Hirschmann RS20 series Manuale utente
RM Web L2B
Release
4.2
07/08
Technical Support
Reference Manual
Web-based Interface
Industrial ETHERNET Switch
RS20
The naming of copyrighted trademarks in this manual, even when not specially indicated, should
not be taken to mean that these names may be considered as free in the sense of the trademark
and tradename protection law and hence that they may be freely used by anyone.
© 2008 Hirschmann Automation and Control GmbH
Manuals and software are protected by copyright. All rights reserved. The copying, reproduction,
translation, conversion into any electronic medium or machine scannable form is not permitted,
either in whole or in part. An exception is the preparation of a backup copy of the software for
your own use. For devices with embedded software, the end-user license agreement on the en-
closed CD applies.
The performance features described here are binding only if they have been expressly guaran-
teed in the contract. This publication has been created by Hirschmann Automation and Control
GmbH according to the best of our knowledge. Hirschmann reserves the right to change the con-
tents of this manual without prior notice. Hirschmann can give no guarantee in respect of the
correctness or accuracy of the details in this publication.
Hirschmann can accept no responsibility for damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of use
specified in the license contract.
Printed in Germany
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Tel.: +49 1805 141538
Rel. 4.2-01-0708 – 29.7.08
Content
RM Web L2B
Release
4.2
07/08 3
Content
Content 3
About this Manual 7
Key 9
1 Opening the Web-based Interface 11
2 Basic Settings 15
2.1 System 16
2.2 Network 20
2.3 Software 22
2.3.1 Update via file selection 22
2.3.2 tftp update 23
2.4 Port Configuration 24
2.5 Load/Save 26
2.5.1 Loading the configuration 27
2.5.2 Saving the configuration 27
2.5.3 URL 28
2.5.4 Deleting a configuration 28
2.5.5 Using the AutoConfiguration Adapter (ACA) 29
2.6 Restart 31
3 Security 33
3.1 Password / SNMP 34
3.2 SNMPv1/v2 Access Setting 36
3.3 Web Access 39
3.3.1 Description of Web access 39
4Time 41
4.1 SNTP configuration 43
4.2 PTP configuration 46
4.2.1 PTP Global (MS20/MS30, Power MICE) 46
Content
4RM Web L2B
Release
4.2
07/08
5 Switching 49
5.1 Switching Global 50
5.2 Filters for MAC addresses 51
5.3 Multicasts 53
5.3.1 Global settings 54
5.3.2 Unknown Multicasts 55
5.3.3 Known Multicasts 55
5.3.4 Settings per port (table) 56
6 QoS/Priority 59
6.1 Global 60
6.2 Port configuration 62
6.2.1 Entering the port priority 63
6.3 802.1D/p Mapping 64
6.4 IP DSCP mapping 66
7 Redundancy 69
7.1 HIPER-Ring 70
7.1.1 Configuring HIPER-Ring Version 1 71
7.1.2 Configuring HIPER-Ring Version 2 (MRP Draft) 74
8 Diagnostics 77
8.1 Event log 78
8.2 Ports 79
8.2.1 Statistics table 79
8.2.2 Utilization 80
8.2.3 SFP modules 81
8.3 Topology Discovery 83
8.4 Port Mirroring 85
8.5 Device Status 87
8.6 Signal contact 89
8.6.1 Manual setting 89
8.6.2 Function monitoring 89
8.6.3 Device status 91
Content
6RM Web L2B
Release
4.2
07/08
About this Manual
RM Web L2B
Release
4.2
07/08 7
About this Manual
The "Web-based Interface" reference manual contains detailed information
on using the Web interface to operate the individual functions of the device.
The "Command Line Interface" reference manual contains detailed informa-
tion on using the Command Line Interface to operate the individual functions
of the device.
The “Installation” user manual contains a device description, safety instruc-
tions, a description of the display, and all the other information that you need
to install the device before you begin with the configuration of the device.
The “Basic Configuration” user manual contains all the information you need
to start operating the device. It takes you step by step from the first startup
operation through to the basic settings for operation in your environment.
The “Redundancy Configuration” user manual contains all the information
you need to select a suitable redundancy procedure and configure it.
The Network Management Software HiVision provides you with additional
options for smooth configuration and monitoring:
XEvent logbook.
XConfiguration of „System Location“ and „System Name“.
XConfiguration of the network address range and SNMP parameters.
XSaving the configuration on the device.
XSimultaneous configuration of multiple devices.
XConfiguration of the port display color red for a connection error.
About this Manual
8RM Web L2B
Release
4.2
07/08
Key
RM Web L2B
Release
4.2
07/08 9
Key
The designations used in this manual have the following meanings:
Symbols used:
XList
Work step
Subheading
Link Indicates a cross-reference with a stored link
Note: A note emphasizes an important fact or draws your
attention to a dependency.
Courier ASCII representation in user interface
Router with firewall
Switch with firewall
Router
Switch
Bridge
Hub
Key
10 RM Web L2B
Release
4.2
07/08
A random computer
Configuration Computer
Server
PLC -
Programmable logic
controller
I/O -
Robot
Altri manuali per RS20 series
20
Indice
Altri manuali Hirschmann Interruttore
Hirschmann
Hirschmann RSPL 20 Manuale utente
Hirschmann
Hirschmann MACH1040 Manuale utente
Hirschmann
Hirschmann SPIDER 8TX-PRO Manuale utente
Hirschmann
Hirschmann SPIDER 5TX Manuale
Hirschmann
Hirschmann PowerLION-24TP Manuale utente
Hirschmann
Hirschmann PowerMICE Manuale utente
Hirschmann
Hirschmann BXS Manuale utente
Hirschmann
Hirschmann MACH4000 Series Manuale utente
Hirschmann
Hirschmann RSP 20 Manuale utente
Hirschmann
Hirschmann MACH104-20TX-F Series Manuale utente
Hirschmann
Hirschmann LRS Series Manuale utente
Hirschmann
Hirschmann BATOne Manuale utente
Hirschmann
Hirschmann OCTOPUS 8TX-EEC Manuale utente
Hirschmann
Hirschmann MACH1000 Series Manuale utente
Hirschmann
Hirschmann MACH102 Series Manuale utente
Hirschmann
Hirschmann MACH 4000 Series Manuale utente
Hirschmann
Hirschmann OS20-001000T5T5TAFUHB Manuale utente
Hirschmann
Hirschmann RS20 series Manuale utente
Hirschmann
Hirschmann OCTOPUS OS20 Manuale utente
Hirschmann
Hirschmann MACH4000 Series Manuale utente
