GRAUPNER 34002 Manuale utente

No. 34002

No. 34003

2 channel HoTT 2,4 GHz receiver/servo/speed controller unit

Vector Unit / Vector Unit Extreme

Manual

3 / 20

34001_HB_V1

Introduction......................................................................... 4

Service Center .................................................................... 4

Intended Use....................................................................... 5

Package Content - Unit No.34002..................................... 5

Package Content - Unit No.34003..................................... 5

Technical Data .................................................................... 6

Symbols Explication ........................................................... 7

Safety Notes........................................................................ 7

Vector Unit Description ........................................................ 9

Preparation Before Use.................................................... 10

Connecting the Battery.................................................... 10

Charging the Battery ........................................................ 11

Installing the Motor Unit .................................................. 11

Connecting the Motor Unit .............................................. 12

Binding the Unit ................................................................ 12

Successful Binding Process ............................................. 13

Unsuccessful Binding Process ......................................... 13

Binding Multiple Units....................................................... 13

Installing and Upgrading Propellers ............................... 13

Free Mixers........................................................................ 16

Flying, Assembling and Experimenting with the Vector

Unit..................................................................................... 16

Ground Ideas ................................................................... 16

Installation ........................................................................ 17

Flying Tips........................................................................ 18

Declaration of Conformity ............................................... 18

Index

Introduction

Thank you very much for purchasing the Graupner Vector unit.

This manual is valid for unit Numbers 34002 and 34003. Package

content will change depending on the version.

Read through this entire manual before use. Graupner continu-

ously enhances and updates its products and reserves the right

to change its products, technology, user manuals and equip-

ment at any time without prior notice.

Periodically check our website, www.graupnerusa.com for

the most recent updates to the manual and firmware.

To maintain this condition and to ensure safe operation, you must

read and follow this user manual and the safety notes before using

the product!

NOTE

THIS MANUAL IS PART OF THE PRODUCT. IT CONTAINS IMPORTANT

INFORMATION CONCERNING OPERATION AND HANDLING. KEEP THESE

INSTRUCTIONS FOR FUTURE REFERENCE. PLEASE PASS ON TO FUTURE

OWNERS.

Service Center

Graupner USA – OPENHOBBY LLC

3941 Park Dr., Suite 20-571

El Dorado Hills, CA 95762

United States

Phone: (855) 572-4746 x2

Hours: Mon – Fri 9:00am – 4:00pm PST

Email: [email protected]

Online Support: www.graupnerusa.com

Forums: www.rcgroups.com/graupner-openhobby-874/

Graupner Online For service centers, downloads and product list, visit our web

site at www.graupnerusa.com.

5 / 20

34001_HB_V1

Intended use

This Vector unit is intended be used for the purpose specified by

the manufacturer for operation of remote control models without

passengers. Any other type of use is prohibited and may dam-

age the system and cause significant property damage and/or

personal injury. Improper use is not covered by this product’s

warranty.

Read through this entire manual before you attempt to install or

use the transmitter.

Graupner continuously enhances and updates its products and

reserves the right to change its products, technology, user man-

uals and equipment at any time without prior notice.

Target Group

This product is not a toy. It is not suitable for children under

14 years old. The operation of this product must be performed

by experienced modelers. If you do not have sufficient knowl-

edge about operating radio-controlled models, please contact

an experienced modeler or a model club.

Package Content No.34002

Vector Core GRS 331

No.78101.1 Power Pack 160 mAh Battery

No.S2025 Slim 150 Charger

34001.4 Vector Motor CW

34001.30 Vector Propeller 46 mm

Manual

Package Content No.34003

Vector Core GRS 331

No.78101.1 Power Pack 160 mAh Battery

No.S2025 Slim 150 Charger

34001.4 Vector Motor Extreme CW

34001.31 Vector Propeller 56 mm

Manual

6 / 20 34001_HB_V1

Technical Data

Frequency band 2.4 to 2.4835 GHz Motor unit single approx. 6.8 g

Modulation FHSS Motor unit double approx. 13.7 g

Temperature range 14° to 130°F (-10°C to 55°C) Current consumption max. 2A continuous current

Antenna Wire 30 mm Stall torque/3.7 V approx 5 Ncm

Operating voltage 3.0V to 4.2V Speed/3.7C approx. 0.06 sec./40°

Weight Vector Core approx. 6.6 g

7 / 20

34001_HB_V1

Symbols explication

Always observe the information indicated by this warning sign.

Particularly those which are additionally marked with the follow-

ing signal words:

WARNING indicates the potential for serious injury

CAUTION indicates possibility of lighter injuries.

This icon indicates information that may be helpful in diagnosing

or troubleshooting, especially when accompanied by the follow-

ing signal words:

Note indicates potential malfunctions.

