Huawei ETS1160 Manuale utente

Notice

1No part of this document may be reproduced or

transmitted in any form or by any means without

prior written consent of Huawei Technologies

Co., Ltd.

2The product described in this manual may

include copyrighted software of Huawei Technol-

ogies Co., Ltd and possible licensors. Customers

shall not in any manner reproduce, distribute,

modify, decompile, disassemble, decrypt,

extract, reverse engineer, lease, assign, or subli-

cense the said software, unless such restrictions

are prohibited by applicable laws or such actions

are approved by respective copyright holders

under licenses.

Trademarks and Permissions

4HUAWEI, and are trademarks or

registered trademarks of Huawei Technologies

Co., Ltd.

5Other trademarks, product, service and

company names mentioned are the property of

their respective owners.

Notice

7Some features of the product and its accessories

described herein rely on the software installed,

capacities and settings of local network, and

may not be activated or may be limited by local

network operators or network service providers,

thus the descriptions herein may not exactly

match the product or its accessories you pur-

chase.

8Huawei Technologies Co., Ltd reserves the right

to change or modify any information or specifica-

tions contained in this manual without prior

notice or obligation.

NO WARRANTY

10 THE CONTENTS OF THIS MANUAL ARE PRO-

VIDED “AS IS”. EXCEPT AS REQUIRED BY

APPLICABLE LAWS, NO WARRANTIES OF

ANY KIND, EITHER EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABIL-

ITY AND FITNESS FOR A PARTICULAR PUR-

POSE, ARE MADE IN RELATION TO THE

ACCURACY, RELIABILITY OR CONTENTS OF

THIS MANUAL.

11 TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, IN NO CASE SHALL HUA-

WEI TECHNOLOGIES CO., LTD BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, INDIRECT,

OR CONSEQUENTIAL DAMAGES, OR LOST

PROFITS, BUSINESS, REVENUE, DATA,

GOODWILL OR ANTICIPATED SAVINGS.

Import and Export Regulations

12 Customers shall comply with all applicable

export or import laws and regulations and will

obtain all necessary governmental permits and

licenses in order to export, re-export or import

the product mentioned in this manual including

the software and technical data therein.

Table of Contents 1

Introduction 1

Packing List................................................1

Front View..................................................1

Rear View...................................................2

Installation 3

Installing the Battery...................................3

Installing the SIM/USIM Card.....................3

Installing the Power Adapter ......................4

Installing the Antenna.................................4

Connecting the Terminal............................4

Viewing the Signal Strength.......................5

Mounting the FWT......................................6

General Functions 7

Booting the FWT ........................................7

Making or Answering Calls.........................7

Adjusting the Voice Volume .......................7

Advanced Functions 9

Supplementary Services ............................9

Wireless Data Service................................9

Security ....................................................10

Troubleshooting 11

Warnings and Precautions 12

1Table of Contents

1Introduction

Packing List

Note

To access the Internet, you need to purchase

the required data suite. For more information,

please consult your local sales agent.

Front View

Note

The figures are only for your reference, please

refer color and shape to product.

The main ports on the host are described as follows:

The LEDs on the host are described as follows:

Item Quantity

FWT (Fixed Wireless Terminal) host 1

Power adapter 1

Phone cable 1

Battery (Rechargeable) 1

Certificate of Quality 1

User Guide 1

Antenna(Optional) 1

NO. Item

1FWT switch

2Telephone port 1

3Telephone port 2

4Data port

5DC input

6Antenna port

Rear View

NO. Item

7Signal strength indicator: L2

8Signal strength indicator: L1

9Battery indicator

Steady on and in red: The battery is fully

electricity or fully charged.

Fast blinking in red: The battery needs

to be recharged.

Slow blinking in red: The battery is being

charged.

10 Power indicator

Steady on and in blue: The FWT is con-

nected with the power adapter.

11 Network mode

Double blinking in blue: searching the

network.

Blinking in blue: registering with the 2G

network.

Steady on and in blue: registering with

the 3G network.

No. Item

1Wall-mounting brackets

2SIM/USIM card slot

3Battery container

4Battery port

5Battery container cover

2Installation

Note

Before installing or removing the battery,

antenna, or SIM/USIM card, you need to swich

off the FWT and disconnect the FWT from the

power adapter.

Installing the Battery

Note

• When the ambient temperature exceeds the

temparature allowed for charging, the system

will stop charging the battery.

• When the power adapter is in use, the FWT

will automatically charge the battery and stop

charging when the battery is fully charged.

• Remove the battery if the FWT is left unused

for a long period.

• Make sure that the battery has been charged

for more than 8 hours before it supplies

power for the FWT at the first time. The

charging time depends on the environmental

temperature and battery life.

Insert the connection cable of the battery into the bat-

tery port (make sure the battery is correctly inserted),

and then seat the battery in the battery container.

Installing the SIM/USIM Card

Note

• Consult the local agent to determine whether

to install the SIM/USIM card or not.

•TheSIM/USIM card and contact point are vul-

nerable to damage such as scarring or bend-

ing, so you need to insert or remove it with

care.

Insert the card into the card slot. Put the side with a

corner cutting backwards and the side with a golden

contact downwards. Make sure the card is completely

inserted into the slot.

Installing the Power Adapter

In normal conditions, the FWT relies on the external

power adapter for power supply.

1Insert one end of the power adapter into the DC

input port, and the other end into the power sup-

ply jack.

2If the power indicator is in blue, the connection

is correct.

Use the battery only in the case that the electricity

has failed or the external power adapter is unavail-

able. You must make sure that the battery has been

fully charged before putting it into use.

Installing the Antenna

1Make sure that the FWT is switchedoff.

2Align the antenna with the antenna port on the

FWT host in the direction shown in the figure,

and then screw the antenna, ensuring that the

connection is secure.

Connecting the Terminal

Note

• Switch off the FWT and disconnect the power

adapter.

• Use the cable provided by the manufacturer.

Viewing the Signal Strength

Connecting the FWT to a Telephone

The FWT provides two telephone ports. They are in

parallel connection and use the same number.

Note

To avoid the call effect from interfering by the

wireless signal, place the telephone one meter

away from the FWT

Connecting the FWT to a PC

After purchasing the data service suite, you can use

data services by connecting the FWT to a PC, and

maintain the FWT on the PC. For details, consult

your local agent.

Viewing the Signal Strength

Power on the FWT and wait until some signal

strength indicators are on or until you can hear the

dial tone.

• If all signal strength indicators remain off for 5 minutes

and only the fault tone is heard. No signals can be

received.

• Turn the antenna but all signal LEDs still keep off. The

signal quality is very poor. If the dial tone can be heard

in some area, position the antenna towards it.

Indicators Signal Level Signal Strength

L1 and L2

remain off 0No signal

Mounting the FWT

The required signal strength is level 1 or above.

Note

• If the L2 is fast blinking in blue, it indicates

that the SIM/USIM card is not in place, the

SIM/USIM card is faulty, the PIN code is

locked, or the PIN code is not entered.

• If the signal strength is in level 1 or 3, the sig-

nal strength indicators of level 1 or 3 should

be on for 80 percent of the time.

Mounting the FWT

Horizontal Mounting

Place the FWT on a smooth surface with cool air and

good ventilation. Keep the FWT away from other

objects around for at least 10 cm.

Vertical Mounting

Fix wall screws into the wall with the screw heads

extending approximately 3 mm from the surface of

the wall, align the mounting brackets with the screws,

push the host towards the wall, and mate the brack-

ets with the screws, ensuring the host is stable.

L1 is steady on

and in blue 1Weak

L2 is steady on

and in blue 3Medium

L1 and L2 are

steady on and in

blue

5Strong

Indicators Signal Level Signal Strength

3General Functions

Booting the FWT

The boot process of the FWT will last about 20 sec-

onds. Then you can view the signal strength.

Note

If the signal strength indicators remain off, the

FWT may be faulty or not in coverage area.

Please consult the local agent.

Making or Answering Calls

1Before off-hook, make sure at least one signal

strength LED is on.

2Dial the number in either of the following ways:

• Dial a telephone number in a regular way, and the

number will be dialed out in several seconds.

• Dial all the digits of the number plus one #. The

FWT will immediately dial the number.

3Make sure to hook on the telephone in place, so

that you can receive calls.

Adjusting the Voice Volume

You can adjust the voice volume either when the tele-

phone is in standby mode or working mode. Four vol-

ume levels are available, with level 1 being the lowest

and level 4 the highest.

Adjusting the Volume in Standby

Mode

1Hook off and you can hear the dial tone, which

means the telephone service is available.

2Press #*1 to adjust the volume.

3Press keys from 1 to 4 to select the desired vol-

umn. The keys from 1 to 4 represents volumn

level from 1 to 4.

4After selecting the desired volume, press * key

to save it. If you hear the confirmation tone of a

"toot", you have successfully set the volume

level.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Huawei Terminale touch

Huawei

Huawei EchoLife HG8240 Manuale utente

Huawei

Huawei ETS2558 Manuale utente

Huawei

Huawei FP222A Manuale utente

Huawei

Huawei EG8040 Series Manuale utente

Huawei

Huawei EchoLife HG8110 Manuale utente

Huawei

Huawei ViewPoint 9000 Series Manuale utente

Huawei

Huawei ETS2059 Manuale utente

Huawei

Huawei ETS3053 Manuale utente

Huawei

Huawei EP720 Manuale utente

Huawei

Huawei ETS2225 Manuale utente

Huawei

Huawei ETS2555 Manuale utente

Huawei

Huawei Capetune ETS5623 Manuale utente

Huawei

Huawei ETS2256 Manuale utente

Huawei

Huawei EchoLife HG8245 Specifiche tecniche

Huawei

Huawei ETS2258 Manuale utente

Huawei

Huawei B160 Manuale utente

Huawei

Huawei HG8120 series Manuale utente

Huawei

Huawei ETS2551 Manuale utente

Huawei

Huawei HG8120 series Manuale utente

Huawei

Huawei ETS2252+ Manuale utente

Huawei

Huawei B160 Manuale utente

Huawei

Huawei OptiXstar HG8145X6 Manuale utente

Huawei

Huawei ETS2028 Manuale utente

Huawei

Huawei EchoLife HG8240 Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente