Heliotherm HP06L-K-BC Manuale utente
INSTRUCTION MANUAL
CONTROL UNIT web control®321
Customer level
Version 34
INSTRUCTION MANUAL
Control Unit web control®321 - CUSTOMER LEVEL
2
Heliotherm Wärmepumpentechnik Ges.m.b.H.
Sportplatzweg 18
A-6336 Langkampfen / Tirol
Tel. +43 (0)5332 / 87496-0
Fax +43 (0)5332 / 87496-30
www.heliotherm.com
Safety Notice
Any changes and/or manipulations made to the factory
suggested settings will cancel the warranty claim.
Turn o the heat pump at the heating emergency switch before
opening the case. Or remove the fuse from electrical circuit board.
3
All rights reserved for technical changes, typesetting, printing errors, and design change. Date: June 2017
CONTENT
1. CONTROLLING ELEMENT
1.1 Controlling element web control®321 p. 5
1.1 Menu control p. 6
1.2 Certification p. 7
2. BASIC OPERATION
2.1 Setting operating mode p. 10
2.2 Setting day-time room temperature p. 10
2.3 Setting night-time room temperature p. 11
2.4 Setting hot water temperature p. 11
2.5 Display return temperature buer temperature p. 11
2.6 Display of the curr. status of the heat pump with counter p. 12
3. TIME PROGRAMMES
3.1 Setting time p. 12
3.2 Setting time programme heating p. 13
3.3 Setting time programme warm water p. 14
3.4 Setting time programme circulation pump p. 16
3.5 Setting time programme holiday p. 17
3.6 Setting time programme party p. 18
3.7 Setting time programme mixer 1 p. 18
3.8 Setting time programme holiday mixer 1 p. 18
3.9 Setting time programme party mixer 1 p. 18
3.10 Setting time programme mixer 2 p. 18
3.11 Setting time programme holiday mixer 2 p. 18
3.12 Setting time programme party mixer 2 p. 18
4. TEMPERATURES
4.1 Display temperatures p. 19
5. HOUR METER
5.1 Display Hour meter p. 20
6. HEATING CIRCUIT
6.1 Target values p. 22
6.2 Heating curve p. 23
INSTRUCTION MANUAL
Control Unit web control®321 - CUSTOMER LEVEL
4
7. HOT WATER
7.1 Hot water treatment p. 24
7.2 Circulation p. 24
8. MIXER 1 p. 25
9. MIXER 2 p. 25
10. SOLAR SYSTEM p. 25
11. MANUAL OPERATION p. 25
12. SAFETY CHAIN p. 25
13. EFFICIENCY p. 26
14. USER LEVEL p. 27
15. FAULT CLEARANCE p. 27
16. PRESET VALUES p. 27
17. MENU TREE
17.1 Main menu p. 29
17.2 Basic operation p. 30
17.3 Time programmes p. 31
17.4 Temperatures p. 32
17.5 Operating hours p. 33
17.6 Heating circuit p. 34
17.7 Hot water treatment p. 35
17.8 Mixer 1 p. 36
17.9 Mixer 2 p. 37
17.10 Solar system p. 37
17.11 Manual operation p. 38
17.12 Safety chain p. 38
17.13 Eciency p. 39
17.14 User level p. 39
17.15 Fault clearance p. 39
5
All rights reserved for technical changes, typesetting, printing errors, and design change. Date: June 2017
1. CONTROL ELEMENT
1.1 Control element web control®321
1Visual display
2Menu option
4+ 5Soft Keys
6Dial & Select
(turning knob)
Soft Key support
3Select “OK“ to
change values
and confirm
73 Color LED
Yellow _________ Stand-by
Yellow blinking __ Time delay
green _________ Heat pump operating
red ____________ Error dysfunction
LED display dark Main switch O,
or no electrical power
1
23
5
4
6
7
INSTRUCTION MANUAL
Control Unit web control®321 - CUSTOMER LEVEL
6
1.2 Menu control
The menu can be controlled with 3 elements:
• For menu jumps to the previous level or for leaving the current level, the left button „Z“ is pressed.
• For confirming or changing values, the right button „OK“ is used.
The menu selection is controlled with the rotary knob.
Rotary dial
knob button
Control button “Z“
to browse menu
Control button “OK“
to change values
and confirm
Die Österreichische EHPA Gütesiegelkommission bescheinigt, dass die folgenden Wärmepumpen die
Anforderungen des EHPA Gütesiegels für Wärmepumpen (V 1.4 | 2011) erfüllen.
The Austrian national EHPA Quality Label Commission certifies the listed heat pump(s) according to the requirements of the EHPA
Quality Regulation V1.4/2011 from the European Heat Pump Association (EHPA).
Wärmepumpen Typ
Heat pump type
Luft/Wasser
Air/Water
Modelle
Models
HP06L-K-BC, HP08L-K-BC, HP10L-K-BC, HP12L-K-BC
Vertreiber
Distributed by
Heliotherm Wärmepumpentechnik Ges.m.b.H.
Sportplatzweg 18
6336 Langkampfen
Austria
Zertifikatnummer
Certificate ID
AT-HP-00178
Gültig in
Valid in
Österreich
Austria
Gültig bis
Valid until
24.05.2015
Ing. Heinrich Huber, MSc
Dr. Hermann Halozan
Österreichische Gütesiegelkommision
Giefinggasse 2
1210 Wien
Österreich
Wien, 25.05.2012
Eine vollständige Liste aller gegenwärtig gültigen Gütesiegel findet sich unter www.ehpa.org.
A list of all valid quality labels is available at www.ehpa.org
INSTRUCTION MANUAL
Control Unit web control®321 - CUSTOMER LEVEL
10
2. BASIC OPERATION
In this display, the basic parameters such as date/time,
type of operational requirement, operating mode, requi-
rement RL-T / PU-T, HCI temperature, hot water tem-
perature and lead times are displayed with the current
operating status.
Display date/time: dd.mm.yy hh:mm
For settings refer to chapter time programme / setting time
(description on page 12)
2.1 Setting operating mode
a) O: Frost-proof
b) Automatics: Automat. hot water+heating
c) Cooling: HW + cooling
d) Summer: Hot water only
e) Con. operation: Heating curve increase by 3 K
f) Decrease: Heating curve decrease by 3 K
g) Holiday: Frost-proof, date settable
h) Party: Continuous operation for 2 hours
The current requirement is displayed below (heating, HW,
cooling, heating o, ext. requirement, none)
Basic operation
Menu Ok
12.09.12 10 : 23
Operating mode Summer
Requirement HW
2.2 Parallel displacement of the
heating curve
Setting range is 10 - 25 °C.
The actual room temperature is displayed
only if a room sensor is connected to the control
element.
Current status time programme heating
Current status time programme hot water
Basic operation
Menu Ok
Requirement HW
HCI (21) -Nor- 20 C
HW(44) -O- 45 C
Change the operating mode
Turn the rotary knob until you
reached the selection point.
Activate selection point with OK
and change with rotary knob
Confirm
OK
OK
Change the day-time room temperature
Turn the rotary knob until you
reached the selection point.
Activate selection point with OK
and change with rotary knob
Confirm
OK
OK
Questo manuale è adatto per i seguenti modelli
3
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
