H3C WA2610i-GN Manuale utente

H3C WA2610i-GN Access Point

Installation Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Document version:

PW102-20130320

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, , IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of

Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

The H3C WA2610i-GN AP Installation Guide describes the hardware specifications, preparations

before installation, installation procedure, cabling and grounding, and login procedure of the

WA2610i-GN AP.

This preface includes:

•Audience

•Conventions

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the WA2610i-GN APs

Conventions

This section describes the conventions used in this documentation set.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Obtaining documentation

You can access the most up-to-date H3C product documentation on the World Wide Web

at http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents] – Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions] – Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download] – Provides the documentation released with the

software version.

Technical support

servi[email protected]

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

Product overview·························································································································································· 1

Preparing for installation ············································································································································· 3

Safety recommendations ··················································································································································3

Accessories provided with the AP ···································································································································3

Installing the AP···························································································································································· 4

Check before installation··················································································································································4

Determining the installation position·······························································································································5

Mounting the AP on a table ····································································································································5

Mounting the AP on a wall······································································································································6

Mounting the AP on a ceiling ·································································································································9

Connecting the power supply······································································································································· 10

Check before power-on ········································································································································ 11

Local power supply ··············································································································································· 11

PoE power supply·················································································································································· 12

Check after power-on············································································································································ 12

Connecting the AP to the network································································································································ 12

Checking the network connection for the fit AP ································································································· 12

Checking the network connection for the fat AP································································································ 13

Logging in to the fat AP ·············································································································································14

Logging in through the console port ···························································································································· 14

Setting up the configuration environment ··········································································································· 14

Setting terminal parameters·································································································································· 15

Logging in through the console port···················································································································· 17

Logging in through Telnet or web ································································································································ 17

Appendix LEDs and ports ··········································································································································18

LEDs ················································································································································································· 18

Ports ················································································································································································· 18

Index ···········································································································································································20

Product overview

The H3C WA2610i-GN Access Point has integrated antennas, and also supports external antennas. The

WA2610i-GN can serve as a fit AP to cooperate with wireless switches or access controllers to provide

wireless access for WLAN users. All configuration tasks are configured on the wireless switches or access

controllers. The WA2610i-GN can also operate as a fat AP to provide wireless access for WLAN users.

Figure 1 Deployment of the AP on hotspots (fit AP)

Figure 2 Deployment of the AP on hotspots (fat AP)

Core equipment room

RADIUS

server

Wireless

NMS

Switch

Auditorium

Restaurant or

tea house

Hall or

information desk

Parking lot

WA2610i-GN

Core equipment room

RADIUS

server

Wireless

NMS

Switch

Auditorium

Restaurant or

tea house

Hall or

information desk

Parking lot

WA2610i-GN

Table 1 Basic configuration

Dimensions (H ×

W × D) Wei

Max.

ower

Enclosure

Protocol Power su

160 × 160 × 50 mm (6.30

× 6.30 × 1.97 in)

328 g

(11.57

oz)

12.95 W Plastic 802.11b/g/

Local power

supply + 802.3af

Preparing for installation

Safety recommendations

ARNING!

Only qualified personnel can install and remove a WA2610i-GN and its accessories. You must read all

safety instructions supplied with the access points before installation and operation.

To avoid possible bodily injury and equipment damage, read the following safety recommendations

before you install a WA2610i-GN. Note that the recommendations do not cover every possible

hazardous condition.

•Take adequate safety measures to avoid bodily injury and access point damage.

•Make sure that the ground is dry and flat and anti-slip measures are in place.

•Keep the chassis clean and dust-free.

•Do not place the access point in a moist area and avoid liquid surrounding the access point.

•Keep the chassis and installation tools away from walkways.

Accessories provided with the AP

The following accessories are provided with the AP:

MAC address label Wall anchor kit Console cable (provided with the

fat AP only)

T-rail holder mounting screw Hex-head bolt, washer, and nut

Wall-mounting bracket

Rubber feet

NOTE:

ntennas, power adapter, and power cable are user-supplied.

Installing the AP

CAUTION:

The WA2610i-GN is usually installed on a high position, such as a wall or ceiling, so the maintenance

personnel cannot log in from the console port to maintain and debug the AP. H3C recommends that you

in to the AP throu

h the console port to perform remote lo

in (Telnet or web lo

in) confi

uration, or

information about logging in to the AP, see “Logging in to the fat AP.”

Figure 3 Installation flowchart

Check before installation

Before you install an AP, check the following:

•Connect the power cord and connect the AP to the network. Check the LED status to make sure that

the AP can operate properly. For more information about AP LEDs, see “Appendix LEDs and ports.”

•Check that cabling has been completed.

Start

Determine the installation position Mount the AP to a wall

End

Check before

installation

Install the wall-

mounting bracket

Ceiling mounting

Install the AP

Connect the power

supply

Mount the AP on a table

Connect the AP to

the network

Mount the wall-

mounting bracket to

the ceiling

•The WA2610i-GN supports 802.3af-compliant PoE. To achieve the best performance, H3C

recommends that you adopt GE connection to the power device.

•Record the MAC address and serial number of the AP (marked on the rear of the AP) for future use.

Determining the installation position

Determine the installation position by observing the following principles:

•Leave as few obstacles (such as wall) as possible between APs and clients.

•Install APs away from electronic devices (such as microwave ovens) that may generate radio

frequency (RF) noise.

•Install APs in a place where they will not hinder people’s daily work and life.

•Do not install APs in a place where water seeping, water soaking, and condensing occur. Prevent

water or moisture from entering the APs.

CAUTION:

If part of the power line is routed outdoors, use a power strip with lightning protection (user supplied) to

connect the power cord of the AP to the power line to protect the AP from being damaged by lightning

strikes.

Installing the AP

NOTE:

The WA2610i-GN has integrated antennas. When you install the AP, determine whether external

antennas (user-supplied) are needed. Installing external antennas is not covered in this document.

Mounting the AP on a table

ARNING!

Do not place the WA2610i-GN on any metal surface. Place it on a place where there are no obstacles

and good signal strength is available.

1. To mount the AP on a table, attach the rubber feet supplied with the AP to the rear of the AP.

Figure 4 Attach the rubber feet

Indice

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente