hikam Q7 Manuale utente
Smart IP Camera Q7, S5
Quick Guide
English
Please read this instruction before using and keep it for future reference.
Visit our website www.hi-kam.com for more information.
High Infinity Germany, Jan. 2015
Packing List
Model
Q7
S5
Power adaptor
√
√
Bracket
√
√
WiFi Antenna
√
---
Alarm Antenna
√
---
Quick Guide
√
√
Screws package
√
√
SD Card
Optional
Optional
Wireless Safety Switch
Optional
---
Interface
LED
On
Blink
Off
Arm light
Alarm Enabled
---
Alarm Disabled
Record light
SD Card detected
Recording
No SD Card
Alarm light
Alarm was triggered
---
No Alarm
Network light
Networking
Communication
No network
Double color light（Blue）
Networking
Communication
Not network
Double color light（Pink）
SD Card detected
Recording
No SD Card
1 Download App
Search “HiKam” in App Store or Google Play. Download and install the app, it is free for HiKam
user. Follow the instruction on the HiKam App to register user account.
2 Configure Network
You can use Ethernet or WiFi to connect the camera to the router.
Your router must be connected to the internet; otherwise the camera will not work.
Ethernet:
Connect the camera to the router with Ethernet cable, make sure the DHCP function is enabled in
the Router. Don’t worry, if you don’t know what DHCP means, it is highly possible that DHCP is
enabled correctly.
WiFi:
For HiKam Q7, mount the WiFi antenna onto the camera. HiKam S5 has embedded antenna.
WiFi Standard 802.1 b/g/n, 2.4GHz is supported.
You have to tell the camera your WiFi name and its password, here we show you how.
Power on the camera, open HiKam on your smart phone and follow the instruction there. It will
guide you through the setup.
If you still have problem after some attempts, please refer to the Q&A section.
The yellow LED on HiKam Q7 and the blue LED on HiKam S5 indicates you the network is
configured correctly.
3 Add Device
Input the initial password that you can find on the packaging box, to add the device. Please set
your own password immediately.
If your camera is not in the same network as your smart phone, use My Camera -> Add ->
Manual. Input the device ID that you can find on the packaging box.
PC
HiKam can also be used on PC. You have to connect the camera to the router firstly then
download and install PC software from our website. Device ID and initial password can be found
on packaging box.
Alarm Settings
My Camera -> Setting -> Alarm Settings
Here you can choose the manner of notification in case of alarm; you can also choose how to
trigger the alarm.
My Camera -> Setting -> Record Settings
Here you can choose whether or not record the video in case of alarm.
Toolbox -> Alarm Management
Here you can find the alarm logs and alarm blocking list
Setting -> Settings -> Alarm Vibrate, Alarm Ring
Here you can setup the vibration and ring ton for the smart phone in case of alarm
My Camera -> Alarm
This is the one-key switch to turn the alarm on or off.
SD Card
microSD card is used to record video. Maximal 64GB is supported.
Make sure the contact area of the memory card is facing down. Push the card in, until you hear a
click.
The blue LED on HiKam Q7 and the pink LED on HiKam S5 indicates you the valid SD card is
inserted correctly.
Q&A
Video record doesn’t work!
My Camera -> Setting -> Record Settings, to choose how to record and switch it on
Make sure the SD Card is inserted correctly and the corresponding LED is on.
Make sure the SD Card is not kaput. If necessary, check the SD Card on your PC
Forget the device password!
There is a reset hole at the bottom of the camera, use a toothpick or similar objects
inserted into the reset hole, restore the initial password: 123.
Forget the App password!
Register a new account with another E-Mail address.
WiFi Configuration / QR Code don’t work!
Check the Wi-Fi Antenna is mounted correctly.
Select the correct WiFi from the network list and re-enter the WiFi password
The camera needs several seconds to read the QR Code, hold your smart phone
steadily. Keep the distance from the camera to your smart phone between 20cm to
30cm.
If the camera is already configured with one network, it will not accept another
configuration. If you DO want to change the configuration, reset the device with the
reset hole. See “Forget the device password” above.
Connect the camera to the router with Ethernet cable and check whether the camera is
working. You can also configure the WiFi settings in this way.
Configure the WiFi at the place where you are sure the WiFi signal is strong and move
the camera to the place you want to install it.
No connection after power cycling of router!
Depending on your router and ISP (Internet Service Provider), the camera needs
several seconds or minutes to re-connect to the internet. Wait a while and try again.
No connection although Ethernet or WiFi!
Check the router is connected to the internet.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali hikam Telecamera IP
