Gingerway GW-4323 Manuale utente
Descriptions
Dear users, sincerely thank you for choosing our products. For your convenience of installing and using
this product, please read this manual carefully before use.
Gingerway wireless alarm extension module is used to connect other companies' wired alarm sensor(
normally-open) to Z-Ginger network system. The battery standby time and reliability are observably
improved owe to the ultralow power consumption technology and two-way wireless communication
technology.
This product must be used with Gingerway SmartC series of gateways.
1. Indicator
2. Connecting wire of external
sensor
3. Bind Button
4. Internal Antenna
5. Tamper Switch
6. Antenna Outlet
Wireless Alarm Extension Module
Instruction Manual
GW-4323
Gingerway Technologies Co.,Ltd
Enjoy the life
Product Structure Diagram
Wiring
201704 V1.1
Main Features
√ Z-Ginger® full-digital, highly reliable, large coverage, low power consumption internet of things
two-way wireless network
√ Ultralow power consumption, battery life observably extended
√ Low battery notication
The alarm output of external sensor is required to be
dry contact, normally open type(normally disconnected,
only the alarm occurs is it connected).
Installation method of wireless alarm extension module:
After connecting the alarm extension with external
sensor, stick the alarm extension module on the desired
location with double faced adhesive tape or fasten them
with screws.
When the alarm extension module is mounted far
from the gateway, its internal antenna can be took out
to enhance its wireless communication intensity. The
detailed method as follows:
Remove the battery and take out the circuit board
carefully, draw the antenna out antenna outlet and
straighten it, then put the circuit board back on the
original position.
Power supply of external
sensor (Optional)
External Sensor
Alrm extention module
①
②
③
④
⑥
Outside
⑤
②
①
Inside
Power Supply 1.5VDC (one AA LR6 1.5V alkaline battery)
Current Standby current: ≤13μA
Alarm current: ≤30mA
Wireless Operating Frequency 433MHz
Wireless Transmit Power ～10dbm
Wireless Receiving Sensitivity ≤-105dbm
RF Coverage about 30m indoor, 100m barrier free
Operating Temperature -10℃～60℃
Relative Humidity ≤ 80% (Non-condensing)
Dimension (L*W*H) 71mm×35.5mm×19mm
Total Weight 40g (battery included)
Binding
Technical Parameters
Please bind this product with SmartC gateway before use:
Long press the bind button for 5 seconds, the indicator will continuously sticker and send out binding
request. Add a new smart device binding on APP "ZGinger Mini", you can refer to the instruction
manual of SmartC gateway for the detailed procedure .
Attention: The external sensor can be checked as "24-Hour Armed" while binding with SmartC
gateway, this sensor can't be disarmed after "24-Hour Armed" checked. If your external sensors are
gas sensor, smoke sensor or other sensors which should be alway in arm state, please check the "24-
Hour Armed".
Low battery notication: When the wireless alarm extension module in low battery, the low battery
signal will be sent to gateway. The siren of gateway wouldn't hoot while gateway receiving the signal,
only the notication will be sent to user.
Shenzhen Gingerway Technologies Co., Ltd.
Address: 3-Floor, Building A6, Xingye Industrial Park, Zhongshanyuan No.2 Road, Nanshan
District. Shenzhen, Guangdong, China.
Tel :0755 -28779595 Fax :0755 -28779405
Website: www.gingerway.com
Gingerway products are guaranteed for 2 years since the date of purchase. During the warranty
period, if Gingerway products malfunction(not contain artificial damages) under normal
circumstances, they can be free repaired or exchanged at local dealer with the purchase invoice.
1. If due to quality failure during the warranty period, the maintenance is free in rst year, only
the component cost will be charged in the second year.
2. Disassembling Gingerway product components without the permission of our company or the
local client center, our company will no longer bear the free warranty responsibility .
Note: Shenzhen Gingerway Technologies Co., Ltd reserves the right of nal explanation for above
terms.
0678
Warranty Terms
Indice
Altri manuali Gingerway Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
