Hypertherm Powermax 125 Manuale di riferimento

Torch Alignment Guide for Bevel Cutting

Powermax125®and MAXPRO200™

Field Service Bulletin

811280

Revision 0

January 2021

Hypertherm Europe B.V.

Vaartveld 9, 4704 SE

Roosendaal, Nederland

31 165 596907 Tel

31 165 596901 Fax

31 165 596908 Tel (Marketing)

31 (0) 165 596900 Tel (Technical Service)

00 800 4973 7843 Tel (Technical Service)

[email protected]

(Technical Service Email)

Hypertherm (Shanghai) Trading Co., Ltd.

B301, 495 ShangZhong Road

Shanghai, 200231

PR China

86-21-80231122 Tel

86-21-80231120 Fax

86-21-80231128 Tel (Technical Service)

[email protected]

(Technical Service Email)

South America & Central America: Hypertherm Brasil Ltda.

Rua Bras Cubas, 231 – Jardim Maia

Guarulhos, SP – Brasil

CEP 07115-030

55 11 2409 2636 Tel

[email protected] (Technical Service Email)

Hypertherm Korea Branch

#3904. APEC-ro 17. Heaundae-gu. Busan.

Korea 48060

82 (0)51 747 0358 Tel

82 (0)51 701 0358 Fax

[email protected] (Marketing Email)

TechSupportAP[email protected]

(Technical Service Email)

Hypertherm Pty Limited

GPO Box 4836

Sydney NSW 2001, Australia

61 (0) 437 606 995 Tel

61 7 3219 9010 Fax

[email protected] (Main Office Email)

TechSupportAP[email protected]

(Technical Service Email)

Hypertherm (India) Thermal Cutting Pvt. Ltd

A-18 / B-1 Extension,

Mohan Co-Operative Industrial Estate,

Mathura Road, New Delhi 110044, India

91-11-40521201/ 2/ 3 Tel

91-11 40521204 Fax

HTIndia.info@hypertherm.com (Main Office Email)

TechSupportAP[email protected]

(Technical Service Email)

Hypertherm, Inc.

Etna Road, P.O. Box 5010

Hanover, NH 03755 USA

603-643-3441 Tel (Main Office)

603-643-5352 Fax (All Departments)

[email protected] (Main Office Email)

800-643-9878 Tel (Technical Service)

[email protected] (Technical Service Email)

800-737-2978 Tel (Customer Service)

customer.service@hypertherm.com (Customer Service Email)

866-643-7711 Tel (Return Materials Authorization)

877-371-2876 Fax (Return Materials Authorization)

[email protected] (RMA email)

Hypertherm México, S.A. de C.V.

Avenida Toluca No. 444, Anexo 1,

Colonia Olivar de los Padres

Delegación Álvaro Obregón

México, D.F. C.P. 01780

52 55 5681 8109 Tel

52 55 5683 2127 Fax

Soporte.Tecnico@hypertherm.com (Technical Service Email)

Hypertherm Plasmatechnik GmbH

Sophie-Scholl-Platz 5

63452 Hanau

Germany

00 800 33 24 97 37 Tel

00 800 49 73 73 29 Fax

31 (0) 165 596900 Tel (Technical Service)

00 800 4973 7843 Tel (Technical Service)

[email protected] (Technical Service Email)

Hypertherm (Singapore) Pte Ltd.

82 Genting Lane

Media Centre

Annexe Block #A01-01

Singapore 349567, Republic of Singapore

65 6841 2489 Tel

65 6841 2490 Fax

[email protected] (Marketing Email)

TechSupportAP[email protected] (Technical Service Email)

Hypertherm Japan Ltd.

Level 9, Edobori Center Building

2-1-1 Edobori, Nishi-ku

Osaka 550-0002 Japan

81 6 6225 1183 Tel

81 6 6225 1184 Fax

HTJapan.info@hypertherm.com (Main Office Email)

T[email protected] (Technical Service Email)

Powermax, MAXPRO200, and Hypertherm are trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the

property of their respective holders.

Environmental stewardship is one of Hypertherm’s core values. www.hypertherm.com/environment

100% Associate-owned

Torch Alignment Guide for Bevel Cutting

Powermax125 / MAXPRO200 Field Service Bulletin 811280 3

Introduction

Purpose

This Field Service Bulletin shows how to use the Hypertherm torch alignment guide accessory to do

bevel cutting on a track burner with a Powermax125 or a MAXPRO200.

Tools and materials needed

3/16 inch hexagonal key wrench

Digital level, or digital level application on a smartphone

Remote start pendant for the plasma cutting system if the track burner cannot start and stop

the plasma torch

Kit 528077 contents

Kit 528077 contains only the torch alignment guide and this Field Service Bulletin. Refer to

Figure 1.

WARNING

ELECTRIC SHOCK CAN KILL

Disconnect electrical power before doing installation or maintenance.

The line-disconnect switch must REMAIN in the OFF position until all

installation or maintenance steps are complete.

See the Safety and Compliance Manual (80669C) for more safety

information.

WARNING

EXPLOSION HAZARD – CUTTING WITH FLAMMABLE OR OXIDIZING GASES

Do not use flammable or oxidizing gases with Powermax systems. These gases can cause

explosive conditions during plasma cutting operations.

An example of an oxidizing gas is oxygen. Examples of flammable gases are acetylene,

propylene, methane, and pure hydrogen. Refer to the Safety and Compliance Manual

(80669C) for more information.

Torch Alignment Guide for Bevel Cutting

4811280 Field Service Bulletin Powermax125 / MAXPRO200

Figure 1 – Torch alignment guide

1Metric units (cm/mm)

2Torch clearance gauge for Air/Air processes

3Set screw

4English units (inches)

5Torch clearance gauge for O2/Air processes

(MAXPRO200 only)

Torch Alignment Guide for Bevel Cutting

Powermax125 / MAXPRO200 Field Service Bulletin 811280 5

Assemble the torch alignment guide

Before you use the torch alignment guide, attach the vertical piece to the horizontal piece .

Use the 2 screws given in the kit.

Torch Alignment Guide for Bevel Cutting

6811280 Field Service Bulletin Powermax125 / MAXPRO200

Use the torch alignment guide to put the torch in position for bevel cutting

This procedure gives general instructions for any track burner. The pictures show one example from

a common track burner. Your configuration can be different.

Hypertherm recommends that you use a track burner that is compatible with plasma cutting so that

you can get the best bevel cut results at the specified cut speeds. Use a remote start pendant for

the plasma cutting system if the track burner cannot start and stop the plasma torch.

1. Set the power to OFF (O) for the track burner and the plasma power supply.

2. Select the parameters to use for the metal thickness and the correct bevel cut angle. Use the

Powermax125 and MAXPRO200 Bevel compensation cut charts on page 11.

3. Put the torch alignment guide

on the workpiece to be cut.

Put the track down so that

it is touching the guide.

4. Examine both ends of the

track and different points in

between to make sure that

the track is touching the end

of the alignment guide. Also

make sure that the track is

parallel to the edge of the

plate.

5. When the track and the torch

alignment guide are in

position, engage the locking

mechanism on the track to

attach the track to the

workpiece. This mechanism is

different on different tracks.

Some tracks use magnets

as the locking mechanism, as

shown in this example.

6. Attach the track burner

tractor to the track. Connect

the cables for the track

burner and for the plasma

power supply. Refer to the

manufacturer instructions for

each system.

7. Adjust the X-axis arm to be approximately in the center of the tractor. Use the horizontal racker

control knob or equivalent control on your tractor.

2 2

Torch Alignment Guide for Bevel Cutting

Powermax125 / MAXPRO200 Field Service Bulletin 811280 7

8. Install the correct cutting consumables on the machine torch. Refer to the Powermax125 and

MAXPRO200 Bevel compensation cut charts on page 11.

9. Loosen the knobs or fasteners on the torch holder, as necessary. Put the torch in the holder and

tighten.

10. If there is a cable mount, make sure that the torch lead is correctly installed and tightened in the

cable mount.

11 . Loosen the control lever for the angle of the torch. Adjust the angle to 0°, or make sure that the

torch is squarely aligned to the workpiece. Tighten the control lever.

12. Loosen the control lever for the torch bevel angle. Adjust the torch to the correct bevel angle to

align with the settings from the bevel compensation cut charts.

a. Use a digital level to make sure that the angle of the torch is correct. If you have a

smartphone, you can also use a digital level application. In the following pictures, the digital

level is used to make sure that the torch is set to a 45° angle.

b. When the torch bevel angle is correct, tighten the control lever.

Digital level Digital level application on a smartphone

Torch Alignment Guide for Bevel Cutting

8811280 Field Service Bulletin Powermax125 / MAXPRO200

13. Move the torch alignment guide so that the correct torch clearance gauge is in front of the

torch.

One torch clearance gauge is for Air/Air processes. The other gauge is for O2/Air

processes (MAXPRO200 only). Refer to Figure 1 on page 4.

Make sure that you keep the torch alignment guide on the edge of the workpiece .

Torch Alignment Guide for Bevel Cutting

Powermax125 / MAXPRO200 Field Service Bulletin 811280 9

14. Use the bevel compensation cut charts to

find the correct edge offset value to use

for the torch clearance. Clearance is the

distance between the torch and the top of

the workpiece.

15. Put the torch clearance gauge in the

correct position, as follows:

a. Loosen the set screw .

b. Align the inside of the torch clearance

gauge with the correct position on the

ruler. Move the gauge higher or lower

on the guide, as necessary. The

position to use on the ruler is the edge

offset value from step 14.

c. For example, in the picture shown ,

the torch clearance gauge is set to an

edge offset of 1.5 inches.

d. When the torch clearance gauge is in

the correct position, tighten the set

screw.

16. Move the torch closer to the torch

clearance gauge, as follows:

a. Move the torch horizontally, as

necessary. Use the horizontal racker control knob or equivalent control on your tractor.

b. Move the torch vertically, as necessary. Loosen the knobs on the torch holder. Move the

torch closer to the torch clearance gauge and tighten the knobs.

c. If there is a torch height control knob or similar mechanism, use that to move the torch in

very small increments, as necessary. Adjust the torch height until the torch consumables

touch the torch clearance gauge.

d. Make sure that the tip of the torch is touching the torch clearance gauge and is

approximately perpendicular to the gauge, as shown.

Torch Alignment Guide for Bevel Cutting

10 811280 Field Service Bulletin Powermax125 / MAXPRO200

17. Remove the torch alignment guide from the workpiece.

18. Move the tractor as necessary until the torch consumables are centered on the edge of the

workpiece, as shown.

Start to cut

1. Set the power to ON (I) for the track burner and for the plasma power supply.

2. Use the bevel compensation cut charts to find the following values for the bevel cut:

Adjust the pierce delay setting on the tractor to use the correct pierce delay value from the

cut chart. Use the timer control knob or equivalent control on your tractor.

Adjust the speed of the tractor to use the correct cut speed value from the cut chart. Use

the speed control knob or equivalent control on your tractor.

Adjust the plasma power supply to use the correct current (A) value from the cut chart. Use

the amperage control knob on the front of the plasma power supply.

3. You are now ready to make the bevel cut. Can the track burner control both the tractor and the

plasma torch?

If yes, start the tractor to start both the plasma arc and the tractor motion.

If no, start the tractor and the plasma torch at the same time. Use a remote start pendant to

start the plasma arc.

4. Make sure that the plasma arc transfers to the workpiece and that the tractor starts the forward

motion.

5. At the end of the cut, stop the tractor as soon as the plasma arc extinguishes, if the tractor does

not stop automatically.

Altri manuali per Powermax 125

Questo manuale è adatto per i seguenti modelli

Altri manuali Hypertherm Sistema di saldatura

Hypertherm

Hypertherm powermax 380 Manuale utente

Hypertherm

Hypertherm powermax1250 Manuale utente

Hypertherm

Hypertherm Powermax1100 Manuale utente

Hypertherm

Hypertherm HT4100 Manuale utente

Hypertherm

Hypertherm MAX42 Manuale utente

Hypertherm

Hypertherm Powermax 900 Manuale utente

Hypertherm

Hypertherm powermax1250 Manuale utente

Hypertherm

Hypertherm Powermax45 XP Manuale utente

Hypertherm

Hypertherm Powermax 85 Manuale utente

Hypertherm

Hypertherm POWERMAX 45 Manuale utente

Hypertherm

Hypertherm Powermax1100 Manuale utente

Hypertherm

Hypertherm XPR300 Manuale utente

Hypertherm

Hypertherm powermax65 Manuale di riferimento

Hypertherm

Hypertherm Powermax 65 Manuale di riferimento

Hypertherm

Hypertherm Powermax30 AIR Manuale utente

Hypertherm

Hypertherm powermax65 Manuale utente

Hypertherm

Hypertherm HyPerformance Plasma HPR800XD Manuale di riferimento

Hypertherm

Hypertherm SYNC Powermax 65 Manuale utente

Hypertherm

Hypertherm HT2000 Manuale di riferimento

Hypertherm

Hypertherm POWERMAX 45 Manuale di riferimento

Hypertherm

Hypertherm Powermax30 AIR Manuale utente

Hypertherm

Hypertherm Powermax125 Manuale utente

Hypertherm

Hypertherm Powermax 1000 Manuale di riferimento

Hypertherm

Hypertherm Powermax45 XP Manuale di riferimento

Manuali Sistema di saldatura popolari di altre marche

Berner

Berner PLASMACUT 54 Manuale utente

Pro Spot

Pro Spot PR-155 Manuale utente

Forney

Forney 210 Manuale utente

Thermal Arc

Thermal Arc 400S Manuale utente

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuale utente

GYS

GYS PROTIG 201 AC/DC Manuale utente

TAFA

TAFA 30*8B35 Manuale utente

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuale utente

ESAB

ESAB Buddy Arc 145 Manuale utente

CIGWELD

CIGWELD 636804 Guida rapida

Red-D-Arc

Red-D-Arc DC-400 Manuale utente

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuale utente

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuale utente

WIA

WIA Weldmatic 270 CP132-2 Manuale utente

Sonics

Sonics H520T Manuale utente

Miller

Miller Big Blue 400D Manuale utente

NewArc

NewArc RT2000 Guida rapida

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manuale utente