HP StorageWorks 7110 - Virtual Array Manuale utente
VA Virtual Front Panel Commands
HP15 Firmware Release
April, 2002
Command Function
help Displays a description of each command.
setup Performs Virtual Front Panel configuration.
dsp Displays subsystem status.
cfg Performs subsystem configuration (LUN creation).
mgr Performs subsystem management operations.
fmt Performs an subsystem format.
rbld Performs rebuild operations.
recover Performs NVRAM recovery operations.
secure Performs security operations.
log Displays Logs
scsi Performs scsi command for provided cdb.
Usage Notes
Ø
Ø
Ø
To maintain consistency with earlier versions of the VFP, all commands can be prefaced with "vfp".
For help with a specific command, use the -? Option. For example, setup -?
For command recall, type “<” or “>”.
Command Options and Arguments Description
setup -e {on | off}
-r <value>
-c <value>
-b <int>
-e: Sets character echo
-r: Sets the number of rows:
<value>: range 5 – 1000
-c: Sets the number of columns:
<value>: ranger 40 - 8000
-b: Sets baud rate
<int> : 0, 1, 2, or 3
for 9600, 19200, 38400, 57600
Note: A firmware reset will restore the
default value of 9600.
dsp dsp (no argument follows)
-c [m/c1 | m/c2]
-d [fruLocation]
-L [LUN ID]
-s
-e
-f
Displays general information about the
subsystem.
-c: display controller information:
m/c1: controller 1, m/c2 controller 2
-d: display drive information:
[fruLocation] m/d#
-L: display LUN information (default for
all existing luns).
[LUN ID]: specify a requested LunID
-s: display subsystem settings
-e: enclosure information
-f: list of discovered FRUs
cfg cfg -L <LUN ID> -a <capacity> [{G|g}|{K|k}] –g <RG Id>
To Create a LUN requires three
parameters, LUN ID, capacity and RD
Id.
-L <LUN ID>: specify LUN ID to be
created.
-a <capacity>: specify LUN capacity.
Capacity is default to MB.
If followed by ‘K’ or ‘k’, the capacity is in
kilobytes and must be a multiple of
512.
If followed by ‘G’ or ‘g’, the capacity is in
gigabytes.
-g <RG ID>: redundancy group id. For
VA 7100 set to 1, for VA 7400 set to 1
or 2.
For valid number of LUNs to create,
check dsp –s for CREATE LUN LIMIT.
cfg -L <LUN ID> -d -L followed by –d: deletes LUN, no
need to specify capacity, just LUN ID.
mgr -s {shut | start}
-R {full | partial}
-L <loop id> -c {1|2}
-t {1 | 2 | 4} –c {1|2}
-S {1 | 2} –c {1 | 2}
-os {hpux | nt | win2k | linux | solaris | aix | netware |
generic | tru64 | openVMS | mpe | solarisCluster} –c {1 | 2}
-B {autoraid | raid1}
-O { on | off }
-q <queue full threshold>
-ds { on | off }
-p {on | off }
-V <Revision>
-s: Shutdown or restart the disk array
-R: Reset the disk array
-L: Set the FC Port Loop ID for the
Controller Port.
-t: Set the topology for the Controller
Port. Valid Arguments:
1- Private Topology
2 - Public Topology
4- Direct Fabric Attached Topology.
-S: Set the FC Port Speed for the
Controller Port.
Valid Arguments:
1- 1 GBit/sec Data Rate
2- 2 GBit/sec Data Rate
-c: Controller for which the port speed
will be set.
-os: Set Host behavior for controller
specified.
-c: Controller for which the host
behavior will be set.
-B: sets array RAID level (AutoRaid |
RAID 1).
-O: set enable optimize policy on/off.
-q: set queue full threshold ( 0 to 4096)
-ds: set disable secondary path
presentation
The -ds option determines whether the
array makes the non-optimal path to
LUNs visible to hosts. When set to ON,
secondary path presentation is enabled
and all LUNs are “visible” through all
ports on all controllers. When set to
OFF, each LUN will be “visible” only on
the controller that is the optimal
controller for that LUN. The optimal
controller is the one associated with the
redundancy group of which the LUN is a
part.
-p: Enable/disable prefetch.
-V: Set volume set revision. Valid
arguments:
1 – For HP01, HP02, HP11, HP13
2 – For HP14, HP15 and greater
fmt No options Perform array format (will destroy all
user data). User will be prompted with a
yes/no. The word ‘yes’ must be
entered completely. Otherwise the
format command will be canceled.
rbld -p
-a {on | off}
-p: Displays status/progress of a
subsystem rebuild.
-a: enables or disables autorebuild
recover No options
-s
Perform a recover process. Will ask for
user’s verification to proceed.
-s: returns the recoverability status or
the disk array, as well as the status of
the recovery progress.
secure -R
-e
-d
-R: Resets the password to AUTORAID.
-e: enables security.
-d: disables security.
log No options
-p <number of most recent events to display>
The log command ignores the row settings. If row setting
is less than 25, log command will set it to 25. In any case,
the row setting will be ignored when dispalying logs.
No options displays all events in buffer.
-p: display a given number of most
recent events.
scsi -cdb <cdblen> <cdb bytes…> <direction> [ -cdbcrc <cdb
crc>]
[ -lun <lunId> ]
[ -data <data len> <data bytes…> [ -datacrc <data crc> ] ]
direction can be: nodata | datain |
dataout
Documentation about this interface is
available upon request.
Altri manuali per StorageWorks 7110 - Virtual Array
9
Altri manuali HP Magazzinaggio
HP
HP C5726A - SureStore DLT 80E Tape Drive Manuale utente
HP
HP C2233 Manuale utente
HP
HP Invent Q1575 Series Istruzioni per il montaggio
HP
HP P9000 Manuale utente
HP
HP StorageWorks 8B - FC Entry Switch Manuale utente
HP
HP P9000 Manuale di istruzioni
HP
HP StoreOnce B6000 Manuale utente
HP
HP NetStorage 6000 Manuale utente
HP
HP Surestore Tape Library Model 3/30 Manuale
HP
HP StoreOnce B6000 Manuale utente
HP
HP StorageWorks P2000 Manuale utente
HP
HP POD 20c Manuale
HP
HP AJ750A - StorageWorks Modular Smart Array 2000 Dual I/O Storage... Manuale di istruzioni
HP
HP Xw4550 - Workstation - 2 GB RAM Manuale utente
HP
HP DW017B - StorageWorks Ultrium 448 Tape Drive Manuale utente
HP
HP 12Gb SAS SSDs Istruzioni utente
HP
HP StorageWorks 2000fc Manuale utente
HP
HP P9000 Manuale utente
HP
HP D2D100 Manuale utente
HP
HP StorageWorks 8000 - NAS Manuale utente
Manuali Magazzinaggio popolari di altre marche
Panasonic
Panasonic LKM-F931-1 Manuale utente
Tabernus
Tabernus Enterprise Erase E2400 Manuale utente
Rocstor
Rocstor COMMANDER 3F series Manuale utente
Western Digital
Western Digital Ultrastar Data60 Manuale utente
Dell
Dell PowerVault MD3600f Series Manuale utente
CFI
CFI TERA STOR SATA RAID IV Manuale utente