IEI Technology HYPER-BW Manuale utente

Pico-ITX SBC with Intel® 14nm Pentium®/Celeron® on-board SoC

with dual Mini HDMI, M.2 2242, GbE, USB 3.0, SATA 6Gb/s,

COM, Audio and RoHS

HYPER-BW

Quick Installation Guide

Version 1.0

Dec 12, 2017

Package List

HYPER-BW package includes the following items:

1 x HYPER-BW single board computer

1 x RS-232 cable

1 x SATA with power cable kit

1 x One Key Recovery CD

1 x QIG (Quick Installation Guide)

1 x Utility CD

Specifications

SoC:

Intel® Pentium® N3710 on-board SoC

(up to 2.56GHz, quad-core, 2MB cache, TDP=6W)

Intel® Celeron® N3160 on-board SoC

(up to 2.24GHz, quad-core, 2MB cache, TDP=6W)

Intel® Celeron® N3060 on-board SoC

(up to 2.48GHz, dual-core, 2MB cache, TDP=6W)

Intel® Celeron® N3010 on-board SoC

(up to 2.24GHz, dual-core, 2MB cache, TDP=4W)

Intel® Celeron® x5-E8000 on-board SoC

(up to 2.00GHz, quad-core, 2MB cache, TDP=5W)

BIOS:AMI UEFI BIOS

Memory:

One 204-pin 1333/1600 MHz single-channel DDR3L SDRAM

unbuffered SO-DIMM slot support up to 8 GB

Graphics Engine:

Intel® HD Graphics Gen 8 Engine with 16 low-power execution

units, supporting DX11.1, OpenGL 4.2 and OpenCL1.2

Display Output:

Dual independent display

2 x Mini HDMI (up to 3840x2160@30Hz)

Ethernet:

LAN1: Realtek RTL8111 controller

External I/O Interfaces:

1 x USB 2.0

1 x USB 3.0

Internal I/O Interfaces:

1 x RS-232 (1x9 pin, P=1.25)

1 x SATA 6G/s with 5V SATA power connector (No RAID)

(SATA port0)

2 x USB 2.0 (2x4 pin, P=2.0)

Audio:

1 x HD Audio (2x5 pin)

Front Panel:

1 x Front panel (1x10 pin, power LED, HDD LED, power

buttom, reset buttom)

LAN LED: 1 x LAN LED (1x2 pin)

Expansion :

1 x M.2 2242 (B key)

Fan Connector:

1 x Smart fan connector (1x4 pin)

Power supply:

12V DC input only

1 x Power terminal block (1x2 pin)

Support AT/ATX mode

Power Consumption:

[email protected] (Intel® Pentium® processor N3710 with 8 GB

1600 MHz DDR3L memory)

Watchdog Timer:

Software programmable supports 1~255 sec. system reset

Operating Temperature: -20°C ~ 60°C

Storage Temperature: -30°C ~ 70°C

Operation Humidity: 5% ~ 95%, non-condensing

Vibration: 3G

Dimensions: 100mm x 72mm

Weight(GW/ NW):300g/ 250g

Ordering Information



Pico-ITX SBC with Intel® Pentium® 14nm quad-core N3710 up

HYPER-BW-N4-R10:

to 2.56GHz (6W) on-board SoC with dual Mini HDMI, PCIe GbE,

M.2 2242, USB 3.0, SATA 6Gb/s, COM, Audio and RoHS



Pico-ITX SBC with Intel® Celeron® 14nm quad-core N3160 up

HYPER-BW-N3-R10:

to 2.24GHz (6W) on-board SoC with dual Mini HDMI, PCIe GbE,

M.2 2242, USB 3.0, SATA 6Gb/s, COM, Audio and RoHS



Pico-ITX SBC with Intel® Celeron® 14nm dual-core N3060 up

HYPER-BW-N2-R10:

to 2.48GHz (6W) on-board SoC with dual Mini HDMI, PCIe GbE,

M.2 2242, USB 3.0, SATA 6Gb/s, COM, Audio and RoHS



Pico-ITX SBC with Intel® Celeron® 14nm dual-core N3010 up

HYPER-BW-N1-R10:

to 2.24GHz (4W) on-board SoC with dual Mini HDMI, PCIe GbE,

M.2 2242, USB 3.0, SATA 6Gb/s, COM, Audio and RoHS



Pico-ITX SBC with Intel® Celeron® 14nm quad-core x5-E8000

HYPER-BW-E8-ECO-R10:

up to 2.00GHz (5W) on-board SoC with dual Mini HDMI, PCIe

GbE, M.2, USB 3.0, SATA 6Gb/s, COM, Audio, ECO packing

and RoHS

32000-070301-RS:



Dual-port USB cable

Realtek ALC892 7.1 Channel HD Audio peripheral board,RoHS

AC-KIT-892HD-R10:

Jumpers setting and connectors

LABEL FUNCTION

J_ATX_AT1 Select ATX or AT mode

J_CMOS1 CMOS state setting

COM1 External RS-232 Serial Port Connector

F_PANEL1

Front Panel Connector

USB_CON1

USB 2.0 and USB 3.0 Connector

USB2 USB 2.0 Connector

JSPI1

BIOS SPI ROM Programming Connector

CPU_FAN1 CPU Fan Connector

LED_LAN1

LAN1 link LED connector

PWR1

+12V DC power input connector

SATA_PWR2 SATA power connector

SATA1

SATA connector

J_AUDIO1 HDA audio Connector

COM1: External RS-232 Serial Port Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

NDCD1

NDSR1

NRXD1

NRTS1

NTXD1

NCTS1

NDTR1

NRI1

GND

J_ATX_AT1: AT/ATX Power Mode Setting

PIN NO.

DESCRIPTION

Short 1 - 2

ATX Power Mode (default)

Short 2 - 3

AT Power Mode

J_CMOS1: Clear CMOS Setup

PIN NO.

DESCRIPTION

Open Normal Operation (Default)

Push

Clear CMOS Setup

JSPI1: BIOS SPI ROM Programming Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 +SPI_VCC 2 SPI_CS0#_CN

3 SPI_SO0_CN 4 SPI_CLK0_CN

5 SPI_SI0_CN 6 GND

USB2: USB 2.0 Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 +5V 2 GND

3 USB20_C_N2 4 USB20_C_P3

5 USB20_C_P2 6 USB20_C_N3

7 GND 8 +5V

USB_CON1: USB 2.0 and USB 3.0 Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 +5V 2 USB2P0_DM0_L

3 USB2P0_DP0_L 4 GND

5 USB3P0_RXDN0_C 6 USB3P0_RXDP0_C

7 GND 8 USB3P0_TXDN0_C

9 USB3P0_TXDP0_C 10 +5V

11 USB2P0_DM1_L 12 USB2P0_DP1_L

13 GND

F_PANEL1: Front Panel Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 NC 2 PWRBTN_SW

3 GND 4 HDDLED+

5 HDDLED- 6 PWRLED+

7 PWRLED+ 8 GND

9 EXTRST- 10 GND

SATA1: SATA connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

SATA_TX0+

3 SATA_TX0- 4 GND

5 SATA_RX0+ 6 SATA_RX0-

7 GND

LED_LAN1: LAN1 link LED connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 +3.3VLAN 2 LAN1_LED_LINK#

PWR1: +12V DC power input connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 GND 2 12V

SATA_PWR2: SATA power connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 +5V 2 GND

CPU_FAN1: CPU Fan Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 GND 2 +12V

3 FANIO1 4 FANOUT1

J_AUDIO1: HDA audio Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

HDA_SYNC

HDA_BCLK

HDA_SDO

HDA_SPKR

HDA_SDI0

HDA_RST#

7 +5V 8 AGND

9 +12V 10 AGND

Board Layout: Jumper and Connector Locations

(Unit: mm)

Altri manuali per HYPER-BW

Indice

Altri manuali IEI Technology Scheda madre

IEI Technology

IEI Technology ISP-9652 Manuale utente

IEI Technology

IEI Technology KINO-945GSE Manuale utente

IEI Technology

IEI Technology IMBA-C2460 Manuale utente

IEI Technology

IEI Technology NANO-4386A2 Manuale utente

IEI Technology

IEI Technology NOVA-300 Manuale utente

IEI Technology

IEI Technology IMBA-Q870-i2 Manuale utente

IEI Technology

IEI Technology IMB-8550 Manuale utente

IEI Technology

IEI Technology KINO-9454 Manuale utente

IEI Technology

IEI Technology IMB-9454G-R40 Manuale utente

IEI Technology

IEI Technology KINO-LX Manuale utente

IEI Technology

IEI Technology IMBA-C2160 Manuale utente

IEI Technology

IEI Technology IEM-DB-7S-RS Manuale utente

IEI Technology

IEI Technology WAFER-US15WP2 Manuale utente

IEI Technology

IEI Technology HYPER-BW Manuale utente

IEI Technology

IEI Technology IMBA-C604EP Manuale utente

IEI Technology

IEI Technology NANO-KBN-i1 Manuale utente

IEI Technology

IEI Technology WAFER-4823 Manuale utente

IEI Technology

IEI Technology SAGP-648E Manuale utente

IEI Technology

IEI Technology NOVA-PV-D5251-G4-R11 Manuale utente

IEI Technology

IEI Technology Wafer-CX700m Manuale utente

IEI Technology

IEI Technology NANO-945GSE2 Manuale utente

IEI Technology

IEI Technology WAFER-8523 Manuale utente

IEI Technology

IEI Technology KINO-AH612 Manuale utente

IEI Technology

IEI Technology IMBA-H810 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente