ICRealtime ICIP-P2012C Manuale utente
Intelligent Speed Dome Installation Manual
Version 1.0.0
i
Table of Contents
1INTELLIGENT SPEED DOME INSTALLATION..................................................1
1.1 Installation Environments .....................................................................................................................1
1.2 Check installation space and installation location intension ...........................................................1
1.3 About cable.............................................................................................................................................1
1.4 Please keep all package material well for future use.......................................................................1
2SETUP BEFORE INSTALLATION ......................................................................2
2.1 Check Accessories................................................................................................................................2
2.2 Open Device...........................................................................................................................................2
2.3 Initial Setup.............................................................................................................................................2
2.4 Dial Switch Setup (For Analog Speed Dome Only)..........................................................................3
2.4.1 Dial Switch Buttons...........................................................................................................................3
2.4.2 Baud Rate and Parity Setup............................................................................................................4
2.4.3 Address ..............................................................................................................................................5
2.4.4 Terminal Matching Resistance Setup ............................................................................................5
3CEILING MOUNT................................................................................................7
3.1 Installation Components .......................................................................................................................7
3.2 Ceiling Mount Installation Steps ..........................................................................................................7
3.2.1 Installation Environments.................................................................................................................7
3.2.2 Installation Steps...............................................................................................................................7
3.2.3 Cable Connection .............................................................................................................................9
ii
4WALL MOUNT BRACKET INSTALLATION......................................................10
4.1 Component Installation .......................................................................................................................10
4.2 Wall Mount Installation Steps ............................................................................................................10
4.2.1 Installation Environments...............................................................................................................10
4.2.2 Installation Steps.............................................................................................................................10
5IN-CEILING MOUNT BRACKET INSTALLATION ............................................13
5.1 Component Installation .......................................................................................................................13
5.2 Installation.............................................................................................................................................13
5.2.1 Installation Requirements ..............................................................................................................13
5.2.2 Installation Steps.............................................................................................................................13
6APPENDIX Ⅰ THUNDER PROOF AND SURGE PROTECTION .......................16
7APPENDIX Ⅱ ABOUT RS485 BUS ...................................................................17
7.1 RS485 Bus Main Feature ...................................................................................................................17
7.2 RS485 Bus Transmission Distance ..................................................................................................17
7.3 The Problem in Practical Use ............................................................................................................17
7.4 RS485 Bus FAQ ..................................................................................................................................18
8APPENDIX Ⅲ THE 24V AC WIRE GAUGE AND TRANSMISSION DISTANCE
RELATIONSHIP SHEET ..........................................................................................19
iii
9APPENDIX Ⅳ12V AC WIRE GAUGE AND TRANSMISSION DISTANCE
RELATIONSHIP SHEET ..........................................................................................20
10 APPENDIX V WIRE GAUGE REFERENCE SHEET ........................................21
iv
Welcome
Thank you for purchasing our speed dome!
Please read the following safeguards and warnings carefully before you install or use the
product!
v
Important Safeguards and Warnings
Safety Measures
1. Qualified Engineer Needed
zThe installation engineer or maintenance engineer shall have corresponding CCTV system
installation certificate or maintenance qualification certificate.
zThe installation engineer or maintenance engineer shall have qualification certificate for work
at height.
zThe installation engineer or maintenance engineer shall have the basic knowledge and
operation technique for low-voltage cable layout and low-voltage electronic cable connection.
zPlease read the installation manual carefully and keep it well for future reference,
zWe are not liable for any problems caused by unauthorized modifications or attempted repair.
2. Lifting Appliance Requirement
zPlease select the proper speed dome installation mode and use the lifting appliances at the
safety environment.
zThe lifting appliances shall have the enough capacity to reach the installation height.
zThe lifting appliances shall have safe performance.
The precaution measures include two types: Warning and Note.
zWarning: It is to alert you there is an optional risk of death or series injury!
zNote: It is to alert you there is an optional risk of damage or property loss!
Warning
1. All installation and operation here should conform to your local electrical safety codes. We
assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
2. Be sure to use all the accessories (such as power adapter) recommended by manufacturer.
3. Do not connect several speed domes to one power adapter. It may result in overheat or fire
if it exceeds the rated load.
4. Before you connect the cable, install or uninstall, or begin the daily maintenance work,
please turn off the power and unplug the power cable.
5. Please make sure the produce is secure firmly on the wall or the ceiling.
6. Please turn off the power and unplug the power cable, If there is any smoke, disgusting
smell, or noise. Please contact your local retailer or customer service centre for help.
vi
7. All the examination and repair work should be done by the qualified service engineers. We
are not liable for any problems caused by unauthorized modifications or attempted repair.
Note
1. Safety Transportation
zHeavy stress, violent vibration or water splash are not allowed during transportation, storage
and installation.
zThis series product must use split type package during the transportation.
zWe are not liable for any damage or problem resulting from the integrated package during
the transportation.
2. When device is malfunction
Shut down the device and disconnect the power cable immediately if there is smoke, abnormal
smell or abnormal function. Please contact your local retailer ASAP.
3. Do not try to dismantle or modify the device
zThere is risk of personal injury or device damage resulting from opening the shell.
zPlease contact your local retailer if there is internal setup or maintenance requirement.
zWe are not liable for any problems caused by unauthorized modifications or attempted repair.
4. Do not allow other object falling into the device
zPlease make sure there is no metal or inflammable, explosive substance in the speed dome.
zThe above mentioned objects in the device may result in fire, short-circuit or damage.
zPlease shut down the device and disconnect the power cable if there is water or liquid falling
into the camera. Please contact your local retailer ASAP.
zPlease pay attention to the camera. Avoid the sea water or rain to erode the camera.
5. Handle carefully
Do not allow this series product fall down to the ground.
Avoid heavy vibration.
6. Installation Environment Requirement
zThis series speed dome should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
zThis series product shall be away from the strong electromagnetism radiant, please keep it
away from wireless power, TV transmitter, transformer and etc.
7. Daily Maintenance
zPlease use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning
liquid to clean the shell and then use soft cloth to make it dry.
vii
zDo not use gasoline, dope thinner or other chemical material to clean the shell. It may result
in shell transfiguration or paint flake.
zDo not allow the plastic or rubber material to touch the shell for a long time. It may result in
paint flake.
1
1INTELLIGENT SPEED DOME INSTALLATION
1.1 Installation Environments
Basic Requirement
zAll installation and operation here should conform to your local electrical safety codes.
zBefore installation, please open the package and check all the components are included.
Please make sure the speed dome installation environment and installation mode can meet
your requirement. If there is special requirement, please contact your local retailer for more
information.
zWe assume no liability or responsibility for all the fires or electrical shock caused by
improper handling or installation.
1.2 Check installation space and installation location intension
Please make sure the installation environment has enough space to install the speed dome and
its corresponding bracket.
Please make sure the ceiling, wall and the bracket can support the speed dome and its
corresponding installation component. It shall sustain the 8X weight of the speed dome.
1.3 About cable
Please select the cable according to your transmission distance.
The minimum video coaxial-cable requirement is:
z75 ohm.
zFull cable with copper conductor
z95% knitted copper shield
International Model Max Distance
(Ft\M)
RG59/U 750ft (229m)
RG6/U 1,000ft (305m)
RG11/U 1,500ft (457m)
zPlease refer to Appendix 2 for RS485 communication cable information.
Select eclectic wire according to your transmission distance:
zFor 24V AC series product, please refer to Appendix 3.
zFor 12V DC series product, please refer to Appendix 4.
1.4 Please keep all package material well for future use
Please keep speed dome package material well in case you need to send it back to your local
retailer or manufacturer for maintenance work.
Non-original package material may result in device damage during the transportation.
2
2SETUP BEFORE INSTALLATION
2.1 Check Accessories
Before the installation, please check the accessories one by one according to the packing list.
Please make sure all the components listed are included.
2.2 Open Device
This section is for intelligent analog speed dome, intelligent network speed dome, and intelligent
tracking speed dome.
Remove the package and then take out the device. Open the transparent cover and take out the
packing material EPE around the speed dome drive. Please remove the paster from the pedestal.
See Figure 2-1.
Figure 2-1
2.3 Initial Setup
The default setup is:
zAddress: 1
zBaud rate: 9600
zParity: None
z120Ωresistance: OFF
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali ICRealtime Telecamera di sicurezza
ICRealtime
ICRealtime ICIP-P2300Y-IR Manuale utente
ICRealtime
ICRealtime ICIPP3020HDIR Manuale utente
ICRealtime
ICRealtime ICIP D3000AVIR-M Manuale utente
ICRealtime
ICRealtime EL-2000 I-sniper Manuale utente
ICRealtime
ICRealtime ICIP 3000DV-I Manuale utente
ICRealtime
ICRealtime HD Pinhole Manuale utente
ICRealtime
ICRealtime IPFX-S20F-W1 Manuale utente
ICRealtime
ICRealtime ICR2200 Manuale utente
ICRealtime
ICRealtime ICIPD1300 Manuale utente
ICRealtime
ICRealtime ICR540IN Manuale utente
ICRealtime
ICRealtime ICIP-D3077P Manuale utente
ICRealtime
ICRealtime ClearView WiFi-2MP-BL100 Manuale utente
ICRealtime
ICRealtime EL-3000 Manuale utente
ICRealtime
ICRealtime ICR-100X Manuale utente
ICRealtime
ICRealtime AVS-4MB4016-IR Manuale utente
ICRealtime
ICRealtime IPMX Series Manuale utente
ICRealtime
ICRealtime EL-3000N Manuale utente
ICRealtime
ICRealtime HDAVS Series Manuale utente
ICRealtime
ICRealtime AVS-4MD5110-VIR Manuale utente
ICRealtime
ICRealtime ICIPD2730 Manuale utente
