Humanscale QUICKSTAND LITE Manuale utente

humanscale.com 800.400.0625Humanscale Corporate HQ 1114 Ave. of the Americas, 15th Floor New York, NY 10036

QUICKSTAND LITE REWORK INSTRUCTIONS

OVERVIEW/BACKGROUND

Below are step-by-step instructions to rework your QuickStand Lite. If you have

any questions, contact Humanscale Support at QSLinquiry@humanscale.com

or 855-319-0315.

DIFFICULTY

Intermediate

REWORK TIME

25 Minutes

Item

Number Description Quantity

Included

1 M8 Long Dynamic Arm 1

2Plastic Link Washer 1

3 Arm Link Pin 1

4 4 mm Set Screw 1

5 Arm Link Pin Collar 1

6Spherical Washer 1

710 mm Washer 1

8Lock Washer 1

9 Shoulder Bolt 1

10 2 mm Allen Key 1

11 2.5 mm Allen Key 1

12 5 mm Allen Key 1

REWORK KIT CONTENTS

REQUIRED TOOLS

M2 / M2.5 / M5 Allen Keys (provided)

Torque wrench w/ M5 Hex socket (recommended)

MATERIAL DISPOSITION

Leftover parts should be recycled locally if possible.

QUICKSTAND LITE REWORK INSTRUCTIONS

1Find a safe place to store monitors, mice and any other peripherals that may be installed on the

QuickStand Lite (QSL).

2Check if keyboard and mouse are hardwired. If so, trace cables back to computer port or dock. Label

cables carefully to prevent errors when reinstalling. Unplug cables and snake wires back through M8 long

dynamic arm (“dynamic arm”) cable channel. Remove plastic cover from QSL head and remove wires

to free keyboard and mouse and set them aside. Remove any additional items that are on the keyboard

platform. Raise QSL to highest position to remove monitors. WARNING: DO NOT REMOVE THE

MONITORS UNLESS THE QSL IS IN THE HIGHEST POSITION. Remove the monitors, one at a time

and stow them in a safe place.

3Free the QSL head by completely removing the 2.5 mm allen screw on front end of the dynamic arm to

free the arm link pin.

Set screw to

be removed

4With the dynamic arm in the fully upright position, lift the QSL head straight up so that the arm link pin

comes completely out of the socket on the end of the dynamic arm. Carefully put the QSL head with

the keyboard platform and crossbar (if included) onto the work surface/desk. Set aside the plastic link

washer to be reused in step #14. Remove plastic cover. (Plastic cover may have already been removed

in step 2.)

QUICKSTAND LITE REWORK INSTRUCTIONS

5Using the 5mm hex key, loosen the cap screw that passes through the release lever and attaches the

QSL head to the arm link pin. You may have to hold the arm link pin, from below the QSL head, with your

free hand so it does not turn as you loosen the bolt.

Hold lower

arm link pin

while removing

cap screw

Cap screw

6Continue loosening this screw until it can be removed from the unit. Remove the cap screw with the

release lever, and all washers that the screw passes through. Remove the arm link pin, which will be

replaced in the upgrade process. QSL head assembly is now resting on the work surface ready to be

reassembled with the replacement parts.

7Dispose/recycle all parts all parts except dome washer. Items to be discarded are as follows:

• Shoulder bolt

• Lever washer

• Cam pin

• Lever

• Rectangular cam fulcrum

• Rectangular ring

• Spherical washer

• Arm link pin collar

• Arm link pin

Retain aluminum

dome washer

QUICKSTAND LITE REWORK INSTRUCTIONS

8Replacement parts ready to be installed:

• Lock washer (8)

• 10 mm washer (7)

• Spherical washer (6)

• Shoulder bolt (9)

• Arm link pin (3)

• Arm link pin collar (5)

• Aluminum dome washer (retained for reuse)

Place lock washer, 10mm washer and spherical washer onto shoulder bolt. Place arm link pin with

collar and dome washer seated in the collar under the QSL head as shown. Insert shoulder bolt, with

assembled washers, through hole in QSL head and into arm link pin.

Aluminum

dome

washer

Arm link

pin and collar

Lock, 10 mm

and spherical

washer on

shoulder bolt

10 Remove the cable cover from the rear of the base by sliding it up vertically and set it aside.

11 Remove 2.5 mm allen screw.

9Tighten the bolt with the 5mm hex key. Bolt should be ﬁrm with a little bit of give. If the arm link pin

rotates as you tighten the shoulder bolt, hold it steady with your free hand.

To be fully

tightened at

a later step

QUICKSTAND LITE REWORK INSTRUCTIONS

13 Install the new M8 Long Dynamic arm, making sure the plastic washer stays on the dynamic arm link

pin as it slides into the QSL base socket.

14 Reinstall QSL head, making sure that the plastic link washer stays in place on the link pin as it

is inserted into the dynamic arm socket. Re-tighten set screws on either end of the dynamic

arm. Position the QSL keyboard platform on a ﬂat desk or work surface.

12 Carefully remove the dynamic arm by lifting straight up, allowing the arm link pin to come

clear out of the base socket. Existing arm may be disposed/recycled locally.

QUICKSTAND LITE REWORK INSTRUCTIONS

15 Loosen 5mm shoulder bolt one half turn, or just until platform can be easily positioned so that it is lying

ﬂat on a ﬂat surface such as the desk or table.

After shoulder

screw loosened,

platform leveled

on table top

16 Once the platform is lying ﬂat in the desired position, tighten the bolt as tight as possible with 5mm Allen

Key. If available, use a torque wrench and tighten to 15 ft. lbs.

Use free hand to

hold arm link pin

in place

QSL platform leveled

with bolt fully tightened

Leveled platform ready for

re-installation of monitors

Platform out

of level

QUICKSTAND LITE REWORK INSTRUCTIONS

17 Reinstall the monitor(s) and adjust the monitor arm tension to balance the monitor(s). Using the 5mm

hex key, turn the tension screw clockwise to increase lift of arm and reduce tension. Turn screw

counterclockwise to reduce lift and add tension. QSL with monitors and keyboard on platform should stay

in position without sinking down or rising up when tension is properly adjusted.

19 Replace all cables and plastic covers as they were before.

Cover on dynamic arm

popped off to access

tensioning screw

QUICKSTAND LITE REWORK INSTRUCTIONS

Indice

Altri manuali Humanscale Rack e supporto

Humanscale

Humanscale V/Flex Manuale utente

Humanscale

Humanscale Quickstand Manuale utente

Humanscale

Humanscale UFEA Manuale utente

Humanscale

Humanscale CPU 450 Manuale utente

Humanscale

Humanscale Thin Client Holder Manuale utente

Humanscale

Humanscale M2.1 Manuale utente

Humanscale

Humanscale M/FLEX Manuale utente

Humanscale

Humanscale QuickStand Eco Manuale utente

Humanscale

Humanscale Thin Client Holder Manuale utente

Humanscale

Humanscale QuickStand Under Desk Manuale utente

Humanscale

Humanscale M10 Manuale utente

Humanscale

Humanscale M8.1 Manuale utente

Humanscale

Humanscale V6 Wallstation Istruzioni per l'installazione

Humanscale

Humanscale M/Connect 2 MC2-AXY Manuale utente

Humanscale

Humanscale V6 Manuale utente

Humanscale

Humanscale M10 Manuale

Humanscale

Humanscale QuickStand Eco Manuale utente

Humanscale

Humanscale QuickStand Eco Manuale utente

Humanscale

Humanscale M/Connect 2 Manuale utente

Humanscale

Humanscale M2.1 Manuale utente

Humanscale

Humanscale M2.1 Manuale utente

Humanscale

Humanscale M/FLEX Manuale utente

Humanscale

Humanscale HSIKB0417 Manuale utente

Humanscale

Humanscale M/Connect 2 Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente