honor MagicWatch 2 Manuale utente
HONOR MagicWatch 2
User Guide
Contents
Getting started
Wearing the watch 1
Adjusting and Replacing the watch strap 1
Pairing your watch with your phone 2
Powering on/off and restarting the watch 3
Charging your watch 3
Buttons and gestures 5
Customizing the Down button 7
Setting time and language 7
Enabling Do not disturb mode 7
Updating the watch 7
Restoring the watch to its factory settings 8
Workout modes
Starting a workout 9
Using Smart companion 10
Workout status 10
Tracking daily activities 11
Viewing the duration of moderate to high intensity activity 11
Recording workout routes 11
Syncing and sharing your fitness and health data 12
Health management
Introduction to the three rings in Activity records on the watch 13
Monitoring your heart rate 13
Heart rate measurement during an individual workout 14
Resting heart rate measurement 15
Heart rate warning 15
Tracking sleep 16
Enabling TruSleep™ 17
Testing stress levels 17
Using Breathing exercises 18
Measuring blood oxygen levels (SpO2) 18
Activity reminder 18
Handy features
Getting notifications and deleting messages 19
Setting favorite contacts 20
Answering or rejecting incoming calls 20
Checking your call log 20
Playing music 20
i
Using Stopwatch or Timer 21
Setting an alarm 22
Using Flashlight 23
Using the Air pressure app 23
Using Compass 23
Weather reports 24
Finding your phone using your watch 24
More guides
Adjusting the ringtone 25
Adjusting screen brightness 25
Setting the vibration strength 25
Enabling frequently used features 25
Connecting earbuds 26
Viewing the Bluetooth name and MAC address 26
Check the watch's version 26
Check the watch's SN 26
Contents
ii
Getting started
Wearing the watch
Attach the heart rate monitoring area of your watch on the top of your wrist, as shown in the
following figure. To ensure the accuracy of heart rate measurement, wear your watch properly
and do not wear it above the joint in your wrist. Do not wear it too loosely or too tightly but make
sure that your watch is attached securely on your wrist.
•Your watch uses non-toxic materials that have passed strict skin allergy tests. Please rest
reassured when wearing wear it. If you experience skin discomfort when wearing the watch, take it
off and consult a doctor.
•Wear your watch correctly for greater comfort.
•You can wear your watch on either wrist.
Adjusting and Replacing the watch strap
Adjusting the strap
For watches with non-metallic straps and T-shaped buckles, you can adjust the strap to a
comfortable fit depending on the circumference of your wrist.
Removing and installing the strap
To remove a non-metallic strap, unlock the fastener, remove your current strap, and then release
the spring pin, as shown in the following figure. Follow the steps in the reverse order to install a
new strap.
1
Pairing your watch with your phone
If you have just taken the watch out of the box, press the Up button and hold until your watch
vibrates and displays a startup screen. The watch is ready to be paired via Bluetooth by default.
•For Android users:
1To download and install the Health app, please scan the QR code.
2Open the Health app and follow the onscreen instructions to grant required permissions to
the app.
3Go to Devices > ADD > Smart watchs, and touch the device you wish to pair.
4Touch PAIR and the app will automatically search for nearby available Bluetooth devices.
Once your watch is found, touch its name to start pairing.
5When a pairing request is displayed on the watch screen, touch to pair your watch and
phone. Confirm the pairing on your phone as well.
•For iOS users:
1To download and install the Health app, please scan the QR code.
2Open the Health app, go to Devices > ADD > Smart watchs, and touch the device you
wish to pair.
HONOR MagicWatch 2 46 mm needs to turn on the Bluetooth connection, on the phone go to
Settings > Bluetooth. The watch should show up automatically, touch your device, then touch
to finish pairing.
3Touch PAIR and the app will automatically search for nearby available Bluetooth devices.
Once your watch is found, touch its name to start pairing.
4When a pairing request appears on your watch screen, touch to pair your watch and
phone.
Getting started
2
•If your watch does not respond after you touch to confirm the pairing request, press the Down
button and hold to unlock your watch, and initiate a pairing procedure again.
•Your watch will display an icon on the screen to inform you that pairing was successful. It will then
receive information (such as the date and time) from your phone.
•If the paring failed, your watch screen will display an icon to inform you that pairing was
unsuccessful. It will then return to the startup screen.
•A watch can be connected with only one phone at any given time, and vice versa. If you want to
pair your watch with another phone, disconnect your watch from the current phone using the
Health app, and then pair your watch with another phone using the Health app.
Powering on/off and restarting the watch
Powering on the watch
•When the watch is powered off, press and hold the Up button to power on the watch.
•When the watch is powered off, the watch will automatically power on if you charge it.
If you power on the watch when the battery level is critically low, the watch will remind you to
charge it and the watch's screen will turn off after 2 seconds. You will be unable to power on the
watch until you charge it.
Powering off the watch
•When the watch is powered on, press and hold the Up button, and then touch Power off.
•When the watch is powered on, press the Up button while on the home screen, swipe up or
down until you find Settings, touch it, go to System > Power off, and then touch √ to confirm.
•If the battery level is critically low, the watch will vibrate and then automatically power off.
Restarting the watch
•When the watch is powered on, press and hold the Up button, and then touch Restart.
•When the watch is powered on, from the home screen press the Up button, swipe until you find
Settings, touch it, go to System > Restart, and then touch √ to confirm your choice.
Force restarting the watch
•Press and hold the Up button for at least 16 seconds to force restart the watch.
Charging your watch
Charging
1Connect the USB Type-C port and power adapter and then plug in the power adapter.
Getting started
3
2Rest your watch on top of the charging cradle, ensuring that the contacts on your watch and
the cradle are aligned. Wait until the charging icon appears on your watch screen.
3When your watch is fully charged, 100% will be displayed on the watch screen and the
charging will stop automatically. If the battery level is below 100% and the charger is still
connected to the phone, the charging will start automatically.
•Use the dedicated charging cable, charging cradle, rated output voltage of 5 V, and rated output
current of 1 A or higher to charge your watch.
•It is recommended that you lift the charging cradle to attach it to your watch. Ensure that the side
of your watch with buttons is aligned with the charging port of the cradle. After the cradle and
watch are connected properly, check to see if the charging icon is displayed. If you cannot see the
charging icon, you may need to slightly adjust the position of the cradle until contact is established
and the charging icon appears.
•Your watch will automatically power off when its battery level is too low. The icon will be
displayed during charging. After it is charged for a while, your watch will automatically power on.
Charging time
Your watch will be fully charged within two hours. When the charging indicator displays 100%,
the watch is fully charged. Disconnect your watch from the power adapter once it is fully
charged.
•Charge your watch in a dry and well-ventilated environment.
•Before charging, make sure that the charging port and metal parts are clean and dry to prevent
short circuits or any other risks.
•Before charging, make sure the charging port is dry. Wipe off any water or sweat stains.
•The charging cradle is not water resistant, so keep it dry at all times.
•It is recommended that the ambient temperature is between 0 and 45°C.
•To protect the battery, the charging current will be reduced if the ambient temperature is low, which
will prolong the charging time without affecting the battery lifespan.
Getting started
4
Checking the Battery Level
Use one of the following three methods to check the battery level:
Method 1: When your watch is connected to the charger, you can check the battery level on the
charging screen that is displayed automatically. Press the Up button to exit the charging screen.
Method 2: Swipe the home screen from top to bottom and then check the battery level in the
drop-down menu.
Method 3: Check the battery level on the device details screen in the Health app.
Buttons and gestures
The watch is equipped with a color touchscreen that is highly responsive to your touches and
can be swiped in different directions.
Up button
Operation Function Remarks
Press •Wake watch screen when
the screen is off.
•Access the app list screen
from the home screen.
•Return to the home screen.
There are certain exceptional
scenarios such as for calls and
workouts.
Press and hold •Power on your watch when
the watch is off.
•Access the restart/power off
screen when the watch is
on.
Getting started
5
Down button
Operation Function Remarks
Press Open the workout app.
Access the customized feature
you set.
There are certain exceptional
scenarios such as for calls and
workouts.
Button functions during a workout
Operation Function
Press the Up button Lock/unlock, mute, or end workout
Press the Down button Switch screen.
Press and hold the Up button Finish the workout.
Swipe up or down on the screen Switch screen.
Touch the screen and hold Show a different data type.
Gestures
Operation Function
Touch Choose and confirm.
Touch and hold on the home screen Change the watch face.
Swipe up on the home screen View notifications.
Swipe down on the home screen View the shortcut menu.
Swipe left or right View your heart rate data, workout data, and
weather information.
Swipe right Return to the previous screen.
Wake the screen
•Press the Up button.
•Raise or rotate your wrist inwards.
•Swipe down on the home screen to open the shortcut menu. Enable Screen on and the
screen will stay on 5 minutes.
You can enable the Raise to wake function in the Health app by going to the details screen of your
watch.
Turn off the screen
•Lower or rotate your wrist outwards.
•The screen will turn off automatically 5 seconds after the watch's screen is turned on if no
operation is performed within this period of time. If any operation is performed, the screen will
turn off 15 seconds after it is turned on.
Getting started
6
From the home screen press the Up button and go to Settings > Display > Advanced to adjust the
duration it takes for your watch to go to sleep and turn off the screen. The duration is set to Auto by
default.
Customizing the Down button
1From the home screen press the Up button and go to Settings > Down button.
2Touch an app from the list. This app will be opened when you press the Down button.
By default, pressing the Down button will open the Workout app.
Setting time and language
You do not need to set the time and language on your watch. When the watch is connected with
your phone, the time and language settings on your phone will be automatically synced to your
watch.
If you change the language, time, or time format on your phone, the changes will be
automatically synced to your watch when the watch and phone are connected.
•For iOS users: Open your phone, go to Settings > General > Language & Region, set the
language and region, and then connect the watch with your phone to sync the settings.
•For Android users: Open your phone, choose Settings > System > Language & input, set the
language, and then connect the watch with your phone to sync the settings.
Enabling Do not disturb mode
To enable Do not disturb mode, swipe down on your watch's home screen, touch Do not
disturb, and then touch √ to confirm.
If your watch enters Do not disturb mode:
1The watch will not vibrate for incoming calls, but you can still answer or reject incoming calls
with the watch.
2Messages and notifications will not be displayed on the watch, and the Raise wrist to wake
screen feature will be disabled.
If your watch does not support the calling feature, you will be unable to answer or reject incoming
calls with the watch.
Updating the watch
Method 1:
Getting started
7
Altri manuali per MagicWatch 2
1
Indice
Altri manuali honor Orologio
honor
honor Watch 4 Manuale utente
honor
honor HES-B39 Manuale utente
honor
honor TMA-B19 Manuale utente
honor
honor MagicWatch 2 Manuale utente
honor
honor Band 6 Manuale utente
honor
honor HES-B09 Manuale utente
honor
honor Watch ES Manuale utente
honor
honor Band 7 Manuale utente
honor
honor Band Z1 Manuale utente
honor
honor Watch GS Pro Manuale utente
