HiTi Digital CS-200e Manuale utente
HiTi
user manual
ᮢ⦦
ᮢ⦦
ᆙ
ᮢ⦦
ᮢ⦦
ᆙ
www.hiti.com
HiTi Digital, Inc.
HiTi CS-200e user manual
CONTENTS
PREFACE
Announcements
Chapter 1. Getting ready
1.1 Checking box contents
1.2 Appearance of the printer and key functions
1.3 Installation
1.3.1 Ribbon Installing
1.3.2 Printer Connecting (Power & USB)
1.3.3 Card Placing
Chapter 2. Start Printing
2.1 Printer driver installation
2.2 Print settings
Chapter 3. Printer maintenance
3.1 General warranty information notice announcement
3.2 Routine / Regular printer cleaning
3.2.1 Using cleaning card
3.2.2 Using dust arrester
3.2.3 Cleaning TPH (Thermal Print Head)
Chapter 4. Help diagnosis
4.1 Warnings / Error messages and diagnosis
4.1.1 LCM control panel
4.1.2 Control panel warning messages
4.2 Identify installed driver software version
4.3 Troubleshooting
4.3.1 Printing problems
4.3.2 Releasing from card jams
4.4 Technical support
Appendix A: Technical Specifications
01
03
03
04
06
06
07
08
10
10
11
12
12
13
14
15
16
17
17
17
18
19
20
20
21
22
23
English
HiTi CS-200e user manual
Copyright
HiTi CS Card Printer © 2011. All rights reserved.
Trademarks acknowledgement
HiTi CS Card Printer is a trademark of HiTi Digital Inc. product. All other trademarks belong to their
respective holders.
Warranty
Refer to the warranty card supplied with your card printer package box for warranty terms, conditions
and limitations.
Copyright notice
01
English
Users must comply with the copyright regulations applicable in their own country. This manual must not be
reproduced, translated, photocopied, transmitted or any kind to be duplicated in whole or in part, for any
reasons and by any electronic or mechanical means whatsoever without the express a written consent of the
HiTi Digital Inc.
All the information contained in this document is subject to changed without prior notice.
HiTi Digital Inc. cannot be held liable for any errors that may be found in this manual, or for any loss or
damage arising accidentally or as a result of dissemination or use of this manual.
HiTi CS-200e user manual
Knowing your new printer
Warranty Registration
Please do take time to register online at www.hiti.com and you will be rewarded with a special offer after
registration is completed.
Assistant Icons
The following assistant icons will show up in this guide to indicate important information to be noticed.
02
We thank you for choosing HiTi CS card printer, the beginning of our long term successful association with
you together. With HiTi CS card printer, you will be able to enjoy easy operating, high quality plastic cards
printing conveniently for personalized ID card, credit cards, membership cards and badges from various
level of thickness and color style. Please ensure HiTi CS card printer to use the original consumables from
HiTi Digital Inc. For more details, visit our website at www.hiti.com .
Getting ready to start
The main purpose of this user guide is to guide you to set up your printer step by step. Please take time
to read through this carefully and complete the installation before start operating. This will save you time
during installation and use, help you to understand more about this printer and its features. Should you
English
Special warning notice More in-depth information notice
HiTi CS-200e user manual
1.1 Checking box contents
Accessories provide with your HiTi CS card printer:
Chapter1. Getting ready
HiTi CS card printer is supplied with several accessories and please do take time to check it closely.
The accessories contents list may vary depending from your region/location.
Card output hopper Weight module USB cable Power adaptor Power cord
user manual Master CD Dust arrester
with cleaning roller
Cleaning kit
03
English
If any of below item is missing, please contact your nearest HiTi customer support facility of
your local HiTi CS card printer distributor.
user manual
HiTi CS-200e user manual
1.2 Appearance of the printer and key functions
Top cover opening button
LCM control panel
Input card cover
Input card feeder (100cards)
Spec. label
Manual releasing card
jam screw socket
(flathead screwdriver)
Smart IC encoding expansion socket (Optional)
Manual card feed
input location
Ethernet expansion socket (Optional)
Power socket
USB cable connection socket
ON / OFF
hard power switch button
04
English
HiTi CS-200e user manual
05
English
Thermal print head
Ribbon ID key socket
Card thickness adjustor
Dust arrester socket
Ribbon spool fitting position
(color coded)
HiTi CS-200e user manual
1.3 Installation
1.3.1 Ribbon Installing
a. Open the top cover.
b. Place the ribbon ID key into ID key socket.
c. Insert the ribbon as shown.
abcd
d. Close the top cover slowly and press until a click sound is heard.
06
Using the original HiTi CS Card Printer Ribbon consumables will optimize your printer’s performance and
avoid causing damages to it. Use of non HiTi original consumables will void the manufacturer’s warranty
policy for the printer.
English
Please ensure your ribbon format is corresponded to installed ribbon ID key’s label.
Please make sure your ribbon film is facing top side during installation and also ensure the color
of ribbon spool/core is matching to the ribbon adapter/holder.
To optimize printing quality, please engage in printer cleaning every time when the ribbon is changed.
HiTi CS-200e user manual
1.3.2 Printer Connecting (Power & USB)
Power
USB
a. Connect power cable to power adaptor, then plug the power connector to printer’s power socket
b. Plug the power plug to an earthed power socket
c. Switch ON from the ON/OFF button to power up the printer, then the LCM control panel should light up
and display “ready” message which indicates the printer is under working condition.
Refer to the print driver installation section of this user guide for more details,
and follow the instruction carefully.
07
English
Please make sure the power plug is connected into a properly protected and earthed
electrical source.
Please make sure the print driver software is fully installed before
connecting the USB cable to your printer device.
For your own safety, please make sure the power cable is always unplugged before attempting
any service maintenance work.
ab cd
READY
HiTi CS-200e user manual
1.3.3 Card Placing
Loading (Automatic)
Loading (Manual queue jump)
a. Open input card cover.
b. Place the cards into input card feeder with positioned shown in the diagram.
c. Close the input card feed cover.
a. Insert card manually with location and positioned shown in the diagram.
b. Start printing or encoding command from PC.
a
08
English
For optimum printing quality, please ensure all cards are CR-80 standard with ISO 7810 certified.
Please do not touch the printable surface and not to use any dusty, damaged, folded or embossed
cards in your printer.
This feature is designed when a single manually queue jump in printing or
encoding job is required during fully loaded cards are positioned in input
card feeder.
Weight module is required for manual loading.
abc
Card thickness adjustor
Push
Altri manuali per CS-200e
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali HiTi Digital Stampante
HiTi Digital
HiTi Digital 640Amphi Manuale utente
HiTi Digital
HiTi Digital 630PS Manuale utente
HiTi Digital
HiTi Digital S420 Manuale utente
HiTi Digital
HiTi Digital P750L Manuale utente
HiTi Digital
HiTi Digital CS-222e Manuale utente
HiTi Digital
HiTi Digital CS-200e Istruzioni per l'installazione
HiTi Digital
HiTi Digital P710L Manuale utente
HiTi Digital
HiTi Digital P528L Manuale utente
HiTi Digital
HiTi Digital P510k Manuale utente
HiTi Digital
HiTi Digital CS-310 Manuale utente
HiTi Digital
HiTi Digital P525L Manuale utente
HiTi Digital
HiTi Digital P52L Manuale utente
HiTi Digital
HiTi Digital P710L Manuale utente
HiTi Digital
HiTi Digital P910L Manuale utente
HiTi Digital
HiTi Digital P461 Manuale utente
HiTi Digital
HiTi Digital P910L Manuale utente
HiTi Digital
HiTi Digital CS-300 Manuale utente
HiTi Digital
HiTi Digital L300 Manuale utente
HiTi Digital
HiTi Digital P750L Manuale utente
HiTi Digital
HiTi Digital P750L Manuale utente
