Huawei B310 LTE CPE Manuale utente

B310 LTE CPE

Quick Start

31506955_01

1Getting to know your B310

Power indicator

On: the B310 is powered on.

Off: the B310 is powered off.

Network mode

indicator

Steady cyan: connected to an LTE network.

Steady blue: connected to a 3G network.

Steady yellow: connected to a 2G network.

Steady green: connected to an Ethernet network.

Steady red:

–The SIM card is not recognized, the PIN has not

been entered, or the PIN verification failed.

–Failed to connect to a mobile network or an

Ethernet network.

Wi-Fi/WPS

indicator

Steady on: Wi-Fi turned on.

Blinking: a WPS connection is being set up.

Off: Wi-Fi turned off.

LAN/WAN

indicator

Steady on: LAN/WAN port is connected to a LAN

device or an Ethernet port.

Blinking: data is being transmitted through the

LAN/WAN port.

Off: LAN/WAN port is not connected to a LAN

device or an Ethernet port.

Signal strength

indicator

On: signal reception available (more bars mean

better reception).

Off: no reception.

SIM card slot

Install a standard SIM card to access the Internet via

an LTE/3G/2G data connection.

External antenna

port

Connect to external antenna after remove the cover.

WPS button

Press and hold for 2 or more seconds until is

blinking to active WPS connection when Wi-Fi is

turned on.

Power button

Press and hold for about 3 seconds to power the B310

on or off.

Reset button

Restoring the default settings of the B310 will erase all

previous settings.

When the B310 is powered on, use a sharply pointed

object to press and hold for about 3 seconds until

indicator is blinking to restore the B310 to its

factory settings. After the factory defaults are

restored, the B310 will restart automatically.

Power port

Connect to compatible power adapter.

LAN/WAN port

Working as a LAN port when connected to a

computer, switch, or other LAN device.

Working as a WAN port when connected to an

Ethernet port on the wall.

Telephone port

Connect to a telephone.

2Installation

Scenario 1: Accessing the Internet using an LTE, 3G, or

2G network

Step 1: Installing the SIM card

1. Slide off the card slot cover.

2. Insert the SIM card into the card slot. Ensure that the beveled edge of the SIM card

aligns with that of the card slot.

3. Close the card slot cover.

Do not remove the SIM card when it is in use. Doing so will affect the performance of

your B310 and data stored on the SIM card may be lost.

Step 2: Connecting cables

Once connected to a power outlet, the B310 automatically powers on.

Power adapter

Computer

Telephone

Laptop, tablet, or smart phone

To prevent interference caused by radio signals, place the B310 at least 1 meter (3.28

feet) away from telephone and other electrical devices.

The B310's power adapter model is HW-120100XYW. X andY represent letters or

numbers that vary by region. For details about the specific adapter model, contact

an authorized dealer.

Do not connect the B310 to the telephone wall outlet (or any Public Switched Telephone

Network), because doing so could damage the B310 due to excessive heat.

Optional: Installing the external antenna

In areas with poor reception, connect external antenna to the B310's external antenna

port to improve signal reception.

1. Power off the B310 and disconnect it from the power outlet.

2. Remove the cover from the antenna port. (Keep it in a safe place.)

3. Screw external antenna fully into the antenna port.

4. Keep external antenna upward to get better signal.

The external antenna is an optional accessory, and may not included in the packaging

box. If required, please contact your local dealer to purchase it.

Before installing the external antenna, ensure that the B310 is powered off and

disconnected from the power outlet.

Only use the external antenna indoors, and do not use it during thunderstorm.

Do not change another unexpected antenna unless manufacturer provide.

To comply with FCC regulations limiting both RF output power and human exposure

to RF radiation, the maximum antenna gain including cable loss in exposure

condition must not exceed 3 dBi in PCS band, 4 dBi in AWS-1 band, 3 dBi in CELL

band, and 4 dBi in LTE band 7.

Scenario 2: Accessing the Internet using Ethernet

Connect the B310 to a wall-mounted Ethernet port or an ADSL modem for Internet

access.

Once connected to a power outlet, the B310 automatically powers on.

Power adapter

Ethernet port on the wall

Telephone

Laptop, tablet, or smart phone

To prevent interference caused by radio signals, place the B310 at least 1 meter (3.28

feet) away from telephone and other electrical devices.

The B310's power adapter model is HW-120100XYW. X andY represent letters or

numbers that vary by region. For details about the specific adapter model, contact

an authorized dealer.

Do not connect the B310 to the telephone wall outlet (or any Public Switched Telephone

Network), because doing so could damage the B310 due to excessive heat.

3Setting up a Wi-Fi connection

Step 1: Enabling Wi-Fi on the B310

When the indicator is steady on, the Wi-Fi function of the B310 is turned on.

Step 2: Recording the SSID and Wi-Fi key

The default SSID and Wi-Fi key are printed on the B310's bottom label.

Step 3: Setting up a Wi-Fi connection on your client

Method 1: Setting up a Wi-Fi connection manually

1. From your Wi-Fi enabled client, scan for wireless networks in your area.

2. Connect to the network name that matches the SSID found on the device label.

3. When prompted for password, enter the Wi-Fi Key found on the device label. (The

Wi-Fi key is case sensitive.) Your client will notify you when it is connected.

Make sure your client (computer, tablet, or smart phone) also supports Wi-Fi.

For details about how to manually enable or disable the Wi-Fi function, refer to the

WLAN settings section of the help information on the web management page.

To prevent unauthorized parties from accessing your Wi-Fi network, it is recommended

that you change the SSID and Wi-Fi key from time to time. For details, see the help

information on the web management page.

Altri manuali per B310 LTE CPE

Indice

Altri manuali Huawei Router di rete

Huawei

Huawei ADSL2+Broadband Router Aolynk DR814 Manuale utente

Huawei

Huawei AR1200 Series Manuale utente

Huawei

Huawei OptiXstar B671G Manuale utente

Huawei

Huawei AR200-S Series Manuale utente

Huawei

Huawei OptiX PTN Series Manuale utente

Huawei

Huawei AR1200-S Series Guida

Huawei

Huawei NetEngine5000E Manuale utente

Huawei

Huawei HG659 Manuale utente

Huawei

Huawei CX210 Guida di riferimento rapido

Huawei

Huawei Enterprise S2700 Series Manuale utente

Huawei

Huawei RRU3808 Manuale utente

Huawei

Huawei A280 Manuale utente

Huawei

Huawei DN8245V-50 Manuale utente

Huawei

Huawei E586BS-6 Manuale utente

Huawei

Huawei E5170s-22 Manuale utente

Huawei

Huawei Quidway NetEngine80E Manuale utente

Huawei

Huawei WA1003A-RU Manuale utente

Huawei

Huawei AR2200 Series Manuale utente

Huawei

Huawei H112-370 Manuale utente

Huawei

Huawei Quidway R2600 Series Manuale utente

Huawei

Huawei B2368 Manuale utente

Huawei

Huawei B612s-25d Specifiche tecniche

Huawei

Huawei SmartAX MT800 Manuale utente

Huawei

Huawei 31010GAS Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza