HM1525 Weigh Scale Module
Page 2
Solid state equipment has operational characteristics differing from those
of electromechanical equipment. “Safety Guidelines for the Application,
Installation and Maintenance of Solid State Controls” (Allen-Bradley
Publication SGI-1.1) describes some important differences between solid
state equipment and hard-wired electromechanical devices. Because of
this difference, and also because of the wide variety of uses for solid
state equipment, all persons responsible for applying this equipment
must satisfy themselves that each intended application of this equipment
is acceptable.
In no event will the Allen-Bradley Company or Helm Instrument
Company be responsible or liable for indirect or consequential damages
resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for
illustrative purposes. Because of the many variables and requirements
associated with any particular installation, the Allen-Bradley Company or
Helm Instrument Company cannot assume responsibility or liability for
actual use based on the examples and diagrams.
No patent liability is assumed by Allen-Bradley Company or Helm
Instrument Company with respect to use of information, circuits,
equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without
written permission of the Allen-Bradley Company and Helm Instrument
Company is prohibited.
Throughout this manual we use note to make you aware of safety
considerations.
ATTENTION: Identifies information about practices or
circumstances that can lead to property damage.
Identifies information that is especially important for
successful application and understanding of the product.
Attentions help you:
identify a hazard
avoid the hazard
recognize the consequences
ATTENTION: Please check power supply ratings
before proceeding! Each tonnage module
consumes (+24, 50mA +5, 66mA). Be sure to not
overload the power supply.
Important User
Information
