Hyundai ImageQuest V773 Manuale utente
FCC ID : PJIC17R07075
ATTACHMENT E.
- USER’S MANUAL -
REPORTNO.:HCT-F03-0709 HYUNDAIC–TECH
NEXT
Type No. C17R07075
User’s Guide
ImageQuest V773
Multiscanning Color Monitor
Click
www.hyundaiQ.com
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
BACK
NEXT
WE ImageQuest CO., LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
KOREA/ HONG KI, KIM
(Place and date of issue) (Name and signature of
authorized person)
DECLARATION OF CONFORMITY
BACK
NEXT
Kind of equipment : COLOR MONITOR
Type-Designation : C17R07075
Safety : EN 60950 : 2000
EMC : EN 55022 : 1998+A1 : 2000 CLASS B
EN 55024 : 1998+A1 : 2001, EN 61000-3-2 : 2000
EN 61000-3-3 : 1995+A1:2001
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
July 15. 2003
V773
Multiscanning Color Monitor
BACK
NEXT
Contents 1. Introduction...............................1/18
2. Safety Information ...................1/18
3. Installing the monitor...............3/18
3-1. Packing List ..............................3/18
3-2.
Fastening the swivel and tilt base...
4/18
3-3. Selecting a suitable location .......4/18
3-4. Connecting the monitor..............5/18
3-5. Setting the refresh rate .............7/18
Preset Timing Table ...................7/18
4. Adjusting the picture ...............8/18
4-1. Using the On-Screen-Display........9/18
4-2. Direct access buttons ....................9/18
4-3. OSD Adjustments ........................10/18
5. Display power management ..14/18
Reducing power consumption..........14/18
6. Troubleshooting.......................15/18
7. Specifications ..........................18/18
V773
Multiscanning Color Monitor
1/18
BACK
NEXT
1. Introduction
2. Safety Information
This manual contains instructions for installing and operating ImageQuest V773.
ImageQuest V773 is a highly ergonomic color display unit;
• 17” diagonal (15.7” viewable) 0.23mm horizontal dot pitch CDT
• Supporting high screen refresh rates and full scan flicker-free picture quality
• With On Screen Display menus for user control
• 100-240V AC input voltage
• VESA DPMS (Display Power Management Signaling)
• VESA DDC1/2B compatibility
When you set up and use your display unit, follow the safety instructions below.
• Do not use the display unit in humid environments like bathrooms, damp
cellars, swimming pools, etc.
• This equipment must be connected to an earthed outlet which is close to the
display unit and accessible in case you need to disconnect the display.
• Do not connect an extension cord.
• Never insert objects into the openings on the outside of the device as you can
come into contact with live electrical components. This can cause fire or give
strong electrical shocks.
• Slots in the cabinet are provided for ventilation. Do not block the ventilation
slots in the display unit cabinet.
• Do not under any circumstances open the display unit cabinet.
V773
Multiscanning Color Monitor
2/18
BACK
NEXT
• To avoid risk of electric shock, do not disassemble the display unit cabinet.
The unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.
• Do not use alcohol (methyl, ethyl or isopropyl) or any strong solvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.
• Do not wipe the screen with a cloth or sponge that could scratch the surface.
• To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.
• To clean display unit cabinet, use a cloth lightly dampended with a mild
detergent.
• During the transportation of the monitor, the swivel base has to be removed in
every case.
Cleaning and Maintenance
V773
Multiscanning Color Monitor
3/18
BACK
NEXT
3. Installing the monitor
3-1. Packing List The following items should be found in the packaging.
Above power cord can be changed upon different voltage areas. Please
contact your dealer if anything is missing or damaged.
UK
America/Canada
Japan
Australia
Korea
Europe
South Africa
Attached
Signal
Cable
Tilt and Swivel Compact Disc Power cord
!
V773
Multiscanning Color Monitor
4/18
BACK
NEXT
3-2. Fastening the swivel
and tilt base
3-3. Selecting a suitable
location
• Place the base against the bottom of the monitor so that the base fasteners are
aligned with appropriate slots.
• Push the base towards the front of the monitor until the latch locks into
position.
• Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.
• Place the monitor in a position where no light shines directly onto or is
reflected on the screen.
• To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
• Position the monitor so that the top of the screen is no higher than eye level.
• Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)
V773
Multiscanning Color Monitor
5/18
BACK
NEXT
3-4. Connecting the
monitor Before you start cabling your monitor, check that
the power is off on all units. To avoid any
possibility of electric shock, always connect your
equipment to properly earthed outlets.
!
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Hyundai Monitor
Hyundai
Hyundai ImageQuest Q770 Manuale utente
Hyundai
Hyundai HYU-CC-MM32001 Manuale utente
Hyundai
Hyundai ImageQuest L17T Manuale utente
Hyundai
Hyundai Smartboard A S65UCAI Manuale utente
Hyundai
Hyundai ImageQuest LM1510A Manuale operativo
Hyundai
Hyundai N94Wd Manuale utente
Hyundai
Hyundai G95TR Manuale utente
Hyundai
Hyundai L22C0FLC0 Manuale utente
Hyundai
Hyundai P240W Manuale utente
Hyundai
Hyundai L19A00001 Manuale utente
Hyundai
Hyundai V770 Manuale utente
Hyundai
Hyundai L19C0D080 Manuale utente
Hyundai
Hyundai L19T Manuale utente
Hyundai
Hyundai R Series Manuale utente
Hyundai
Hyundai ImageQuest L50A Manuale operativo
Hyundai
Hyundai ImageQuest V995 Manuale utente
Hyundai
Hyundai ImageQuest ImageFlat F791 Manuale utente
Hyundai
Hyundai LCD Monitor U90D Manuale utente
Hyundai
Hyundai L17C0D080 Manuale utente
Hyundai
Hyundai P278DPL Manuale utente
