Icop VEX2-DIP168 Manuale utente
ICOP Technology Inc.
User Manual
VEX2-DIP168
VortexEX2
VEX2 168 pins
System-On-Module
User's manual
Version 1.0
VEX2-DIP168 User Manual
ICOP Technology Inc. I
Copyright
The information in this manual is subject to change without notice for
continues improvement in the product. All rights are reserved. The
manufacturer assumes no reasonability for any inaccuracies that may be
contained in this document and makes no commitment to update or to keep
current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted,
in whole or in part, in any form or by any means without the prior to written
permission of ICOP Technology Inc.
ⓒCopyright 2020 ICOP Technology Inc
Trademarks Acknowledgement
Vortex86EX2TM is the registered trademark of DM&P Electronics Inc.
Other brand names and product names that appear in this document are the
properties and registered trademarks of their respective owners. All names
mentioned herewith are served for identification purpose only.
VEX2-DIP168 User Manual
ICOP Technology Inc. II
Revision History
Revision
Date
Remark
1.0
2020.07.16
First revision
VEX2-DIP168 User Manual
ICOP Technology Inc. III
Table of Contents
1General Information...........................................................................................1
1.1 Overview ........................................................................................................................................................ 1
1.2 Block diagram................................................................................................................................................ 1
1.3 Specifications................................................................................................................................................. 2
1.4 Ordering Information .................................................................................................................................. 3
2Hardware Information .......................................................................................4
2.1 Dimension...................................................................................................................................................... 4
2.2 Connectors..................................................................................................................................................... 5
2.2.1 Connector on Module (Female) ....................................................................................................... 5
2.2.2Matching connector on board (Male).............................................................................................. 5
2.3 Recommended Layout (for module).......................................................................................................... 6
2.4 Pin Assignments & Jumper Setting............................................................................................................ 7
2.4.1 Pin assignment..................................................................................................................................... 7
2.2 Pin Table List................................................................................................................................................. 9
2.3 Signal Description....................................................................................................................................... 10
3 Programmable I/O Selection...............................................................................14
3.1 Programmable I/O overview.................................................................................................................... 14
3.2 Selection Table for I/O Function............................................................................................................ 17
4 Software Resources................................................................................................18
4.1 BIOS ............................................................................................................................................................. 18
4.2 Software........................................................................................................................................................ 18
5 ADC .........................................................................................................................19
5.1 ADC overview............................................................................................................................................. 19
5.2 ADC Sample code ...................................................................................................................................... 19
6Evaluation Board ...................................................................................................20
VEX2-DIP168 User Manual
ICOP Technology Inc. 1
1 General Information
1.1 Overview
The VEX2-DIP168 is a 35mm(L) x 55mm(W), 168 pins, single +5V input,
System On Module with Vortex86EX2 build-in 512MB/1GB DDR3; also
take advantage of Vortex86EX2 Programmable I/O as a powerful, flexible,
tiny and low power module.
1.2 Block diagram
VEX2-DIP168 User Manual
ICOP Technology Inc. 2
1.3 Specifications
Processor
DM&P SoC CPU Vortex86EX2 600MHz
RAM
512MB/1GB DDR3 Onboard
BIOS
Coreboot BIOS
Bus
PCI Express x2
ISA
LAN
Integrated 10/100Mbps Ethernet
Disk Support
Micro SD/eMMC (Option)
I/O Interface
USB v2.0 port x2
I/O Configuration
support up to 124 pins
GPIO up to 120-bit
ADC 12-bit channel x16
CAN x2
ISA
Printer
Keyboard
COM port x10 (max.)
I2C x2
SPI x2
HD Audio
SD/MMC
LAN
WatchingDog Timer
MTBF
Power Requirement
Single Voltage +5VDC @ 360mA
Operating Temperature
-20°C to +70°C
-40°C to +85°C (Option)
Dimension
35mm(L) x 55mm(W)
Weight
15g
O/S Support
DOS
FreeBSD
Windows CE6/Embedded Compact 7
VxWorks
X-Linux
QNX
VEX2-DIP168 User Manual
ICOP Technology Inc. 3
1.4 Ordering Information
Product Name
Description
VEX2-DIP168-3NE1
Vortex86EX2 DIP168 pin
CPU Module with 512MB DDR3, Micro SD disk support
VEX2-DIP168-4NE1
Vortex86EX2 DIP168 pin
CPU Module with 1GB DDR3, Micro SD disk support
VEX2-DIP168-3EE1
Vortex86EX2 DIP168 pin
CPU Module with 512MB DDR3, 4GB eMMC disk support
VEX2-DIP168-4EE1
Vortex86EX2 DIP168 pin
CPU Module with 1GB DDR3, 4GB eMMC disk support
VEX2-DIP168 User Manual
ICOP Technology Inc. 4
2 Hardware Information
2.1 Dimension
VEX2-DIP168 User Manual
ICOP Technology Inc. 5
2.2 Connectors
2.2.1 Connector on Module (Female)
Vendor: Conn Top Component INC
Item number: P3N23-242D1BKC000E
2.2.2 Matching connector on board (Male)
On the carrier board, it needs 2 pcs of matching connectors. Here is the
connector detail for your reference.
Vendor: Conn Top Component INC.
Conn Top item number: number: H3N25-242D1BKC002F
ICOP item number: number: PH2*42(1.27)-5.3MM
Note: Customer can buy connector from ICOP. The item number is
PH2*42(1.27)-5.3MM. For details, please contact ICOP sales.
Indice
Altri manuali Icop Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
