Gymstick GT7.0 Manuale utente
GT7.0 TREADMILL
USER MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future
reference. The specications of this product may vary from this photo, subject to change without notice.
2GT4.0 TREADMILL
BEFORE YOU BEGIN
Thank you for choosing the Gymstick GT7.0 Treadmill. We take great pride in producing this quality
product and hope it will provide many hours of eective exercise to make you feel better, look
better and enjoy life to its fullest.
TABLE OF CONTENT
1. SAFETY INSTRUCTIONS ................................................................................................ 3
2. ASSEMBLY INSTRUCTION............................................................................................... 4
3. SETTING UP YOUR TREADMILL ..................................................................................... 10
4. IMPORTANT ELECTRICAL INFORMATION ..................................................................... 11
5. GETTING STARTED ......................................................................................................... 12
6. CONSOLE OPERATION INSTRUCTIONS ................................................................. 14
7. MAINTENANCE AND CARE .............................................................................................. 20
8. TROUBLESHOOTING ....................................................................................................... 23
9. EXPLODED DRAWING ..................................................................................................... 24
10. PARTS LIST ...................................................................................................................... 25
11. IMPLIED WARRANTY ...................................................................................................... 28
READ AND FOLLOW THE SAFETY INSTRUCTIONS. FAILURE TO FOLLOW THESE INSTRUCTIONS
CAN RESULT IN SERIOUS INJURY.
!
NOTIFICATION!
3GT4.0 TREADMILL
!
WARNING!
SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following safety instructions when using
this equipment: Read all instructions before using this equipment.
• Never leave the treadmill unattended. Unplug the unit from the power outlet when it is not in use.
• Do not allow children or those unfamiliar with its operation on or near the treadmill. Do not leave children or
persons with reduced physical or mental capabilities unsupervised around the treadmill.
• Please wear proper clothes and shoes when using this equipment; do not wear clothes that might catch
any part of the equipment.
• If you feel any chest pains, nausea, dizziness, or short of breath, you should stop exercising immediately
and consult your physician before continuing.
• Keep children and pets away from the equipment. This machine is designed for adults only.
• Only one person should be on the equipment while in use.
• Please make sure all parts are not damaged and xed well before use.
• Never operate the unit if it is damaged, if it is not working properly
• This equipment should be placed on a at surface when using. Using a mat or other covering material on
the ground is recommended. The minimum free space required for safe operation is 0,5 meter.
• Never block the air openings on the hood while operating the treadmill. Never drop or insert objects into
any opening.
• Use the treadmill only for its intended purpose as described in this manual.
• If the power cord of the machine is damaged, it must be replaced. Do not use the machine until the power
cord has been changed and properly attached.
• This equipment is for household use only. Do not use the equipment outdoors.
• This appliance is designed for use with ~220 - ~240 Volt rated voltage.
• The maximum weight capacity for this product is 130kgs.
BEFORE BEGINNING THIS OR ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN FIRST.
THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH
PRE-EXISTING HEALTH PROBLEMS.
4GT4.0 TREADMILL
ASSEMBLY INSTRUCTION
• Lift up and remove the box that surrounds the Treadmill.
• Check the following items are present. If any of the parts are missing, contact with the dealer.
Note: Each step number in assembly instructions tells you what you will be doing. Read and
understand all instructions thoroughly before assembling the treadmill.
!
WARNING!
USE CAUTION WHEN ASSEMBLING THIS TREADMILL. FAILURE MAY RESULT IN INJURY.
0;
0;
0;
0;
0;
MAIN BODY UPRIGHT POST (R/L) CONSOLE REAR COVER
CONSOLE UPRIGHT POST COVER (R/L) BASE FRAME COVER
MANUAL HARDWARE KIT LUBRICATION OIL
SAFETY KEY
PACKING LIST
5GT4.0 TREADMILL
ASSEMBLY INSTRUCTION
MAIN PARTS
MOTOR COVER CONSOLE MOTOR MOTOR BELT
RUNNING BELT RUNNING DECK SIDE RAIL INCLINE MOTOR
FRONT ROLLER REAR ROLLER REAR COVER
HARDWARE BAG
Allen C.K.S half thread screw (M8*60*20 x 4pcs) Allen C.K.S full thread screw (M8*15 x 8pcs)
Allen C.K.S full thread screw (M8*20 x 2pcs) Philips C.K.S. self-taping screw (ST4*12 x 2pcs)
Philips C.K.S. self-taping screw (ST4*16 x 4pcs) Allen C.K.S half thread screw (M8*30*20 x 2pcs)
T shaped wretch (S6 x 1PCS) Cross Wrench (1pcs)
6GT4.0 TREADMILL
ASSEMBLY INSTRUCTION
TREADMILL OVERVIEW
Safety key
Handle bar
Upright post
Console
Side rail
Rear cover
MotorCover
Runningbelt
Maximum load 130kg
Dimension (folded) 1402 x 925 x 1541mm
Dimension (unfolded) 1925 x 925 x 1470mm
Running surface 1530 x 550mm
Speed 0.5 - 20.0km/h
TECHNICAL INFORMATION
REMARK: We reserve the right to amed the product without prior notice.
7GT4.0 TREADMILL
ASSEMBLY INSTRUCTION
STEP 1
Take out the machine from box and put it on the at oor. (As shown),remove all PE bags and bags
wrapped on the machine.
STEP 2
Connect communication wire of the console with the right upright post. Insert the left and right
upright post on the base frame, and then x the each upright post with 2pcs M8*60*20 screw and
1pc M8*20 screw.
8GT4.0 TREADMILL
ASSEMBLY INSTRUCTION
STEP 3
Fold up the treadmill, (Note: Before xing the base frame cover, please ensure the screws for base
frame and upright post are xed completely.) Put the base frame covers in the left and right side of
upright post, then clip-on the covers together. Last, x the covers by 1pc ST4*12 screw.
STEP 4
Insert the console on the upright post. See above picture. (Note: Please connect the
communication cables in the right handlebar and upright post, avoid damaging the cable.) Use
2pcs M8*15 screw to x each upright post, and then use 1pc M8*30*20 screw to x the hole under
each handlebar. (Note: The screw M8*30*20 is for adjusting the handlebar, it can not be xed
tightly, or else the tube will be damaged.)
9GT4.0 TREADMILL
ASSEMBLY INSTRUCTION
STEP 5
Put the display on the console, and lock the two parts together with 4pcs M8*16 screw.
STEP 6
Place the rear cover on the rear of console, and x it with 4pcs M8*16 screw.
LAST STEP
Check all screws were xed rightly. Make sure the treadmill was assembled stably.
10GT4.0 TREADMILL
SETTING UP YOUR TREADMILL
To make exercise a desirable daily activity for you, the treadmill should be placed in a comfortable and con-
venient setting. This treadmill is designed to use minimal oor space and to go nicely in your home.
• Do not place the treadmill outdoors.
• Do not place the treadmill near water or in high moisture content environment.
• Make sure power cord is not in the path of heavy trac.
• If your room is carpeted, check the clearance to make sure there is enough space between the
carpet ber and the treadmill deck. If you are uncertain, it is best to place a mat beneath your
treadmill.
• Locate the treadmill at least 4 feet from walls or furniture.
• Allow a safety area of 2m X 1m behind the treadmill so that you can easily get on and o the
treadmill without getting trapped during an emergency.
Occasionally after extended use you will nd a ne black dust below your treadmill. This is normal wear and
DOES NOT mean there is anything wrong with your treadmill. This dust can be easily removed with a va-
cuum cleaner. If you wish to prevent this dust from getting on your oor or carpet, place a mat beneath your
treadmill.
USE DEDICATED CIRCUIT
The outlet selected should be a dedicated circuit. It is particularly important that No sensitive electrical
equipment, such as computer or TV, share the same circuit.
Make sure the running deck is level to the ground. If the deck is positioned on uneven surface, it would
cause premature damage to the electronic system. Read this manual before operating this treadmill.
!
CAUTION!
Indice
Altri manuali Gymstick Tapis roulant
Gymstick
Gymstick WalkingPad TM-WPAD Manuale utente
Gymstick
Gymstick PRO20.0 Manuale utente
Gymstick
Gymstick GT4.0 Manuale utente
Gymstick
Gymstick RUN 3.0 Manuale utente
Gymstick
Gymstick RUN 10.0 Manuale utente
Gymstick
Gymstick PRO20.0 Manuale utente
Gymstick
Gymstick GT1.0 Manuale utente
Gymstick
Gymstick TITANIUM RUN 2.0 Manuale utente
Gymstick
Gymstick GT3.0 Manuale utente
Gymstick
Gymstick PRO10.0 Manuale utente
