Huawei HW-TX-5000 Manuale utente

HUAWEI TECHNOLOGIES CO., LTD.

HW-TX-5000 Autotransformer

Quick Guide

Issue: 01

Date: 2018-06-29

1Overview

2Installation

(1) Cover

(2) Ventilation valve

(3) Mounting bracket

(4) Heat sink

(5) Hanging kit

(6) AC input power cable gland (INPUT, 3/4 in.)

(7) AC output power cable gland (OUTPUT, 3/4 in.)

1. Plan the installation clearances of the autotransformer.

Clearances Angle

Mounting Hole Dimensions

2. Install the mounting bracket (using the frame post as an example).

•Prepare the tightening screws according to the load-bearing structure. This document introduces

how to install the autotransformer on a wall as an example. The installation method on a support

is the same as the installation method on a frame post. Prepare M6 stainless bolt assemblies

(including flat washers, spring washers, and M6 bolts) with appropriate lengths as well as

matched flat washers and nuts based on the support specifications.

•Secure the mounting bracket using either of the following hole combining methods: 1. line

combination (1, 2, and 4); 2. staggered combination (1, 3, and 5).

•The autotransformer weighs about 13 kg.

Load

Bearing

Structure

Frame

post

Brick wall/Fiber

-cement

composite panel

Plywood

Tightening

Screw

M6 tapping

screw

M6 expansion bolt

M6 expansion

anchor screw

Screw

Quantity

3 PCS

Screw

Appearance

Frame post Level Wall panel

NOTICE

3Cable Connections

Preparing for Installation

3.1

•Connect cables in accordance with the local installation laws and regulations.

•Do not install cables with power on.

Cable

Type

Conductor Cross

Sectional Area

Range

Source

AC input

power cable

•

Use cables that can withstand 90°C (194°F) or

105°C (221°F).

•

Two single-core outdoor copper cables (L1, L2)

L1, L2: 10

–6 AWG

Purchase

d by the

customer

AC output

power cable

•

Use cables that can withstand 90°C (194°F) or

105°C (221°F).

•

Four single-

core outdoor copper cables (L1, N, L2,

and PE)

L1, N, and L2:

–6 AWG

PE: 8 AWG

Purchase

d by the

customer

Component

Description

Source

switch

Recommended: a 2

-pole AC circuit breaker with a rated voltage greater

than or equal to 240 V AC and a rated current of:

•

25 A (SUN2000-3.8KTL/5KTL/7.6KTL-USL0)

•

30 A (SUN2000-9KTL/10KTL/11.4KTL-USL0)

Purchase

d by the

customer

NOTICE

3. Install the autotransformer on the

mounting bracket. 4. Tighten the screws.

The specifications of the pipes should comply with those of the cable glands. For example, for a 3/4 in.

waterproof block, a 3/4 in. pipe is recommended. The pipe appearance shown in the following figure is

for reference only. The actual pipes prevail.

Nut Conduit

Fitting

Preparing Threading Pipes

3.2

Threading Pipe Cable Hole Diameter at the Enclosure Bottom

•Do not open the cover in rainy or snowy days. If you have to, take protective measures to

prevent rain or snow from entering the Autotransformer compartment.

•Do not leave unused screws in the Autotransformer compartment.

NOTICE

Installing the AC Input Power Cable

3.4

Removing the Cover and PE Cable

3.3

Installing the AC Output Power Cable

3.5

•When connecting the cable, ensure that the exposed core wire is totally inserted into the cable hole

and connected securely. Failing to do so maycause the autotransformer malfunction and damage.

•In the following figure, 1.0 mm x 5.5 mm (0.04 in. x 0.22 in.) indicates the thickness and width of

the screwdriver blade.

NOTICE

4Installing the PE Cable and Cover

•Before closing the cover, check that the cables are correctly and securely connected. Then

take proper measures to ensure that the pipe conduits and fittings are reliably secured. Seal

cable holes to ensure that the cover and sealing washer are intact and free from any foreign

objects. Clean the foreign objects in the maintenance compartment if there is any.

•If the screws on the enclosure door are lost, obtain the spare screws from the fitting bag.

NOTICE

Huawei Technologies Co., Ltd.

Huawei Industrial Base, Bantian, Longgang

Shenzhen 518129 People's Republic of China

www.huawei.com

Indice

Altri manuali Huawei Hardware di rete

Huawei

Huawei RRU3804 Manuale utente

Huawei

Huawei OptiX RTN 950A Manuale utente

Huawei

Huawei RT-1CPOS Manuale utente

Huawei

Huawei CR-P4CF Manuale utente

Huawei

Huawei SmartAX MT880a Manuale utente

Huawei

Huawei RT-FIC-16ASE Manuale utente

Huawei

Huawei SmartAX MA5800-X15 Manuale utente

Huawei

Huawei CR52-POS/STM64 Manuale utente

Huawei

Huawei CR-E4GC Manuale utente

Huawei

Huawei CR52-SRUA Manuale utente

Huawei

Huawei SUN2000 Series Manuale utente

Huawei

Huawei FusionModule5000 Manuale operativo

Huawei

Huawei XMC-1 ODU Manuale utente

Huawei

Huawei OptiX OSN 8800 T64 Manuale utente

Huawei

Huawei E5785-320a Specifiche tecniche

Huawei

Huawei NIP6320 Manuale utente

Huawei

Huawei RT-FIC-16LS Manuale utente

Huawei

Huawei eAN3810A Guida di riferimento rapido

Huawei

Huawei FIC-1/2ADSL Manuale utente

Huawei

Huawei FusionModule500 Manuale utente

Huawei

Huawei RAN14.0 Specifiche tecniche

Huawei

Huawei SmartLi 1.0 Manuale utente

Huawei

Huawei EN83CTLC Manuale utente

Huawei

Huawei EchoLife HG8245 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente