IBM LS42 - BladeCenter - 7902 Manuale utente

IBM BladeCenter LS42 Multiprocessor Expansion Unit

Installation Guide



IBM BladeCenter LS42 Multiprocessor Expansion Unit

Installation Guide



Note: Before using this information and the product it supports, read the general information in Appendix B, “IBM

Statement of Limited Warranty Z125-4753-10 08/2008,” on page 15 and Appendix C, “Notices,” on page 35.

First Edition (November 2008)

©Copyright International Business Machines Corporation November 2008.

US Government Users Restricted Rights –Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ...............v

Chapter 1. Introduction ........1

Installation guidelines ...........1

System reliability guidelines ........2

Handling static-sensitive devices.......2

Chapter 2. Installing the Multiprocessor

Expansion unit............5

Removing the blade server from the BladeCenter unit 7

Opening the blade server cover ........8

Removing the LS22 optimizer.........9

Installing options in the Multiprocessor Expansion

Unit .................9

Closing the blade server cover ........10

Installing the blade server in aBladeCenter unit ..11

Appendix A. Getting help and technical

assistance .............13

Before you call .............13

Using the documentation ..........13

Getting help and information from the World Wide

Web .................14

Software service and support ........14

Hardware service and support ........14

IBM Taiwan product service .........14

Appendix B. IBM Statement of Limited

Warranty Z125-4753-10 08/2008 ....15

Part 1-General Terms...........15

Part 2-Country-unique Terms ........19

Part 3-Warranty Information ........32

Appendix C. Notices .........35

Trademarks ..............35

Important notes .............36

Product recycling and disposal ........37

Battery return program ..........38

Electronic emission notices .........39

Federal Communications Commission (FCC)

statement ..............39

Industry Canada Class Aemission compliance

statement ..............40

Avis de conformité àla réglementation

d’Industrie Canada ...........40

Australia and New Zealand Class Astatement .40

United Kingdom telecommunications safety

requirement .............40

European Union EMC Directive conformance

statement ..............40

Taiwanese Class Awarning statement ....41

Chinese Class Awarning statement .....41

Japanese Voluntary Control Council for

Interference (VCCI) statement .......41

Korean Class AWarning Statement .....41

Index ...............43

©Copyright IBM Corp. November 2008 iii

iv IBM BladeCenter: LS42 Multiprocessor Expansion Unit

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat udit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

©Copyright IBM Corp. November 2008 v

Important:

All caution and danger statements in this documentation begin with anumber.

This number is used to cross reference an English caution or danger statement

with translated versions of the caution or danger statement in the IBM Safety

Information book.

For example, if acaution statement begins with anumber 1, translations for that

caution statement appear in the IBM Safety Information book under statement 1.

Be sure to read all caution and danger statements in this documentation before

performing the instructions. Read any additional safety information that comes

with the server or optional device before you install the device.

Statement 1

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid ashock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical storm.

vConnect all power cords to aproperly wired and grounded electrical outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

vi IBM BladeCenter: LS42 Multiprocessor Expansion Unit

Statement 21

CAUTION:

Hazardous energy is present when the blade is connected to the power source.

Always replace the blade cover before installing the blade.

Safety vii

viii IBM BladeCenter: LS42 Multiprocessor Expansion Unit

Altri manuali per LS42 - BladeCenter - 7902

Indice

Altri manuali IBM Hardware per computer

IBM

IBM 9125-F2C Manuale utente

IBM

IBM 6611 Manuale utente

IBM

IBM International ISDN Manuale utente

IBM

IBM 09N4076 Manuale utente

IBM

IBM Redbooks 2/4 Port Ethernet Expansion Card Manuale utente

IBM

IBM HOTR Manuale utente

IBM

IBM WD1003-WA2 Manuale utente

IBM

IBM 4764 Manuale utente

IBM

IBM System x Education M5000 Series Manuale utente

IBM

IBM 3301690 Manuale utente

IBM

IBM A2 Manuale utente

IBM

IBM M789 Series Manuale utente

IBM

IBM PowerPC 604 Manuale utente

IBM

IBM EMX0 PCIe3 Manuale di istruzioni

IBM

IBM POWERPC 970MP Istruzioni per l'installazione e il funzionamento

IBM

IBM BladeCenter S SAS RAID Controller Module Manuale utente

IBM

IBM 19K4543 Manuale utente

IBM

IBM 4381 Manuale utente

IBM

IBM 2740-1 Guida utente

IBM

IBM Power Systems 8247-42L Manuale utente

IBM

IBM 9332 Manuale utente

IBM

IBM BladeCenter Management Module Manuale utente

IBM

IBM 1 GB Microdrive Storage Card Manuale utente

IBM

IBM THINKCENTER 8128 Manuale del proprietario

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente