Han-Bot DRT II Manuale utente

DRT ⅡUser Manual
1
Contents
DRTⅡUser Manual..........................................................................................2
1、Connecting Power and Computers.................................................2
1)、Connecting Power............................................................................2
2、Connecting Computers...................................................................3
2、Install drivers.................................................................................................4
3、Pre-configurate the software and test............................................6
1)、Connect the software.....................................................................6
2)、Test.............................................................................................................9
4、Print Models.................................................................................................11
1)、Machine Adjustment....................................................................11
2)、Generate STL file to GCODE................................................13
3)、Printing..................................................................................................19
4)、Off-line Printing..............................................................................19
5、LCD control Systems.............................................................................20
1)、First Page(Inform Screen)........................................................20
2)、Main Page............................................................................................21
3)、Part Page——“Prepare” item.................................................21
4)、Part Page——“Control” Item ................................................22
5)、Part Page——“SD card operation” Item........................23
Websites..................................................................................................................26

DRT ⅡUser Manual
2
DRTⅡUser Manual
1、Connecting Power and Computers
1)、Connecting Power
Connecting one point of the cable to 3D printer, the other point to the outlet

DRT ⅡUser Manual
3
Press ON/OFF button, turn on the machine,
2)、Connecting Computers
Connecting the machine and the computer with the USB wire,

DRT ⅡUser Manual
4
2、Install drivers
Please copy the files in the SD cards to the
computer for back-ups. Then could delete the
files, SD card would speciallized for off-line
printing.
After successful connecting, computer will let
us install the new hardware, cancel please.
If your computer system is XP, please follows the below steps:
STEP1- please install the DOTNETFX35 first, shut off the internet, the speed could
be faster.
(PS: Win 7 or aboved version has that software)
STEP2- Find the automatically-installment program, double click to
install the driver according to the wizard
PS: If the automatically-installment program don’t work under Win 7 or above
version, please install the driver manually! The methods are all the same.
Check whether the driver is installed successfully.
Take the USB out of the computer, and put it in again, the system will let install
the new hardware again,
A: If you install the driver automatically, click next, system will install
automatically, click OK at last.

DRT ⅡUser Manual
5
B: If you do it manually, choose” Install from the list or specific location”,
then choose the catalogue of the driver, click install at last. (The same method
as common driver manual installment).
Right click “My Computer”, choose “Management”, click “Device
Management”, and refer to below pictures”
Find “Port”, you install the
driver successfully. Please
kindly keep your PORT number
(Every computer might have
different port number).

DRT ⅡUser Manual
6
3、Pre-configurate the software and test
In the SD card, there are not only our company’s own software, we also
supply the CURA.
1)、Connect the software
Double click , Our printing system will
come out.:
Click ,

DRT ⅡUser Manual
7
find ,
Click it, you will see the window below,
Setting the CONNECTING first, still remember your port? Use yours. Suggested
that set other parameter as the picture below, especially the Baud Rate must be
115200.
Setting the PRINTER, Attention please, the temperature is important, ABS, please
set 230°C and 110°C, if you print PLA, please set 185°C and 55°C to 80°C,(We use

DRT ⅡUser Manual
8
ABS for this manual, so our temperature is 230 and 110°C.)
Setting the PRINTER CONFIGURATION. Our DRT build size is
200*200*200MM, so change the number to 200 in the market form, the other could be
the same as below picture,
Then, click
PS: In the “Repetier General Settings”, the workdirectory must be English,
otherwise the GCODE cannot be generated. Refer to below picture

DRT ⅡUser Manual
9
2)、Test
click , If connecting successfully, the software will show
Test the Moving control and the end-stop
Click “Homing” button ,After that, move the X/Y/Z axis to check the
movement.
- X homing, Y/Z is the same.After click, the axis will home.
- After click, the 3 axis will home at the same time.

DRT ⅡUser Manual
10
PS: If the machine is not homed, it could only move in Unilateral area; if you are
not familiar with the machine, the move distance could not too far.
Check the temperature-test and heat system (Extrusion and heat bed )
If not heated, the number of temperature will be the same as ambient.
Click and , the temperature
will rise up. When the extruder temperature rise to 230(If PLA, the temperature could
be 190), click , check whether the filament is extruded
fluently. Refer to the below picture:
Check the fan
Adjust the fan output to 100%, then click , check whether the fan
works well.
PS:When heat the bed, shut off the fan.
Indice
Altri manuali Han-Bot Stampante 3D


















