Giada EN-J6412DL Manuale utente
Statement
The copyright of this manual belongs to Shenzhen JIEHE Technology Development Co., Ltd.
(Giada, JIEHE’s global brand) and all rights are reserved. The company reserves the right to change
this manual at any time without notification. Specifications here are for reference only, please take
the real product as standard.
Without official authorization of Giada, other companies or individuals may not copy, plagiarize,
translate or disseminate this manual for commercial purpose.
The information provided in this manual is accurate and reliable. The company does not take any
legal responsibility for the consequences of infringement use of this manual.
Safety Notice
• Read the user manual carefully before setting up the Giada product.
• Disconnect the power cord before installing the internal components
• Most electronic components are sensitive to static electrical charge, please wear a wrist-grounding
strap when installing the internal components.
• Don’t disconnect the power cord when the system is running to avoid damage to the sensitive
components by instantaneous surge voltage.
Contact Information
Shenzhen JIEHE Technology Development Co., Ltd.
Website: www.giadatech.com
Phone: +86-755-3330 0336
Email: support@giadatech.com
Address: 1~3/F, Block A, Tsinghua Information Harbor, North Section, Shenzhen Hi-tech
Park, Nanshan District, Shenzhen, China
- 3 -
Table of Contents
1. Product Introduction ..................................................................................... - 5 -
1.1 Brief Introduction ................................................................................ - 5 -
1.2 Motherboard Picture ............................................................................ - 5 -
1.3 Specification ........................................................................................ - 5 -
2. Hardware Usage Instruction ......................................................................... - 7 -
2.1 Dimension Chart .................................................................................. - 7 -
2.2 Interface Definition ............................................................................. - 8 -
2.2.1 Board Jumper, Header And Interface Diagram ......................... - 8 -
2.2.2 Board Jumper And Header Definition ....................................... - 9 -
3. Accessories Installation Steps .................................................................... - 14 -
3.1 WIFI/3G/4G (M.2) Installation ......................................................... - 14 -
3.2 M.2 Installation .................................................................................. - 16 -
3.3 SATA Installation ............................................................................... - 16 -
3.4 Memory Installation .......................................................................... - 17 -
3.5 SIM Card Installation ........................................................................ - 18 -
4. Bios Setup ................................................................................................... - 19 -
4.1 Main (Standard CMOS setting) ......................................................... - 22 -
4.2 Advanced (Advanced BIOS setup) ................................................... - 23 -
- 4 -
4.2.1 ACPI Setting ............................................................................ - 24 -
4.2.2 CPU Configuration .................................................................. - 25 -
4.2.3 Trusted Computing .................................................................. - 27 -
4.2.4 Hardware Monitor ................................................................... - 28 -
4.2.5 Serial Port 1 Configuration ...................................................... - 30 -
4.2.6 Serial Port 2 Configuration ...................................................... - 31 -
4.2.7 OEM ME Configuration .......................................................... - 32 -
4.2.8 System Devices Configuration ................................................ - 33 -
4.3 Security Configuration ...................................................................... - 35 -
4.4 Boot ................................................................................................... - 37 -
4.5 Save & Exit ........................................................................................ - 39 -
4.6 Watchdog API and instruction ........................................................... - 39 -
- 5 -
1. Product Introduction
1.1 Brief Introduction
Giada EN-J6412DL adopts Intel® Elkhart Lake platform Celeron® J6412 quad-core CPU with a main
frequency up to 2.60 GHz. With a size of only 3.5 inches, the life cycle of up to 7 years, and rich
interfaces, it is an excellent choice for Kiosk and digital signage.
1.2 Motherboard Picture
1.3 Specification
Processor
CPU Intel® Celeron J6412 processor
Frequency 2.00GHz (Up to 2.60GHz)
BIOS AMI Source Code
Chipset SOC
Memory Type 2×SO-DIMM DDR4-3200MHz up to 32GB
Graphics
GPU Intel® UHD Graphics for 10th Gen. CPU
Graphic Engine DirectX, OpenGL, OpenCL
Audio Controller Realtek ALC897 HD Audio
Network Controller 2×RTL8111H Gigabit Ethernet
Storage
SATA 1×2.5” SATA3
M.2 1×M-Key M.2(2280) for PCIe SSD
- 6 -
eMMC Onboard eMMC5.1 optional
External
I/O Interface
USB 3×USB 3.2 Gen2, 3×USB 2.0
Network 2×RJ45
Audio 1×2-in-1 headset (Audio-out&Mic-in)
Display Output
1×HDMI (Max.4096×2160@60Hz)
1×DP (Max.4096×2160@60Hz)
Internal
I/O Interface
LVDS 1×30pin LVDS (Colay with eDP header)
eDP 1×40pin eDP(Colay with LVDS header)
USB 2×USB2.0, signal by 1×9pin USB header
RS232 1×RS232, signal by 1×9pin COM header
RS232/422/485 1×RS232/422/485, signal by 1×9pin COM hearder
F_Panel/Speaker 1×8pin F_Panel, 1×4pin Speaker
CLR_CMOS 1×3pin Clear CMOS
GPIO 1×10pin GPIO
SYS_FAN 1×4pin system fan, 1×6pin Inverter
TPM2.0 1×TPM optional
WatchDog
Timer WatchDog Timer Yes
Auto Power On
Auto Power On Yes
RTC Remote Time control
Set up independently every day, a week as a cycle
PWR Power requirement DC-IN 12V – 24V
Operation
System Windows/Linux Windows10/11(64 bit) / Linux(64 bit)
Fan Fan Yes
PCB Dimensions(W×D) 146mm×102mm (5.75”×4.02”)
Environment
Operating Temperature
0°C ~ 60°C (32 ~ 140°F) at 0.7 m/s air flow
Relative Humidity 95% @60°C (non-condensing)
- 7 -
2. Hardware Usage Instruction
2.1 Dimension Chart
- 8 -
2.2 Interface Definition
2.2.1 Board Jumper, Header And Interface Diagram
- 9 -
2.2.2 Board Jumper And Header Definition
No. Name Function PIN Definition
1 F_COM1 COM Port
(RS232)
2 F_COM2
COM Port
（RS232/
422/485）
3 GPIO GPIO Port
4 SYS_FAN System
Fan
-
10
5 CLR_CMOS
Clear CMOS
Jumper
6 F_USB2_1 USB2.0
Header
7 SPK_6W Speaker
Port
Indice
Altri manuali Giada Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
