Humanscale UFEA Manuale utente
Assembly Instructions
North America: +1 800 400 0625
Europe: +353 (0)1 858 0910
Asia Pacic: +8522581 0570
Universal Front End Adjuster
2
DESIGNING
HEALTHIER
WORKPLACES
3
Parts Included
VESA Bracket 2.5mm Hex Key
(4) Standard VESA Screws (4) Plastic Spacers
(4) Extended VESA Screws
VESA Bracket
Mounting Points
Track Assembly
(Back View)
Track Assembly
(Front View)
Track
Carriage Plate
Spring Switches
Standard Tilt Kit Fixed Mount Kit Legacy Tilt Kit
Standard Tilt Adapter
(4) M4 x 6mm
Flat Head Screws
Adapter Plate
(4) M4 x 8mm
Flat Head Screws
4mm Hex Key
(3) M6 x 12mm
Flat Head Screws
Legacy Adapter
(5) M4 x 6mm
Flat Head Screws
4
Fig. 4Fig. 3
Fig. 2
Using the 2.5 mm hex key, install the (4) M4 × 6mm at head machine
screws to attach the Standard Tilt Adapter to the UFEA. (Fig. 2)
Position the Adapter on the Carriage Plate so that the indicator is visible
and pointing up.
Using the 2.5 mm hex key, install the (4) M4 × 8 mm flat head screws to
attach the Fixed Mount Adapter to the UFEA. (Fig. 4)
Assembly Instructions
Attach Adapter to the Universal Front End Adjuster (UFEA)
Standard Tilt Adapter
Fixed Mount Adapter
1
1
2
2
3
Align the 4 screw holes on the Adapter (Fig. 1) with the 4 uppermost
mounting points on the Carriage Plate.
Using the 4 mm hex key, install the (3) M6 × 12 mm at head screws
to attach the Fixed Mount to the Adapter Plate. (Fig. 3)
Fig. 1 - Screw hole pattern.
5
Fig. 5
Using the 2.5 mm hex key, install the (5) M4 × 6 mm at head machine
screws to attach the Legacy Tilt Adapter to the UFEA. (Fig. 5)
Use a Phillips screwdriver to install the provided VESA screws to attach the
VESA bracket to the monitor.
The VESA bracket features a 75 mm and 100 mm hole pattern.
You may also use the VESA screws provided with the monitor.
Attach VESA Bracket to Monitor
Legacy Tilt Adapter
1
1
2
2
Align the 5 screw holes on the Adapter with the 5 mounting points
on the Carriage plate.
Position the VESA bracket over the mounting points on the back of
the monitor.
Fig. 6
6
Several rows of keyhole-shaped mounting points allow you to tailor the position of your monitor
relative to the range of motion. Position 3 is a neutral position well suited to most applications.
Position 1
+ 8" (205 mm)
– 1" (25 mm)
Position 2
+ 6.5" (165 mm)
– 2.5" (65 mm)
Position 3
+ 5" (130 mm)
– 4" (100 mm)
Recommended
Position 4
+ 3.5" (90 mm)
– 5.5" (140 mm)
9" (230 mm)
Fig. 8
Fig. 7
Insert the screw heads into the keyhole and slide the UFEA track so the
screw heads seat in the narrower end of the keyhole. (Fig. 7)
Using the 2.5 mm hex key, tighten the 4 screws on the VESA bracket.
Attach UFEA to Monitor
1
2
3
Align the 4 screws on the VESA bracket with the appropriate
keyhole-shaped mounting points. (See Fig. 8)
7
The Universal Front End Adjuster (UFEA) supports monitors up to 30 lbs (13.6 kg). Refer to your
monitor's specications to nd the weight, then follow the instructions below.
No additional force is required.
Do not press any switches.
With the monitor raised all the way,
press switches 1 and 2 in sequence
until they click.
With the monitor raised all the way,
press switch 1 until it clicks.
With the monitor raised all the way,
Press switches 1, 2, and 3 in sequence
until they click.
NOTE: While the UFEA supports monitors up to 30 lbs (13.6 kg), your monitor arm may not. Never
exceed the weight capacities listed for your specic monitor arm model.
Calibrate the UFEA
Less than 7 lbs (3.2 kg)
14-21 lbs (6.4 - 9.5 kg)
7-14 lbs (3.2 - 6.4 kg)
21-30 lbs (9.5 - 13.6 kg)
8
NOTE: If needed, tighten
the Tension Screw (A) to
hold the monitor in position.
A
B
C
Push the bottom of the monitor back until the Quick Release Tab (B) on the arm
snaps into position. (Fig. 10) Ensure that the tab has fully engaged before continuing.
To remove, press the release button and lift upwards.
To remove the monitor, lift the Quick Release Tab and pull the bottom of the
monitor away from the arm, then lift free of the hook.
1
1
2
2
3
Hold the monitor at an angle and lower it onto the arm. Fit the hook at
the top of the arm into the D-shaped cutout in the Adapter. (Fig. 9)
Insert the stem of the Fixed Mount into the end of the arm until
the release button (C) locks in place. (Fig. 11)
Attach to Monitor Arm
Standard Tilt
Fixed Mount
Fig. 9 Fig. 10
Fig. 11
9
D
To remove, pull Quick Release Tab away from the UFEA
and slide the monitor up and away from the arm.
1
2
Slide the Adapter into the arm mount until the
Quick Release Tab (D) clicks. (Fig.12)
Legacy Tilt
Fig. 12
10
Adjustments and Troubleshooting
Your monitor should move up and down easily and stay in position.
If the monitor sinks from the desired position, or is hard to lift, you should INCREASE
the counterbalance force.
If the monitor lifts from the desired position you should DECREASE the
counterbalance force.
Raise the monitor all the way and select the next switch in
numerical order. Press it all the way until it clicks. Test the
adjustments by moving the monitor up and down a few times.
Repeat if necessary.
Raise the monitor all the way and select the highest number
switch currently engaged. Pull to release the switch. Test
the adjustments by moving the monitor up and down a few
times. Repeat if necessary.
If the switches do not engage or disengage properly, try
removing the monitor and UFEA from the arm before
making the adjustments.
Difcult to raise monitor or the monitor sinks
from desired position.
Difcult to lower monitor or the monitor lifts
from desired position.
Indice
Altri manuali Humanscale Rack e supporto
Humanscale
Humanscale Quickstand Manuale utente
Humanscale
Humanscale M/FLEX Manuale utente
Humanscale
Humanscale M/FLEX Manuale utente
Humanscale
Humanscale M2.1 Manuale utente
Humanscale
Humanscale M2.1 Manuale utente
Humanscale
Humanscale CPU 450 Manuale utente
Humanscale
Humanscale V/Flex Manuale utente
Humanscale
Humanscale V6 Manuale utente
Humanscale
Humanscale M10 Manuale
Humanscale
Humanscale V6 Wallstation Istruzioni per l'installazione
Humanscale
Humanscale Quickstand Manuale utente
Humanscale
Humanscale Thin Client Holder Manuale utente
Humanscale
Humanscale M/Connect 2 Manuale utente
Humanscale
Humanscale QuickStand Eco Manuale utente
Humanscale
Humanscale M7 Manuale utente
Humanscale
Humanscale HSIKB0417 Manuale utente
Humanscale
Humanscale Quickstand Manuale utente
Humanscale
Humanscale Mesh Guida alla configurazione
Humanscale
Humanscale Thin Client Holder Manuale utente
Humanscale
Humanscale Quick Stand Lite Manuale utente
