Hantek HT2018B Manuale utente

HT2018B/C Battery System Tester

Manual V1.2

HT2018B(C) Battery System Tester I 
 
Content 
Brief Introduction...................................................................................................... 1 
Safety Requirements................................................................................................ 1 
International electrical symbols................................................................................ 2 
Product icons and instructions................................................................................. 2 
Functions.................................................................................................................. 4 
1 Battery voltage type....................................................................................... 4 
2 Battery Test.................................................................................................... 4 
3 Startup Load Test .......................................................................................... 8 
4 Maximum Load Test ...................................................................................... 9 
5 Charging System Test ................................................................................. 11 
6 Print Test Report.......................................................................................... 12 
7 Language..................................................................................................... 13 
The common problems .......................................................................................... 14 
Specifications......................................................................................................... 16 
Battery Specification Table .................................................................................... 17 
1 JIS code conversion table............................................................................ 17 
2 DIN/EN model comparison table.................................................................. 18 

HT2018B(C) Battery System Tester 1

1 Brief Introduction

HT2018B/C Series Battery System Tester is a performance testing tool for startup lead-

acid batteries. It is a testing tool for measuring the startup process, charging process and

battery performance during electric load process. HT2018C has the Bluetooth printing

function for startup process test report.

This product can be used for battery production and sales, auto parts maintenance and

various equipment systems related to the use of lead-acid batteries on the performance

of lead-acid batteries testing tools.

Features:

◆The instrument is excellent in design, easy to operate, accurate in reading and

complete in functions.

◆The instrument adopts large screen dot matrix liquid crystal display.

◆The internal use of accurate circuits and powerful digital processing unit, using four-

wire Kelvin test connection method to complete a series of complex data acquisition

and operation, and obtain each test data.

◆The instrument strengthens the protection of input signal line against mistake and

input characteristic, so as to prevent polarity reversal, prevent high voltage

connection and bad contact of test clamp head, in order to use in the process of

safer and more convenient.

2 Safety Requirements

This manual includes the use of instrument instructions and safety operation warnings

and how to maintain them. Using instruments without manuals may damage the

instrument. This instrument is designed and manufactured strictly according to the safety

requirements of GB4793.1 electronic measuring instrument and IEC/EN61010-1 safety

standard. It meets the double insulation overvoltage standard CAT III 600V and pollution

level 2 safety standard design.

1) HT2018B/C is suitable for detecting 6V, 12V and 24V batteries;

2) The working voltage range of HT2018B/C is DC 4.5V ~30V;

3) Battery voltage will be slightly higher than the normal value at just full state, please

turn on the headlamp for 2-3 minutes, and when the voltage drops back to the normal

value, now measure again;

4) Check the test fixture before use. The insulation layer is intact, no breakage, nudity

and disconnection. It is forbidden to use the front cover before it is covered, otherwise it

will be in danger of electric shock;

5) Don’t use and store instruments in high temperature, high humidity, inflammable,

explosive and strong electromagnetic fields;

6) Please do not change the instrument's internal circuit at random, so as not to damage

the instrument and safety;

7) Wear a qualified eye patch when testing or repairing cars to prevent the engine from

carrying foreign matter into the eyes;

HT2018B(C) Battery System Tester 2

8) Please operate and repair vehicles in a well ventilated environment to prevent

inhalation of toxic gases;

9) If the car engine is running, do not put the instruments and accessories beside the

engine or exhaust pipe to avoid high temperature damage;

10)Pay attention to car manufacturers' warnings and precautions and maintenance

procedures when repairing automobiles;

11) Selectable battery standards:

Exact test

CCA：100~1700

IEC：100~1000

EN：100~1700

DIN：100~1000

JIS：Need to check the table CCA

Quick test

3AH~250AH

3 International electrical symbols

DC/AC

Warning caution safety sign

Dangerous voltage (danger of electric shock)

GND

Double insulated and highly insulated

Fuse

Battery

4 Product icons and instructions

Function keys and test forceps:

< > < >: Recurring, decreasing, up and down page keys;

<ESC>: Cancel, return key;

<ENTER>: Confirm, enter and test key.

Intermediate key: Enter the printing interface;

Red test clamp: Positive connection test clamp;

HT2018B(C) Battery System Tester 3

Black test clamp: Negative connection test clamp.

HT2018B(C) Battery System Tester 4

5 Functions

5.1 Battery voltage type

The battery tester can test 6V, 12V and 24V batteries. Voltage type can be selected after

the instrument is powered on.

After the battery is connected correctly, the battery startup capability test, startup load

test, maximum load test and charging system test can be selected.

5.2 Battery Test

Quick Test

5.2.1 Preparation before testing

◆If the car is in motion, please turn off the fire and turn the key to OFF position.

◆When the vehicle is running at one end of the road, the battery is just full, and the

voltage will be slightly higher than the normal value. Please turn on the headlight for

2-3 minutes, and when the voltage drops back to the normal value, now measure

again.

5.2.2 Operation

1) Connect the red test clamp to the battery positive pole; connect the black test clamp to

the battery negative pole. Attention must be made to good contact so as not to affect test

results.

2) Press < > < > button to select the battery startup ability test item and press

<ENTER> to enter the selection, as follows:

3) According to the nameplate on the battery, press < > < > button to select the quick

test or exact test. Select Quick Test here and press <ENTER> to proceed to the next

step.

Select Items

1. Start Ability

2. Starting Load

Quick Test

Exact Test

HT2018B(C) Battery System Tester 5

4) According to the battery capacity value, press < > < > button to adjust the battery

capacity value, as shown in the figure.

5) Adjust the reference standard value of battery test and press the <ENTER> button to

start the test.

6) When the test is completed, and the display area will display the test results.

Exact Test

1) Connect the red test clamp to the battery positive pole, connect the black test clamp to

the battery negative pole. Attention must be made to good contact so as not to affect test

results.

2) Press < > < > button to select the battery startup ability test item and press

<ENTER> to enter the selection, as follows:

3) According to the nameplate on the battery, press < > < > button to select the quick

test or exact test. Select Exact Test here and press <ENTER> to proceed to the next

step.

Set Bap Cap

54 AH

RESULT GOOD

12.87 V 588 CCA

100% 4.75 mΩ

SOH 100 %

Select Items

1. Start Ability

2. Starting Load

HT2018B(C) Battery System Tester 6

4) According to the battery standard and press < > < > button to choose the battery

type. If the battery is JIS standard, select CCA (SAE) as the test standard after consulting

the table and comparing CCA. After choose the battery type, now press <ENTER> to

enter the selection, as follows:

5) According to the standard value expressed on the battery, pressing < > < > button

to adjust the battery specification, and long press < > < > button to realize the

numerical adjustment. As follows:

6) Adjust the reference standard value of battery test and press the <ENTER> button to

start the test.

7) When the test is completed, and the display area will display the test results.

8) Now press the middle button to enter the print test report interface (refer to Section

5.6), press the < ESC > button will return to step (4).

Note: only HT2018C has Bluetooth printing function.

Quick Test

Exact Test

Select Bat Type

CCA IEC EN

DIN JIS ***

Select Bat Spec

500 CCA

RESULT GOOD

12.87 V 588 CCA

100% 4.75 mΩ

SOH 100 %

HT2018B(C) Battery System Tester 7

5.2.3 Battery test results instruction

1) The normal test result

Battery voltage 12.85V

Full power 100% 12.78V

75% 12.54V

50% 12.30V

25% 12.12V

Fully discharged 11.94V

CCA value 588CCA

◆The test to determine the state of the battery.

◆When testing 24V battery, CCA is 1/2 of the sum of the two 12V batteries in

series.

Internal resistance 4.75mΩ

◆The battery CCA value is greater, the resistance will be smaller in general.

◆The internal resistance of the standard is different because of different

materials battery, so there is no certain standard. But the same type of

battery with the same manufacturer does not differ greatly in resistance out

of the factory.

◆When testing 24V battery, the internal resistance is the resistance sum of

the two 12V batteries in series.

Life Show the usage state of the battery. It is recommended to replace the battery

when the life of the battery is less than 45%.

Life

Test Result

Comment

＞80%

Good

The battery is in good condition.

＞60%

Common

The battery condition is acceptable.

＞45%

Attention

Battery will be exhausted. Pay attention.

＜45%

Replace

Battery is exhausted. Please replace it.

2) Replace

RESULT GOOD

12.87 V 588 CCA

100% 4.75 mΩ

SOH 100 %

HT2018B(C) Battery System Tester 8

The test result shows that the battery life is only 32%, and the performance is poor.

Recommended to replace.

3) Life is normal and voltage is low

The test result shows that the battery life is 100% and the performance is excellent,

but the battery voltage is only 12.11V. Recommended to charge.

4) Life is normal and voltage is too low

The test result shows that the battery voltage is only 11.88V, battery voltage is too

low. That may affect the test results. It is recommended to test again after charging.

5.3 Startup Load Test

5.3.1 Preparation before testing

If the car is in motion, please turn off the fire and turn the key to OFF position.

5.3.2 Operation

1) Connect the red test clamp to the battery positive pole, connect the black test clamp to

the battery negative pole. Attention must be made to good contact so as not to affect test

results.

2) Press < > < > button to select Start Load Test, and press <ENTER> to enter the

selection, as follows:

RESULT Replace

12.37 V 415 CCA

57% 6.75 mΩ

SOH 32 %

RESULT GOOD

12.11 V 588 CCA

31% 4.75 mΩ

SOH Recharge

RESULT

11.88 V 466 CCA

8% 5.99 mΩ

SOH Charge Retest

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Hantek Apparecchiature di prova

Hantek

Hantek DPO7000 Series Manuale di installazione e funzionamento

Hantek

Hantek HT824 Manuale utente

Hantek

Hantek CC-65 Manuale utente

Hantek

Hantek DSO4004C Series Istruzioni di installazione e manutenzione

Hantek

Hantek DPO6000 Series Manuale utente

Hantek

Hantek DSO5000P Series Manuale utente

Hantek

Hantek DSO4072 Manuale utente

Hantek

Hantek 6022BE Manuale utente

Hantek

Hantek Hantek6022BL Manuale utente

Hantek

Hantek DSO1000S Series Manuale utente

Hantek

Hantek DSO4000 Series Manuale utente

Hantek

Hantek DSO-3000A Series Manuale utente

Hantek

Hantek DSO-3004 USB Series Manuale utente

Hantek

Hantek DSO2000 Series Manuale utente

Hantek

Hantek HT360 Series Manuale utente

Hantek

Hantek IDSO1070 series Manuale utente

Hantek

Hantek 6022BE Manuale utente

Hantek

Hantek 500MSa/s Manuale di riferimento

Hantek

Hantek DDS-3005 USB Manuale utente

Hantek

Hantek HT824 Manuale per l'uso e la cura

Hantek

Hantek Q 0203A Manuale utente

Hantek

Hantek MSO5000D Manuale utente

Hantek

Hantek DSO5102P Manuale utente

Hantek

Hantek IDSO Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente