Humanscale Quickstand Manuale utente

INSTALLATION INSTRUCTIONS

Freestanding Base

PARTS REQUIRED

A (1) QuickStand Unit

B (2) Leg-Covers

C (1) Stopper

D (1) Leg

E (1) Base

F (1) Spacer

G (1) Platform (work surface)

H (8) M6 x 9.5 mm Flat Head Machine Screws

I (6) M8 x 18 mm Flat Head Machine Screws

J (2) M8 x 14 mm Button Head Machine Screws

4 mm Hex Key (supplied)

5 mm Hex Key (supplied)

6 mm Hex Key (supplied)

Hardware

Tools Required

Read all instructions carefully before installing this product or attempting to use it

This product contains a loaded mechanism that is under tension. Do not attempt to

remove or alter any part of this product or in any way modify or tamper with any

component of this product other than as set forth in these instructions. Failure to

comply with the instructions provided may result in property damage or serious injury.

Do not remove bracing box attached to QuickStand unit until your QuickStand is

fully assembled

WARNING

STEP 1

Assemble Post

Tools: 5 mm Hex Key

• Place the base on the desk and remove the leg (ﬁg A)

by unscrewing the two screws and set them aside

for use in step 6.

• Place the QuickStand post

on the desk laying on its back.

• Carefully remove the shipping plate (ﬁg B)

and set aside the (2) M8 x 10 mm Cap

Head Machine Screws and the

Washers for Step 4.

IMPORTANT: DO NOT

REMOVE BRACE BOX!

STEP 2

Install Leg

Tools: 5 mm Hex Key

• Secure the leg in place using

(6) M8 x 18 mm Flat Head Machine Screws

(ﬁg. C)

• Attach stopper using (2)

M8 x 14 mm Button Head Machine Screws (ﬁg D)

and make sure the edge is parallel with the base

STEP 3

Attach Platform

Tools: 6 mm Hex Key

• Ensure the Platform is parallel and equally spaced

from the leg on either side (ﬁg. E)

• Using the (2) M8 x 10 mm Cap Head Machine

Screws and the Washers from step 1, secure

the Platform to the QuickStand unit

C D

STEP 4

Attaching Spacer Under the Platform

• Peel back paper to expose adhesive and press the spacer

ﬁrmly into place on the underside of the Platform

centered and parallel to the pads (ﬁg. F)

Leg

Platform

www.humanscale.com

HSFBI1015

Customer Service: N America +1 800 400 0625 / International +353 (0)1 858 0910

STEP 6

Attach Leg to Base

Tools: 4 mm Hex Key

• Secure the legs to base using (8)

M6 x 9.5 mm Flat Head Machine Screws (ﬁg. I)

• Attach the plastic leg-covers by pressing ﬁrmly

down until they each click into place (ﬁg J)

• Position the unit so the front edge of the

work surface aligns with the front edge of

the desk when in the low position (ﬁg K)

Proceed to the Monitor Installation steps in the main QuickStand Assembly Instructions

STEP 5

Attaching QuickStand to the Base

IMPORTANT: Your QuickStand unit is heavy. If needed, please

have assistance when lifting.

• Carefully lift your QuickStand unit from its horizontal position

to its vertical position (ﬁg. G)

• Once your QuickStand is sitting upright on the base slide it

back so the stopper hooks into base (ﬁg H)

Altri manuali per Quickstand

Indice

Altri manuali Humanscale Rack e supporto

Humanscale

Humanscale Thin Client Holder Manuale utente

Humanscale

Humanscale V/Flex Manuale utente

Humanscale

Humanscale M10 Manuale

Humanscale

Humanscale M7 Manuale utente

Humanscale

Humanscale Quickstand Manuale utente

Humanscale

Humanscale HSIKB0417 Manuale utente

Humanscale

Humanscale V6 Manuale utente

Humanscale

Humanscale M/FLEX Manuale utente

Humanscale

Humanscale QuickStand Eco Manuale utente

Humanscale

Humanscale M10 Manuale utente

Humanscale

Humanscale M/Connect 2 Manuale utente

Humanscale

Humanscale M/Connect 2 MC2-AXY Manuale utente

Humanscale

Humanscale QUICKSTAND LITE Manuale utente

Humanscale

Humanscale M/Connect 2 Manuale utente

Humanscale

Humanscale Mesh Guida alla configurazione

Humanscale

Humanscale M8.1 Manuale utente

Humanscale

Humanscale M2.1 Manuale utente

Humanscale

Humanscale M/FLEX Manuale utente

Humanscale

Humanscale QuickStand Under Desk Manuale utente

Humanscale

Humanscale M2.1 Manuale utente

Humanscale

Humanscale QuickStand Eco Manuale utente

Humanscale

Humanscale M/FLEX Manuale utente

Humanscale

Humanscale QuickStand Eco Manuale utente

Humanscale

Humanscale UFEA Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente