HEADSOUND H2 Manuale utente
HeadSound
True Wireless Speakers
User Manual
Package Content
• 2 Bluetooth Speakers
• 1 Micro USB Charging Cable
• 1 Charging Base
• 1 User Manual
Operating Instructions
Pairing
1. Turn OFF Bluetooth function on your source of music
device (phone, laptop, PC, etc,.).
2. Press and hold on both main buttons for 3 seconds
to turn ON the speakers. Wait several seconds for
speakers to connect to each other, you will hear
“Connected “once connection is established.
3. Turn ON Bluetooth on your source of music device
(phone, laptop, PC, etc,.)
4. Search for “H2speakers”, select it and pairing will
start immediately. When you hear “beep” sound,
speakers are successfully paired with your main
device.
5. In case of malfunction of connection between the
speakers, please double click on main button of one
of the speakers to achieve true wireless speaker
connection and pairing.
Charging
• Connect the small end of the Micro USB charging
cable (included) to the Micro USB port located on
the back of the speaker. Connect the larger end of
the cable to your computer’s USB port or an AC
adaptor (not included);
• LED is red when charging, and LED will be o when
fully charged.
Usage of True Wireless Speakers
1. Distance between speakers - no more than 3 meters.
2. Speakers may work abnormally due to wrong oper-
ation or low power, charge them to the fullest again.
3. If speakers are turned on but not paired, they will
power o in 5 minutes.
4. Due to the 2.4G radio interference, if the speaker can
not pair or play music well, please turn on the speaker
again or reconnected the Bluetooth device again.
Usage with mobile phone
1. Answer Call/End call - Short press on one of speakers
button.
Safety instructions
• Never disassemble the Bluetooth Speaker in an
attempt to make any repairs as this could result in
electrical shock, burns or product failure;
• Adhere extra caution when using the Bluetooth
Speaker around children;
• Use extra caution in high temperatures;
• Product is not waterproof;
• Damage, shock, and/or injury can occur if these
warnings are not heeded properly.
FAQ
1. Doesn’t turn on:
Please check if the battery is in low power. Please
recharge and then turn on again.
2. Cannot charge:
Please check if the power supply is working for input
charging. Please check if the USB cable is working
properly.
3. No Sound:
Please check the volume on your bluetooth source
(phone, laptop, etc). Increase it
4. Doesn’t pair:
Delete H2speakers from your bluetooth source and
start the pairing process from the beginning
5. Can’t answer the incoming call:
Short press main button on one of the speakers.
Recharge the speakers to the fullest.
Specications
• Input must not exceed: DC 5V-300MA
• Bluetooth enabled device
• Stereo Bluetooth Speaker, supporting A2DP/AVRCP,
for wireless HI-FI stereo music
• Transmission distance: 10m
• Speaker: 4Ω3W
• Battery: 400mAh
• Size: 49*46mm
• Weight: 83 grams
• Play Time: 2-3 hours
• Charge Time: up to 2 hours
• Signal Noise Rate: >85dB
For comments and questions contact us at
Indice
Altri manuali HEADSOUND Altoparlanti
