Huawei AR100 Series Manuale utente

HUAWEI TECHNOLOGIES CO., LTD

Quick Start Guide

Issue: 18 (2019-05-22)

Part Number: 31505422

AR100&AR120&AR150&AR160&AR200&

AR1200&AR2200&AR3200&AR3600 Series

Enterprise Routers

Thank you for purchasing a Huawei AR series router. This guide describes how to install AR100, AR120, AR150,

AR160, AR200, AR1200, AR2200, AR3200, and AR3600 series routers. It also explains how to log in to your router

for the first time.

For more information, see the Hardware Installation and Maintenance Guide for your router on the Huawei

support website.

The installation, cable connection, and login methods for most AR series routers are similar. This guide uses the

AR1220 as an example.

Figures in the document are for reference only and may be different from actual devices.

Any procedural differences between models are specified at the start of each section.

1 About This Guide

Chassis (with the product model on the nameplate)

Power cable

Power adapter (only delivered with the

AR100/AR120/AR150/AR160/AR200 series routers)

Installation accessory package:

- Ground cable

- Quick Start Guide

- Rubber pads

- Console cable

- Warranty Card

- Mounting brackets

- Locking latches

- Screws

The numbers and types of items in the installation accessory package differ for different product models.

The installation accessory package of an AR100/AR120/AR150/AR160/AR200 series router does not include the console cable

and mounting brackets.

The installation accessory package of an AR1200 series router does not include the console cable.

NOTE

2 Packing List

3 Safety Guidelines

To ensure personal and equipment safety, observe all the safety precautions on the equipment and in this

document. WARNING and CAUTION items do not cover all the safety precautions and are only supplementary

to the safety precautions.

Follow all the safety precautions and instructions provided by Huawei. The safety precautions outlined in this

document are only requirements of Huawei and do not include general safety requirements. Huawei is not

liable for any consequence that results from violation of regulations pertaining to safe operations or safety

codes pertaining to design, production, and equipment use.

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be

required to take adequate measures.

Take ESD protection measures during router installation and maintenance. For example, wear ESD gloves or an ESD wrist strap.

Do not place other objects on the router.

WARNING

CAUTION

Laser beams will cause eye damage. Do not look into bores of optical modules or optical fibers without eye protection.

Do not install power cables while the power is on.

Do not turn on the power until you have finished installing the chassis and connecting cables.

4 Site Environment

Do not place this product in an environment with flammable or explosive gases, or smoke.

The installation site must be free from leaking or dripping water, heavy dew, and humidity. If the relative

humidity is high, use dehumidifiers or dehumidifying air conditioners.

The installation site must be well ventilated. Ensure that air vents on the equipment are not blocked.

Do not install the equipment in a dusty environment.

Leave at least 50 mm clearance at the rear and both sides of the chassis for heat dissipation.

If multiple routers are installed in a cabinet/rack, leave at least 1 U (44.45 mm) distance between each two

routers.

Ensure that the temperature and humidity at the installation site meet the router operation requirements. For

the specific requirements, see the Hardware Description for your router on the Huawei support website.

5 Installing the Router

Scenario 1: Desk Mounting

Scenario 2: Wall Mounting

The AR100/AR120/AR150/AR160/AR200 and AR1200 series routers can be desk-mounted.

Do not stack routers on top of or closely next to each other.

Some router models provide a security slot ( ) on the panel of the chassis. You can install a security lock

(separately purchased) in this slot to protect the router against theft.

Before You Start

Installation Procedure

Attach four rubber pads to the bottom.

Place the router on a desk.

Step 1

Step 2

(Optional) Install a security lock.

Connect the ground cable to the ground point.

Step 3

Step 4

The AR100/AR120/AR150/AR160/AR200 and AR1200 series routers can be wall-mounted.

Before drilling holes in a wall, make sure there are no power cables in the wall to avoid electric shock.

Ensure that there are no flammable or explosive materials near the router and no obstructions within 100 mm around the router.

The panel with interfaces must face down to protect the interfaces from water.

The distance between two installation holes of the AR100 series, AR129CV, AR129CVW, AR129CGVW-L, AR169CVW, and

AR169CVW-4B4S routers is 120 mm.

The distance between two installation holes of the AR161EW, AR161EW-M1, AR169EW, and AR169EGW-L routers is 185 mm.

The distance between two installation holes of the AR120 (except the AR129CV, AR129CVW, AR129CGVW-L) /AR150/AR200

/AR160 (except the AR169CVW, AR169CVW-4B4S, AR161EW, AR161EW-M1, AR169EW, AR169EGW-L) series routers is 130 mm.

The distance between two installation holes of the AR1200 series routers is 270 mm.

Before You Start

Use the marker to mark installation hole positions. The distance between two installation holes is 270 mm.

Fix M4 mounting screws against the wall and leave 2 mm distance away from the wall.

Hang the router on the mounting screws.

Connect the ground cable to the ground point.

Step 1

Step 2

Step 3

Step 4

Installation Procedure

Scenario 3: Cabinet/Rack Mounting

AR series routers can be installed in a 19-inch standard cabinet/rack. Cabinets purchased from other vendors

must have enough space for equipment installation.

If the distance between front and rear mounting rails is not within the required range, install guide rails or a

tray in the cabinet/rack to support the chassis. Guide rails or trays are not delivered with the product and must

be purchased separately.

Cabinet mounting is not recommended for Wi-Fi-capable routers.

If routers with the 3G or LTE function are installed in a cabinet, use indoor remote antennas for the routers.

Install indoor remote antennas on the primary 3G or LTE interfaces on the routers.

The AR100 series, AR129CV, AR129CVW, AR129CGVW-L, AR169CVW, and AR169CVW-4B4S routers cannot

be installed in a cabinet.

In this document, AR2204E series refer to AR2204-51GE-P, AR2204-51GE, AR2204-51GE-R, AR2204-48GE-P,

AR2204-27GE-P, AR2204-27GE, AR2204-24GE, AR2204E, AR2204XE, AR2204XE-DC, AR2204E-D-27GE, and

AR2204E-D.

Before You Start

Some router models have specific installation requirements. Refer to the following table for

details about your router model.

Chassis is heavy, so it is recommended that you install guide rails (separately purchased) in the cabinet to support the chassis.

AR2204/AR2220E/AR2204E series

AR2220/AR2240/AR2240C/AR3260/AR3670

Ensure a distance of 375–454 mm or 507–566 mm between the front and rear mounting brackets.

Leave 1 U between the floating nuts on each front mounting rail, and 1 U between those on the rear rails. Ensure the lower

floating nut on each mounting rail is level with those on the other mounting rails.

2 mm

270 mm

Attach mounting brackets to the router with M4 screws. Determine the mounting method

according to the brackets delivered with your router.

Step 1

Installation Procedure

Install four floating nuts on front mounting rails, two on each side. Install the floating nuts in two

mounting holes with one hole between them.

Hold bottom of the router and push the router into the cabinet.

Use M6 screws to secure the router onto the cabinet/rack.

Connect the ground cable to the ground point.

Step 2

Step 3

Step 4

Step 5

Applicable to AR120/AR150/AR160

/AR200 series

Applicable to AR2201-48FE/AR2202-48FE

Applicable to AR1200 series

Applicable to AR2220 Applicable to AR2240/AR2240C Applicable to AR3260/AR3670

1 U

M6 screw

Distance between mounting rails:

507 mm-566 mm

Distance between mounting rails:

375 mm-454 mm

Applicable to AR2204/AR2220E/

AR2204E series

6 Installing Cards

Before You Start

The methods for installing SIC, WSIC, XSIC, and SRU cards into SIC, WSIC, XSIC, and SRU slots are the same.

The procedure in scenario 1 installs a SIC card into a SIC slot without removing the guide rail.

Slots can be combined into a bigger slot on an AR router. The procedure in scenario 2 installs a WSIC card into

two SIC slots with the guide rail removed.

For information about the cards supported by your model, see Cards in the Hardware Description of your

router on the Huawei support website.

All cards are hot swappable.

Before installing a card, wear an ESD wrist strap or ESD gloves.

When installing a card, slowly push it into the slot. If you feel resistance or find the card inclined, pull the card

out and push it into the slot again. Do not push the card with force; otherwise, the connectors on the card

and router backplane may be damaged.

Install filler panels in vacant slots.

Installation Procedure

Use a Phillips screwdriver to loosen the captive screw on the filler panel counterclockwise.

Pull the filler panel out by the captive screw. Keep the filler panel for future use.

Turn the eject lever of the card 45 degrees outward. Push the card into the chassis with your thumbs.

Rotate the ejector lever inward to lock the card after the card is completely in the chassis.

Use the Phillips screwdriver to fasten the captive screws clockwise.

Step 1

Step 2

Step 3

Step 4

Step 5

Scenario 1: Not Removing Guide Rails

Installation Procedure

Use a Phillips screwdriver to loosen the captive screws on the filler panels on the two SIC

slots counterclockwise.

Pull the filler panel out by the captive screw. Keep the filler panel for future use.

Use the Phillips screwdriver to loosen the screw on the guide rail.

Remove the guide rail in the middle of the chassis.

Turn the eject lever of the card 45 degrees outward. Push the card into the chassis with your thumbs.

Rotate the ejector lever inward to lock the card after the card is completely in the chassis.

Use the Phillips screwdriver to fasten the captive screws clockwise.

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Scenario 2: Removing a Guide Rail

3 54

7 Connecting Cables

Power cables must be more than 10 cm away from signal cables.

Optical fibers must be used with optical modules.

The bend radius of optical fibers must be larger than 40 mm.

For the ground cable, attach the M4 lug to the router and the M6 lug to the ground point.

If your router uses AC power supply, use AC power cables in compliance with local standards.

If your router uses DC power supply, ensure that the positive and negative cables are connected to the positive

and negative poles correctly.

Antennas need to be installed for routers that provide the Wi-Fi or LTE/3G functions.

Before You Start

ACT RST

SYS WAN

7 7

No.

1 5

Item Connect To No. Item Connect To

Ground cable

AC power cable

Ethernet cable

USB port

Console cable

Protection ground

External power source

Switch or PC

Upstream network device

Operation terminal

(usually a PC)

USB flash drive

Ethernet cable

Operation terminal

(usually a PC)

~100-240V;50/60Hz;2A

FE0 FE1 FE2 FE3 FE4 FE5 FE6 FE7

GE0 GE1

CON/AUX

EN EN

2 1

management

MGMT

network

2456

8.1 Using the default web login settings

8 Logging In to the Router for the First Time

Before You Start

RST

SYS WAN

ACT

Use a network cable to connect a PC to the management interface marked with the Management

silkscreen on the router.

Step 2

Step 3

Step 1 Turn on the power switch on the external power supply and log in to the router after the SYS indicator

blinks once every 2 seconds (indicating that the router is running properly).

RST

SYS

~100-240V;50/60Hz;2A

FE0 FE1 FE2 FE3 FE4 FE5 FE6 FE7

GE0 GE1

CON/AUX

EN EN

2 1

management

OFF

Network cable

GE0

management

Network port

If the Management silkscreen is not found on the panel of the router, find the corresponding

management interface based on the router model.

AR150 series: FE3 (Ethernet0/0/3).

AR160 series: GE0 (GigabitEthernet0/0/0).

AR200 series: FE6 (Ethernet0/0/6).

Assign the PC with an IP address on the same network segment as the router IP address. The available IP

addresses are in the range from 192.168.1.2 to 192.168.1.254, and the subnet mask is 255.255.255.0.

If the web page is displayed abnormally, the browser version may be too low. Upgrade the browser and log in

to the web platform using Mozilla Firefox 12.0 or later, Google Chrome 23 or later, or Internet Explorer 8.0 or

later.

The login page varies according to version.

You can also scan the QR code on the right to watch the video introducing the procedure for logging in to

routers in web mode.

NOTE

Step 4 Start the browser, enter the URL https://192.168.1.1 in the address box, and press Enter to access the login

page.

Step 5 Enter the user name and password, and click Login to access the web page.

On the web page, you can configure the router. To switch between the Classics web system and the

EasyOperation web system, click Switch Version in the upper right corner. For more information, see the

Web-based Configuration of the product.

If you fail to log in to the web platform, the current software version of the router does not support login using

the default web login settings. In this case, try the method in 8.2 Using the configured web login settings.

8.2 Using the configured web login settings

Use a console cable to connect a PC to the Console interface of the router.

Start the terminal simulation software, create a connection, configure the connected port, and set

communication parameters as follows.

Step 1

Step 2

Press Enter until the following information is displayed. (The following information is only for reference)Step 3

Install third-party terminal simulation software on the PC by referring to user manual or online help.

The password entered in interactive mode is not displayed on the screen.

Before You Start

Transmission rate: 9600

Data bit (B): 8

Parity bit: None

Stop bit (S): 1

Flow control mode: None

In V200R005C30 or a later version, the system will prompt you to enter the default password.

Username:admin

Password:

Info:The entered password is the same as the default. You are advised to

change it to ensure security.

For V300R019C00 and later versions, the default user name is admin and the default password is

[email protected].

For the other versions, the default user name is admin and the default password is Admin@huawei.

NOTE

For V300R019C00 and later versions, the default user name is admin and the default password is

[email protected].

For the other versions, the default user name is admin and the default password is Admin@huawei.

Altri manuali per AR100 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Huawei Router di rete

Huawei

Huawei B311s-220 Manuale utente

Huawei

Huawei B525 Manuale utente

Huawei

Huawei HG232f Manuale utente

Huawei

Huawei AR3200 Series Manuale utente

Huawei

Huawei AR1200 Series Manuale utente

Huawei

Huawei Quidway S9300 Manuale utente

Huawei

Huawei AR1200 Series Guida

Huawei

Huawei EG8247Q Manuale utente

Huawei

Huawei S3700 Series Manuale utente

Huawei

Huawei quidway s7700 Manuale utente

Huawei

Huawei A280 Manuale utente

Huawei

Huawei AR1200 Series Manuale utente

Huawei

Huawei E5785-320a Manuale utente

Huawei

Huawei EchoLife HG8247H Guida all'installazione

Huawei

Huawei Aolynk VDR824 Manuale utente

Huawei

Huawei Quidway S9300 Manuale utente

Huawei

Huawei Quidway NetEngine80E Manuale utente

Huawei

Huawei AR530 Series Manuale utente

Huawei

Huawei LTE CPE B593 Manuale utente

Huawei

Huawei DN8245V-50 Manuale utente

Huawei

Huawei 31010GAS Manuale utente

Huawei

Huawei AR530 Series Manuale utente

Huawei

Huawei WS5200 Manuale utente

Huawei

Huawei E5573 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza