Herutu ENS-HH01 Manuale utente

Hard-hat-on Sensor

ENS-HH01

Instruction Manual V1.10

Please use this Instruction manual correctly on reading well.

Please keep it carefully to be able to read immediately, when required.

ENS-HH01 
 
 
Table of Contents 
 
 
1．Overview ............................................................................................................................................... 1
2．Main part and accessories.................................................................................................................. 2
2-1．ENS-HH01 body............................................................................................................................. 2
2-2．Option............................................................................................................................................. 2
3. Safety Precautions (Be Sure to Read This)....................................................................................... 3
4．Name and Function of Each Part ....................................................................................................... 7
5．How to use............................................................................................................................................ 8
5-1．Procedures for use ....................................................................................................................... 8
5-1-1．Procedures for use with POKAYOKE plus.......................................................................... 8
5-2．How to use ..................................................................................................................................... 9
5-2-1．Use with POKAYOKE plus..................................................................................................... 9
5-3．Timing for notification of the hard hat wearing status ............................................................. 9
5-4．Test transmission.......................................................................................................................... 9
5-5．Battery level notification function............................................................................................... 9
5-6．LED indication patterns of ENS-HH01...................................................................................... 10 
5-7．Maintenance of the touch sensor.............................................................................................. 10 
6．Features and settings........................................................................................................................ 11 
6-1．Initial settings.............................................................................................................................. 11 
6-2．Pairing(registration).................................................................................................................... 12 
6-2-1．For use with POKAYOKE plus ............................................................................................ 12 
6-3．Delete the pairing........................................................................................................................ 12 
7．Installation .......................................................................................................................................... 13 
7-1．Attach the ENS-HH01 to the hard hat ....................................................................................... 13 
7-2．Replace the battery of ENS-HH01 ............................................................................................. 14 
7-2-1．Battery Replacement ........................................................................................................... 14 
7-2-2．Procedure of battery replacement ..................................................................................... 14 
7-3．Replace the touch sensor of ENS-HH01................................................................................... 17 
7-3-1．Touch sensor Replacement ................................................................................................ 17 
7-3-2．Procedure of touch sensor replacement........................................................................... 17 
8．Communication Specification .......................................................................................................... 20 
8-1．Data type setting of receiver...................................................................................................... 20 
8-2．Receiver data format .................................................................................................................. 21 
9．Cautions for use................................................................................................................................. 22 
10．Specifications................................................................................................................................... 23 
11．Dimensions Drawing........................................................................................................................ 23 

ENS-HH01

12．Troubleshooting............................................................................................................................... 24

13．After Service and Warranty............................................................................................................. 26

ENS-HH01

1．Overview

The hard-hat-on sensor “ENS-HH01”（referred to below as “the sensor”）is a wearable device that

prevents accidents that occur when employees are not wearing hard hats.

The sensor for detecting the wearing status of hard hats is integrated with the wireless unit. By attaching

the sensor to a hard hat’s chin strap, it detects the wearing status of the hard hat in real time.

Equipped with HERUTU’s Pokayoke wireless module HRF-2402, ENS-HH01 can communicate

with the following Pokayoke receivers TW-800 series (referred to below as "the receiver"), and

makes it possible to monitor whether workers are wearing hard hats by transmitting the hard hat’s

wearing status received from the receivers to a PC or PLC.

・ LAN Connection Type TW-8##R-EXL

・ RS232C Serial Output Type TW-8##R-EXS

・ CC-Link IE Field Basic Support TW-800R-EXB

*The number of ENS-HH01 that can be connected to one receiver is unlimited.

For details of receivers, refer to the instruction manual of each product.

Communication distance of approx.30m indoors (depends on usage conditions).

Waterproof and Dustproof (Protection Structure IP65)

Power source is a coin battery (CR2032). Battery life is approx. 1 year by wearing for 8 hours a day

(depending on usage conditions).

(*1) “POKAYOKE plus” is a Windows compatible application to be used in conjunction with POKAYOKE

receivers with LAN connection. The application is designed for customers who want to ensure

traceability of “Tasks using tools” or “Wearing safety protective equipment” for workers in the factory.

For details, refer to “Production Process Support Software for Pokayoke Tools POKAYOKE plus

Instruction manual”.

Worker

Pokayoke Receiver

Application

ENS-HH01

2．Main part and accessories

2-1．ENS-HH01 body

Hard-hat-on sensor ENS-HH01

【Touch Sensor Component Information】

Component Name

CAS No.

Polylactic acid resin

9051-89-2

Carbon black

1333-86-4

2-2．Option

The touch sensors are consumables. The following model is available for replacement separately.

Item name

Model

Touch Sensor

S20006-25-00

Coin battery CR2032 ×1

ENS-HH01 body ×1

Due to properties of the product, the touch sensor and other component directly touch

a customer’s skin.

*When you feel uncomfortable with your skin while wearing the sensor, stop

using the sensor immediately.

*It is recommended to wash away sweat and dirt and keep the product

clean. Rinse the main unit with water and wipe it with a dry cloth.

*ENS-HH01 is delivered with a coin cell battery installed.

Touch Sensor

ENS-HH01

3. Safety Precautions (Be Sure to Read This)

This section describes the matters to be observed in order to prevent harm to the users and other persons

and damages to the property.

■The following marks and displays classify and describe the extent of harm and damage caused by failing to

observe the display content and using this product wrongly.

This display column shows "a failure to do observe it could result in only the

personal injury or property damage".

■Handling this product

⚫This product is the wireless communication equipment made of precision parts. Do not

disassemble or modify it. Or the accident or fault may occur.

⚫Do not drop or scratch the unit. Doing so may prevent the unit from maintaining its

dustproof and waterproof performance.

■Use and storage environment

⚫DO NOT USE OR STORE the product in the following places to prevent defects,

malfunction, deterioration, fire, and electric shock:

•Do not use and store it in places exposed to direct sunlight,

•Do not use and store it in places where liquids, foreign substances, corrosive

gases or combustible gases can enter the product,

•Do not use and store it in places with high humidity or where there is abundant oil

smoke, dust, sand, etc.

■Specific handling of this product

This product is a radio equipment with certification of construction design.

⚫It is prohibited by law to disassemble or modify certified devices.

⚫Do not remove the certification label affixed to the case. It is prohibited to use any

product without the label.

⚫This product is only available in the countries where the certification is acquired.

This display column shows "a failure to do observe it could result in death or

serious personal injury".

■Handling this product

⚫Do not use this product for application that requires the extremely high reliability

affecting the human life.

⚫Do not use this product in the area which the radio wave reaches or not.

Caution

Warning

ENS-HH01

■Notes on the Radio Law

〇The wireless device used for this product is certified as a specific radio device for a radio equipment

of a low power data communication system based on the Radio Law. Therefore, a radio station

license is not required to use this product.

〇The wireless device of this product is certified under the Radio Law, so that DO NOT disassemble or

remodel this product.

〇Do not use this product near any person using cardiac pacemaker. The cardiac pacemaker may be

disturbed by electromagnetic wave, which may cause risk of life.

〇Do not use this product near any medical equipment. The medical equipment may be disturbed by

electromagnetic wave, which may cause risk of life.

〇Do not use this product near any microwave oven. Electromagnetic wave from microwave oven may

disturb radio communication.

〇This product can be used only in Japan or countries where required certification is acquired. In the

case that it is used in other countries, this product may be damaged or it may damage other equipment.

It also may conflict with the laws of that country. Please contact our sales department for the countries

that the product is certified other than Japan.

■Notes on radio interference of 2.4 GHz radio

When communicating with 2.4 GHz band wireless products, pay attention to the following points.

In this product’s frequency band not only industrial, scientific and medical equipment such as

microwave ovens but also local radio stations for mobile objects identification (which require the

license), specified low-power radio stations (license not required), and amateur radio stations (license

required) can be in operation.

〇Before using this product, make sure that there are no local radio stations for mobile objects

identification, specified low-power radio stations and amateur radio stations operating nearby.

〇In event that harmful interference occurs to any radio station by the radio wave from this product,

stop using it immediately and consult with us about avoiding interference.

〇Also contact us in case of any trouble such as harmful radio interference to specified low-power radio

stations for mobile objects identification or amateur radio stations.

ENS-HH01 is equipped with the built-in wireless module HRF-2402.

Available countries：Japan, Canada, USA, China, Thailand, Vietnam, Philippines and India.

ENS-HH01

■FCC/ISED Warning

Information about FCC Standard.

FCC CAUTION

Change or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of

RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of

RF energy that is deemed to comply without testing of specific absorption rate(SAR).

I Information about ISED Standard.

This device complies with Industry Canada’s applicable license-exempt RSSs. Operation is subject to

the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation

of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts

de licence. L’exploitation est autorisée aux deux conditions suivantes :

1) l’appareil ne doit pas produire de brouillage;

2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and

meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of

RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).

Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un

environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF)

CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée comme conforme

sans évaluation de l’exposition maximale autorisée (MPE).

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and

meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of

RF energy that is deemed to comply without testing of specific absorption rate (SAR).

Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un

environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF)

CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée comme conforme

sans évaluation du débit d’absorption spécifique (DAS).

ENS-HH01

This radio transmitter (10608A-HRF2402) identify the device by certification number or model number if

Category II) has been approved by Industry Canada to operate with the antenna types listed below with

the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater

than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Antenna type:1/4λ Dipole antenna (chip antenna) Gain: 3dBi

Antenna type:1/2λ Dipole antenna Gain: 2dBi

Antenna type:1/2λ Dipole antenna Magnet Base Gain: 2dBi

Le présent émetteur radio (10608A-HRF2402) a été approuvé par Industrie Canada pour fonctionner

avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types

d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont

strictement interdits pour l'exploitation de l'émetteur.

Type d’antenne:1/4λ Dipole antenna (chip antenna) Gain: 3dBi

Type d’antenne:1/2λ Dipole antenna Gain: 2dBi

Type d’antenne:1/2λ Dipole antenna Magnet Base Gain: 2dBi

■Thailand Radio Law (SDoC)

This telecommunication equipment is in compliance with NBTC requirements.

Indice

Manuali Sensore di perno popolari di altre marche

DAMPP-CHASER

DAMPP-CHASER Piano Life Saver Manuale di manutenzione

Stanley

Stanley Stud Sensor 50 Manuale utente

Banner

Banner World-Beam QS30 Manuale del proprietario

Renkforce

Renkforce 1170728 Manuale utente

DeWalt

DeWalt DW0100 Manuale utente

Halemeier

Halemeier MES Manuale utente

Zircon

Zircon StudSensor Pro45 Manuale utente

Condair

Condair HumiLife RE Series Guida alla pianificazione

Zircon

Zircon StudSensor Pro Manuale utente

Greenlee

Greenlee SF-420AC Manuale utente

Ele

Ele 39-1300 Manuale utente

CHERUBINI

CHERUBINI Rugiada Manuale utente

alre

alre RFHSS-114.110 Manuale utente

Crestron

Crestron Closed-Loop Photocell Light Sensor GLS-LCL Come usare

Zircon

Zircon MultiScanner L350 Manuale utente

Stanley

Stanley STHT77588 Manuale utente

Stanley

Stanley S100 Manuale utente

Airflow

Airflow Adroit DV96 Manuale utente