicatesa hazardous situation

which, if not avoided, could result

in death or serious injury.

Indicatesa hazardous situation

which, if not avoided, could result

inminor ormoderateinjury.

Indicatesa hazardous situation

which, if not avoided, could result

inpropertydamage.

Red

Orange

Yellow

Blue

800-610-4101 • ActionRental.com

Operator'sManualFourth Edition · First Printing

PartNo.114339 Z-45/25•Z-45/25J 3

CrushHazard BurnHazard FireHazard ExplosionHazard Electrocution

Hazard

FallHazard CrushHazard Tip-overHazard

Symbol and Hazard Pictorials Definitions

Tip-overHazard Electrocution

Hazard

Maintainrequired

clearance.

Readthe

operator’s

manual.

Keep off this

surface. Keepawayfrom

movingparts. Keepawayfrom

path of moving

platform.

Onlytrained

maintenance

personnelshould

access

compartments.

Nosmoking.

Noflame.

Stopengine.

Do not use ether

orotherhigh

energystarting

aids on machines

equippedwith

glowplugs.

Platformuphill:

1 Lowerprimary

2 Lowersecondary

3 Retractprimary

Platformdownhill:

1 Retract primary

2 Lowersecondary

3 Lowerprimary

Recovery procedure if tilt alarm sounds

whileelevated.

800-610-4101 • ActionRental.com

Operator'sManual Fourth Edition · First Printing

4 Z-45/25•Z-45/25J PartNo.114339

Lanyard

attachmentpoint

Symbol and Hazard Pictorials Definitions

Wheelload Voltageratingfor

powertoplatform Pressureratingfor

air line to platform Replacetires with

tires of same

specification.

Tie-down

instructions Tie-down

instructions

800-610-4101 • ActionRental.com

Operator'sManualFourth Edition · First Printing

PartNo.114339 Z-45/25•Z-45/25J 5

Safety signs and

locations

General Safety

800-610-4101 • ActionRental.com

Operator'sManual Fourth Edition · First Printing

6 Z-45/25•Z-45/25J PartNo.114339

General Safety

Safety signs and locations

800-610-4101 • ActionRental.com

Operator'sManualFourth Edition · First Printing

PartNo.114339 Z-45/25•Z-45/25J 7

Safety signs and locations

General Safety

800-610-4101 • ActionRental.com

Operator'sManual Fourth Edition · First Printing

8 Z-45/25•Z-45/25J PartNo.114339

General Safety

Safety signs and locations

800-610-4101 • ActionRental.com

Altri manuali per Z-45/25

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Genie Sistema di sollevamento

Genie

Genie GTH-4013 SX Manuale utente

Genie

Genie Runabout GR-8 Manuale utente

Genie

Genie Load Lifter 5.5 Manuale utente

Genie

Genie GS-3384 Manuale utente

Genie

Genie Z-45/25 Manuale utente

Genie

Genie CE Series Manuale utente

Genie

Genie GC-1530 Manuale utente

Genie

Genie GTH-4013 EX Manuale utente

Genie

Genie GS-2046 Manuale utente

Genie

Genie 33547 Operators Manuale utente

Genie

Genie S-105 Manuale utente

Genie

Genie AWP Super Series 114002 Manuale utente

Genie

Genie S-80 Manuale utente

Genie

Genie Z-45/25 Manuale utente

Genie

Genie Z-45/25 Manuale utente

Genie

Genie GS-2646 AV Manuale utente

Genie

Genie Z-51/30J Guida all'installazione

Genie

Genie GR-20J Manuale utente

Genie

Genie S-120 Guida all'installazione

Genie

Genie AWP Super Series Manuale utente

Genie

Genie GTH-2506 AU.3 Manuale utente

Genie

Genie Z-45/25 Manuale utente

Genie

Genie Z-45 Manuale di installazione e funzionamento

Genie

Genie GS-2032 Guida all'installazione

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente

Ricon

Ricon Mirage F9T Manuale utente