Attention indicates potential damages to objects.

Safety notes

These safety instructions are intended to protect this product,

yourself and the safety of others. Please read this section very

carefully before using this product!

• Check all relevant laws and regulations before using this

remote control model. These laws and regulations must

be observed in for the safety of yourself and others and

may vary by state, region, or country.

• First-time users: carefully familiarize yourselves with this

model’s functions and commands. Always exercise cau-

tion and operate this model responsibly.

• To avoid risk of suffocation, keep packaging materials

away from babies and small children.

• Supervision by an experienced adult is required for chil-

dren, persons mentally or physically handicapped, nov-

ices, or anyone not capable of safely using this product.

• Special liability insurance policies are mandatory for all

device operations. If you already own a device, determine

if the respective model is covered by your insurance.

• Protect all equipment from dust, dirt, moisture, vibration

and excessive heat or cold. The models may only be

operated remotely in normal outside temperatures rang-

ing from 14° to 130°F (-10°C to 55°C).

8 / 20 34001_HB_V1

• To ensure safe operation, always perform a range test

and functional test on the ground before you use your

model!

• Maintain frequent updates of your HoTT components

with the latest firmware version.

• Always use matching, original Graupner plug-in connec-

tions of the same design and material.

• Make sure that all of the plug-in connections are tight.

When disconnecting the plug-in connections, do not pull

the cables.

• For additional questions or support, contact the Graupner

USA Service Center, or an experienced user.

WARNING

Safety notes during the use

Rotating propellers can cause injury. Never touch rotating propel-

lers. This can cause serious injury.

To make sure the connected motors cannot accidentally start

when programming the transmitter, turn the transmitter’s motor

off, or detach the propellers.

To avoid electrical shock, check the Vector unit regularly for dam-

ages to the housings and cables, especially after a model

crashes. Discontinue using any electronic components that

have become wet; short-circuiting and shock risk is still preva-

lent even after components have dried.

The propellers must be mounted securely; thrown parts can

cause serious injury.

Keep long hair, loose clothing such as scarves, loose shirts, etc.,

away from the propeller. Damage to the propellers may occur

and flying debris may cause serious injury.

9 / 20

34001_HB_V1

Vector Unit description

1 Vector Core, Servo DES 131 with integrated receiver and speed controller

2 Battery connection cable

3 Drive gear to install a motor unit or a servo lever

4 Motor connection socket max. 2A continuous current

5 Receiver antenna

6 Fixture arms

7+cable (red)

8-cable (black)

9 Motor mount fixing screw, flat-head screw 1.2 x 3 mm

10 Motor mount

11 Motor

12 Propeller

13 Motor connection plug

14 Drive gear joint

10 / 20 34001_HB_V1

Preparation Before Use

The Vector unit should only be powered by a 1S LiPo battery

PowerPack (No. 78101.1).

The input voltage of the drive battery is monitored during flight

through the HoTT transmitter telemetry function.

If the voltage drops under 3.2 V, the HoTT transmitter will emit a

warning alarm. Immediately discontinue use and charge or

change the drive battery!

Connecting the Battery

Turn on the Vector unit by connecting the drive battery to the

battery connection cable.

Only use the recommended 1S LiPo battery Power Pack (No.

78101.1).

The connectors are reverse polarity protected: note the small

chamfers on the sides of the plug. Never use force – the connec-

tors should engage easily.

Attention

If the connection system is forcibly connected in the wrong

direction, the battery connection cable plug will be irreparably

damaged.

Never connect a battery with voltage higher than 4.2 V DC to

the unit! The receiver and the servo will be irreparably damaged.

Never connect a battery to the unit's motor port! The receiver

and the servo will be irreparably damaged.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali GRAUPNER Unità di controllo

GRAUPNER

GRAUPNER HoTT 2.4 Manuale utente

GRAUPNER

GRAUPNER S8474 Manuale utente

GRAUPNER

GRAUPNER 3972 Manuale utente

GRAUPNER

GRAUPNER S1038 Manuale utente

GRAUPNER

GRAUPNER HOTT M-G2 Manuale utente

GRAUPNER

GRAUPNER 3975 Manuale utente

GRAUPNER

GRAUPNER S8351 Manuale utente

GRAUPNER

GRAUPNER 23108 Guida all'installazione

GRAUPNER

GRAUPNER S8446 Manuale utente

GRAUPNER

GRAUPNER Soundswitch 2 Manuale utente

GRAUPNER

GRAUPNER 3971 Manuale utente

GRAUPNER

GRAUPNER 33600 Manuale utente

GRAUPNER

GRAUPNER HoTT 2-4S EH Manuale utente

GRAUPNER

GRAUPNER SXM 3971 Manuale utente

GRAUPNER

GRAUPNER 2381 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente