Hankscraft Runxin RevV4 Manuale utente

Innovative Solutions for Your Water

Hankscraft Runxin, LLC

300 Wengel Drive

Reedsburg, WI 53959

608.524.9465

[email protected]

hrh2o.co

RevV4 Valves & Systems

Service Manual

RevV4 Valves & Systems Service Manual

Hankscraft Runxin, LLC 300 Wen el Drive 608.524.9465 hrh2o.com sal[email protected]

Table of Contents

1. Introduction ................................................................................................................................................ 4

2. Product Features and Applications ............................................................................................................ 5-6

3. Product Dimensions and Specifications ...................................................................................................... 7-8

4. Pre-Installation Checklist ......................................................................................................................... 9-10

5. Valve Installation ................................................................................................................................... 11-14

a. Control Valve Installation .................................................................................................................. 11-12

b. Syste Sizing Chart ................................................................................................................................ 13

c. Control Valve Configuration ................................................................................................................... 14

6. Ceramic Bypasses ................................................................................................................................... 14-15

7. Pro rammin ......................................................................................................................................... 16-24

a. Display and Instructions .................................................................................................................... 16-17

b. Progra ing Modes A-01 to A-07 ................................................................................................... 18-24

8. PCB Functions and Connections .............................................................................................................. 25-32

a. Overview .............................................................................................................................................. 25

b. Signal Output........................................................................................................................................ 26

c. Signal Output Connector ................................................................................................................. 27-29

d. Interlock ............................................................................................................................................... 30

e. Alternating Interlock ............................................................................................................................ 30

f. Re ote Handling Connector ................................................................................................................ 31

g. Interlock Options .................................................................................................................................. 31

h. Using One Flow Meter with Interlock .................................................................................................. 32

RevV4 Valves & Systems Service Manual

Hankscraft Runxin, LLC 300 Wen el Drive 608.524.9465 hrh2o.com sal[email protected]

9. System Installation ............................................................................................................................... 32-44

a. Plu bing Connections ......................................................................................................................... 32

b. Drain Line Installation .......................................................................................................................... 32

c. Brine Line and Brine Tank Installation ............................................................................................. 33-36

d. Syste Installation Chart ..................................................................................................................... 37

e. Syste Start-Up............................................................................................................................... 38-39

f. Sanitization Procedure ......................................................................................................................... 40

g. Water Flow Diagra s ...................................................................................................................... 41-44

10. Assembly Drawin s and Parts List ........................................................................................................... 45-46

a. Valve Exploded View ............................................................................................................................ 45

b. Valve Parts List ...................................................................................................................................... 46

11. Troubleshootin ..................................................................................................................................... 47-49

a. Control Valve ................................................................................................................................... 47-48

b. Electronics ............................................................................................................................................ 49

12. Replacement Parts ..................................................................................................................................... 50

13. Accessories ................................................................................................................................................ 51

14. Packin List ............................................................................................................................................ 52-53

a. Valve ..................................................................................................................................................... 52

b. Syste .................................................................................................................................................. 53

15. Warranty ............................................................................................................................................... 53-54

16. System Confi uration and Settin s ............................................................................................................. 55

17. Factory Default Settin s ............................................................................................................................. 56

18. Contact Information ................................................................................................................................... 57

RevV4 Valves & Systems Service Manual

Hankscraft Runxin, LLC 300 Wen el Drive 608.524.9465 hrh2o.com sal[email protected]

1. Introduction

Thank you for choosing a Hankscraft Runxin RevV4 Ceramic Rotary Valve. RevV4 valves are designed with high

flow rates to handle any residential or light co ercial application. They feature innovative, patented cera ic

discs for ulti ate perfor ance and reliability. The discs are abrasion and corrosion resistant, extending the life

of the valve and significantly reducing aintenance costs.

RevV4 valves have 7 advanced progra ing options with fully adjustable cycles to ini ize water usage

during regeneration. They utilize up-flow regeneration which efficiently washes the edia, exchanging ore

grains per pound of salt. RevV4 valves have signal output for external devices, progra functions that re ain

in long ter e ory, and 72-hour e ory backup should a power outage occur, giving you the confidence

that your custo ers are receiving a cost-effective, high-quality water treat ent solution.

Hankscraft Runxin’s RevV4 valves have an interlock function to connect ultiple valves in series or in parallel.

There is an alternate interlock function, used with twin de and syste s and 3-way ball valves to supply

treated water 24/7. The RevV4’s si ple, yet powerful user interface has an easy to read LCD display and the

valve offers re ote handling to accept input fro a PLC or co puter. Advanced work odes are available with

adjustable settings and three different cycle sequences to get the exact configuration needed for any job.

RevV4 Valves Feature:

• Patented cera ic discs for longer life and reduced aintenance

• Highly configurable with easy to use progra interface

• Long-ter e ory for progra functions

• 72-hour e ory backup

• 4 language options: English, Spanish, Chinese, French

RevV4 Valves & Systems Service Manual

Hankscraft Runxin, LLC 300 Wen el Drive 608.524.9465 hrh2o.com sal[email protected]

2. Product Features and Applications

Primary Applications

Reco ended for co ercial and residential softening or de ineralization water treat ent syste s

•Softening Syste

•Iron Re oval Syste

•Ion Exchange Equip ent

•Boiler Softening Water Treat ent

•RO Pre-treat ent

Product Characteristics

Mechanical Components

The RevV4 uses internal cera ic discs which are corrosion and abrasion resistant to for a her etic seal. Rotation of the

upper disc aligns to the corresponding lower disc ports for Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast

Rinse odes.

Hard Water/No Hard Water Bypass

Up-flow regeneration with no hard water and hard water bypass options. This valve operates as a hard water bypass.

Excellent Flow Rate: 20 gp @ 15 psi drop.

365-Day Usa e Memory

Manual / Delayed Re eneration

Pressing at any ti e results in an i ediate anual regeneration.

Pressing and holding for 3 seconds, when syste is locked, results in a delayed regeneration at the preselected ti e.

Extended Power Outa e Indicator

If outage exceeds 3 days, the ti e of day indicator “



” will flash 12:12. The current ti e of day needs to be re-set. All

other set para eters re ain stored in e ory. The valve will resu e to operate fro the point of the power outage.

Three Re eneration Sequences

Lockout Function

Keypad will lock after 5 inutes without use. To access the para eter changes press and hold and

si ultaneously for 3 seconds to unlock.

RevV4 Valves & Systems Service Manual

Hankscraft Runxin, LLC 300 Wen el Drive 608.524.9465 hrh2o.com sal[email protected]

LCD Display Screen

Advanced Valve and External Device Connections

•Interlock and Alternate Interlock

•Re ote Handling

•Solenoid Valve

7 Re eneration Mode Options with Adjustable Cycle Times

Maximum Day Re eneration Interval

When the valve reaches the axi u progra ed service days, without reaching the set service capacity, it will trigger

a regeneration at the pre-progra ed ti e of day. Regeneration(s) reset both the axi u day regeneration value and

the service capacity value.

One Button to Chan e the Current Time

Pressing and holding the button for 3 seconds, when syste is locked, allows the current ti e of day to be adjusted.

Service Alarm

When the service alar feature counts-down and reaches set point, (Selectable 30 day in to 900 day ax in 30 day

incre ents) the alar will activate at 8p . The alar will sound for 2 inutes and then shut off auto atically. To silence

alar within the 2 inute period, press any button. A service call essage will then appear on the screen as a signal for

the ho eowner to contact a water treat ent professional for routine service. To eli inate this essage fro the screen,

unlock the valve progra ing by pressing the UP and DOWN arrows si ultaneously until the padlock in the upper left

corner of the screen disappears (approxi ately 3 seconds). Next, enter the progra ing enu by pressing the

MENU/CONFIRM button once and then pressing the BACK/REGENERATION button once. The syste will then go back to

nor al status and the operational days will re-start new count-down. Note: The syste will operate nor ally when it is

displaying the service alar essage.

RevV4 Valves & Systems Service Manual

Hankscraft Runxin, LLC 300 Wen el Drive 608.524.9465 hrh2o.com sal[email protected]

3. Product Dimensions and Specifications

Len th (max.) Width (max.) Hei ht (max.) Re eneration Mode

8.3" 8.75" 7.5" Up-flow

These valve dimensions are for reference only.

Connect Port Dimensions

Product Model Inlet Port Outlet Port Drain Port Brine Port Base Riser Pipe

Hard Water Bypass

72605-HK 1" NPT 1" NPT 3/4" NPT 3/8" 2.5" 8NPSM 32 No

72605B-HK 1" NPT 1" NPT 3/4" NPT 3/8" 2.5" 8NPSM 32 Yes

Main Technical Parameters

Water Capacity

See Perfor ance Data Sheet

Power Input 100-240VAC / 50-60Hz

Power Output 12VDC / 2A

Regeneration

Cycles

Sequence 1: Service → Backwash → Brine & Slow Rinse → Fast Rinse → Brine Refill

Sequence 2: Service → Backwash → Brine & Slow Rinse → Backwash → Fast Rinse → Brine Refill

Sequence 3: Service → Brine Refill → Service (180 in-ti e fixed) → Backwash → Brine & Slow Rinse →

Backwash → Fast Rinse

RevV4 Valves & Systems Service Manual

Hankscraft Runxin, LLC 300 Wen el Drive 608.524.9465 hrh2o.com sal[email protected]

Regeneration

Mode

A-01 Meter Delay: Regeneration happens when the capacity reaches zero and the preset ti e of

regeneration is reached.

A-02 Meter I ediate: Regeneration happens when the capacity reaches zero.

A-03 Intelligent Meter Delay: The sa e delay function as A-01 but the capacity is deter ined by entering

the total Resin Capacity, Feed Water Hardness, and the Nu ber of People in the household. The control

valve auto atically calculates the gallons for regeneration.

A-04 Intelligent Meter I ediate: The sa e function as A-02 but the capacity is deter ined by entering

the Total Resin Capacity and Feed Water Hardness. The control valve auto atically calculates the gallons

for regeneration.

A-05 Re aining Co pare: Co pares current usage with previous 365 day daily usage to intelligently

deter ine when regeneration will occur. Regeneration starts at the set regeneration ti e.

A-06 By Day (ti er): Service days count down to zero (0) and regeneration starts at the set regeneration

ti e.

A-07 Filter Meter: Filter ode, regeneration occurs when the capacity reaches zero and the preset ti e

for regeneration is reached.

RevV4 Valves & Systems Service Manual

Hankscraft Runxin, LLC 300 Wen el Drive 608.524.9465 hrh2o.com sal[email protected]

4. Pre-Installation Checklist

IMPORTANT NOTICE

Read through the instructions thoroughly and obtain all aterials and tools before proceeding with the

installation. Be sure to follow all applicable national, state, county and local plu bing codes and regulations.

All plu bing and electrical work should be perfor ed by an accredited professional to ensure all local, state,

and unicipal guidelines are et.

During cold weather it is reco ended that the installer war the valve to roo te perature before

operating.

Required Operatin Conditions

Workin Conditions

Working Pressure 20psi

～

120psi

Water Te perature 35 °F

～

125 °F

Workin Environment

Environ ent Te perature 35 °F

～

125 °F

Relative Hu idity ≤95%

Power Source 100-240VAC / 50-60Hz

Inlet Water Quality

Turbidity

＜

2FTU

Hardness 20 grains per gallon

Chlorine

＜

0.1pp

Iron

＜

0.3pp

CAUTION

Do not exceed 120 psi water pressure.

Do not exceed 35° C / 125° F water te perature.

Do not subject unit to freezing conditions.

Failure to use this product within the described conditions ay void the warranty.

RevV4 Valves & Systems Service Manual

Hankscraft Runxin, LLC 300 Wen el Drive 608.524.9465 hrh2o.com sal[email protected]

•Do not use the syste with water that is icrobiologically unsafe or of unknown quality without

adequate disinfection before or after the syste .

•Do not use the brine tube, injector body, or other connectors on the RevV4 valve as a handle to carry

the syste .

•Ensure there is salt in the brine tank at all ti es when this valve is used for softening. The brine tank

should contain clean water softening salt only, at least 99.5% pure. Do not use s all grain salt.

•When there is oderate to high turbidity, a filter should be installed before the water softening syste

on the inlet side.

•If the water pressure exceeds 120psi, a pressure reducing valve ust be installed before the water inlet. If

the water pressure exceeds 80 psi, installing a pressure reducing valve before the water inlet is highly

reco ended. If the water pressure is under 20 psi, a booster pu p ust be installed before the

water inlet.

•Replace ent parts for the RevV4 valve should only be purchased through Hankscraft Runxin resellers.

Electrical co ponents, such as transfor ers, are specific to the RevV4 valve fro Hankscraft.

•Regular interval onitoring of the water quality and work environ ent is reco ended to ensure

proper operation of the valve and syste .

•Any odification to Hankscraft equip ent, which is outside the standard scope of supply, voids the

product warranty.

•Hankscraft equip ent, like all odern electronic devices, can be da aged by electrical surges or brown

outs. Every effort has been taken to harden the circuits, by design, to protect against such events. These

precautions, or even additional surge protection, are not 100% effective. Therefore, equip ent da age

caused by abnor al electrical events is not covered by warranty.

Indice

Altri manuali Hankscraft Runxin Unità di controllo

Hankscraft Runxin

Hankscraft Runxin HS Series Manuale utente

Hankscraft Runxin

Hankscraft Runxin HD Series Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente