Giada BQ612 Manuale utente
Statement
The copyright of this manual belongs to Shenzhen JIEHE Technology Development Co., Ltd.
(Giada, JIEHE’s global brand) and all rights are reserved. The company reserves the right to
change this manual at any time without notification. Specifications here are for reference only,
please take the real product as standard.
Without official authorization of Giada, other companies or individuals may not copy,
plagiarize, translate, or disseminate this manual for commercial purpose.
The information provided in this manual is accurate and reliable. The company does not take
any legal responsibility for the consequences of infringement use of this manual.
Safety Notice
• Read the user manual carefully before setting up the Giada product.
• Disconnect the power cord before installing the internal components
• Most electronic components are sensitive to static electrical charge, please wear a
wrist-grounding strap when installing the internal components.
• Do not disconnect the power cord when the system is running to avoid damage to the
sensitive components by instantaneous surge voltage.
Contact Information
Shenzhen JIEHE Technology Development Co., Ltd.
Website: www.giadatech.com
Phone: +86-755-3330 0336
Email: support@giadatech.com
Address: 1~2/F, Block A, Tsinghua Information Harbor, North Section, Shenzhen Hi-tech
Park, Nanshan District, Shenzhen, China
- 1 -
Table of Contents
1. Product Introduction ............................................................................................ - 3 -
2. Interface Description and Hardware Specifications ............................................. - 3 -
2.1 Interface Description ................................................................................... - 3 -
2.2 Hardware Specifications .............................................................................. - 4 -
3. Accessories Installation Steps .............................................................................. - 5 -
3.1 CPU Installation .......................................................................................... - 6 -
3.2 Memory Installation .....................................................................................- 7 -
3.3 WIFI (M.2) Installation ................................................................................- 8 -
3.4 SIM Card Installation .................................................................................. - 8 -
3.5 3G/4G Installation ....................................................................................... - 9 -
3.6 2.5” SATA HDD/SSD Installation ..............................................................- 10 -
3.7 SSD (M.2) Installation ............................................................................... - 11 -
4. BIOS Setup ........................................................................................................- 11 -
4.1 Main (Standard CMOS Setup) ................................................................... - 14 -
4.2 Advanced (Advanced BIOS Setup) ............................................................- 15 -
4.2.1 ACPI Setting ..................................................................................... - 16 -
4.2.2 CPU Configuration ........................................................................... - 16 -
4.2.3 Wake Configuration ..........................................................................- 18 -
- 2 -
4.2.4 Trusted Computing ........................................................................... - 19 -
4.2.5 IT8625 Super IO Configuration ........................................................ - 21 -
4.2.6 HM Monitor & Smart Fan .................................................................- 23 -
4.2.7 System Devices Configuration .......................................................... - 24 -
4.3 Security ..................................................................................................... - 26 -
4.4 Boot ........................................................................................................... - 27 -
4.5 Save & Exit ............................................................................................... - 28 -
5. JAHC Introduction ............................................................................................ - 29 -
5.1 How to set up Auto power on function .......................................................- 29 -
5.2 JAHC Software ..........................................................................................- 30 -
5.2.1 JAHC software functions .................................................................. - 30 -
5.2.2 JAHC software installation guide ......................................................- 31 -
5.2.3 Startup & shutdown time setup ......................................................... - 34 -
5.3 Watchdog API and Instruction ...................................................................- 36 -
- 3 -
1. Product Introduction
Based on Alder Lake platform, Giada BQ612 is a high-performance desktop model and supports
Intel LGA1700 Socket 12th/13th Gen. processors(TDP ≤65W), equipped with H610/B660 chipset;
maximum 64GB dual-channel SO-DIMM DDR4-3200MHz memory and rich I/O ports to serve
different desktop terminal application scenarios.
2. Interface Description and Hardware Specifications
2.1 Interface Description
Front I/O Port
Rear I/O Port
Left I/O Port
- 4 -
2.2 Hardware Specifications
BQ612
Processor
CPU
Intel®LGA1700 Socket 12th/13th Gen. processors (TDP≤65W)
BIOS
AMI Source Code
Chipset
H610/B660
Memory
Type
DDR4-3200MHz
Socket
SO-DIMM
Channel
2
Max Capacity
64 GB
Graphics
GPU
Intel®UHD Graphics 730/770
Graphic Engine
DirectX 12, OpenGL 4.5, OpenCL3.0
Interface
1 x HDMI (Max.4096 x 2160 @60Hz)
1 x VGA (Max.2048 x 1536 @60Hz)
Optional: DP (Max.7680 x 4320 @60 Hz) colay with VGA
Network
Controller
2 x Realtek RTL 8111H Gigabit Etherneta
Interface
2 x RJ45
I/O Interface
USB
1 x USB Type-C3.2 Gen1 (H610)
2 x USB3.2 Gen1, 6 x USB2.0 (H610)
1 x USB Type-C3.2 Gen2 (B660)
2 x USB3.2 Gen2, 6 x USB2.0 (B660)
Serial Port
2 x RS232
Audio
1 x MIC-IN, 1 x LINE-OUT
Wireless
1 x E-Key (2230) for Wi-Fi/BT
TPM
Optional: TPM2.0
Storage
Socket 1
1 x M-key M.2 (2242/2280) for PCIe SSD
Socket 2
1 x 2.5”SATAIII
JAHC
Watchdog Timer
0-255 Second Time Out Support
Auto Power On
Power Activated Automatically Start
RTC
Set up independently every day, a week as a cycle
Remote Control
NA
Operation System
Windows
Windows 10-1909 (64bit)/Windows 11 (64bit)
Linux
Linux Ubuntu (64bit)
Power
Power Type
DC-IN,19V / 3.42 A
- 5 -
Mechanical
Construction
Metal,Black
Dimension
(W x D x H)
200mm x 185mm x 35.5mm (7.87” x 7.28” x 1.40”)
Environment
Operating
Temperature
0-45℃( 32℉- 113℉) at 0.7m/s Air Flow
Relative
Humidity
95%@40℃(non-condensing)
Certification
CE, FCC Class B, UKCA
3. Accessories Installation Steps
For safety reasons, please ensure that the power cord is disconnected before opening the case.
How to open the cover
Unscrew the two screws. Push and open the case. (CPU, SO-DIMM#1, 1 x M.2 (2230) for WiFi/BT，
1 x 2.5”SATA (7+15Pin) are on top side).
Unscrew the three screws, and remove the cover. (SO-DIMM#2 and 1 x M.2 (2242/2280) for SSD
are on bottom side).
- 6 -
3.1 CPU Installation
1. Unscrew the 4 screws and remove the CPU cooler.
2. Remove the hook to open the closure.
3. Put the CPU on the board and paint the top side with heat conduction grease.
4. Remove the closure and put the hook back.
5. Tighten up the four screws.
- 7 -
3.2 Memory Installation
This product only supports DDR4 SO-DIMM memory modules.
1. On top side, unscrew the two screws and remove the fan. Locate the SO-DIMM slot on the board.
2. Gently insert the module into the slot in a 45-degree angle.
3. Carefully push down the memory module until it snaps into the locking mechanism.
- 8 -
3.3 WIFI (M.2) Installation
1.Plug the WIFI module into the appropriate slot.
2.Secure the module to the carrier by tightening up the screw.
3.Connect the two black cables to Main and AUX. Install antennas.
3.4 SIM Card Installation
This product supports standard SIM card with the size of 25mm × 15mm
1. [Open] the SIM card holder and pull it up.
2. Insert the SIM card.
3. [Lock] the card holder.
Indice
Altri manuali Giada Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
