IFM Electronic Efector200 OGS50 Series Manuale utente

Operating instructions

Through-beam sensor

OGS50x

OGE50x

704071 / 01 02 / 2008

1 Functions and features

The through-beam sensor detects objects and materials without contact and

indicates their presence by a switching signal.

For the range see the type label.

2 Installation

transmitter receiver

Install the receiver (OGE...) and secure it to a bracket.►

Align the transmitter (OGS...) to the receiver and fix it.►

3 Electrical connection

Disconnect power.►

Connect the unit as follows.►

Transmitter

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

— — pin 4

— — pin 2

Core colours BN = brown, BU = blue, BK = black

Receiver

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

load BK pin 4

— — pin 2

Core colours BN = brown, BU = blue, BK = black

4 Operating and display elements

transmitter receiver

�

  

LED1:

[OUT off]2:

[OUT on]3:

4 Settings

4.1 The receiver is to switch when the object is detected

Position the object.►

receiver transmitter

Press [OUT on] for 2 s.►

The sensitivity is set to the object.>

The LED flashes.>

Remove the object.►

receiver transmitter

Press [OUT off].►

The sensitivity is set without object.>

The LED goes out. The programming is finished.>

4.2

The receiver is not to switch when the object is detected

Position the object (see figure 1) and press [OUT off] for 2►

Remove the object (see figure 2) and press [OUT on].►

The settings can also be carried out first without object (step 1) and then with

object (step 2).

4.3 Programming unsuccessful

LED flashes quickly, 8 Hz.>

Possible causes

Insufficient difference in measurements.•

Max. programming time of 15 min. exceeded.•

4.4 Setting of maximum sensitivity

Align the receiver so that no light is received.►

The receiver is to switch when the object is detected.

First press [OUT on] and then [OUT off].►

The receiver is to switch when the object is not detected.

First press [OUT off], then [OUT on].►

4.5 Locking or unlocking the buttons

The unit can be locked electronically to prevent unintentional settings.

Press [OUT on] and [OUT off] simultaneously for►

10 s.

Acknowledgement is indicated by a change of the>

LED status.

5 Operation

Check whether the sensors operate correctly.►

The receiver LED lights when the switching output is switched.>

6 Maintenance

Keep the lenses of the sensors free from soiling.►

For cleaning do not use any solvents or cleaning agents which could damage►

the plastic lenses.

Technical data and further information at www.ifm.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali IFM Electronic Accessori

IFM Electronic

IFM Electronic O5E5 A Series Manuale utente

IFM Electronic

IFM Electronic O5D10 series Manuale utente

IFM Electronic

IFM Electronic efector150 Manuale utente

IFM Electronic

IFM Electronic Efector 300 Manuale utente

IFM Electronic

IFM Electronic efector150 KQ6 Manuale utente

IFM Electronic

IFM Electronic KQ5 Series Manuale utente

IFM Electronic

IFM Electronic EFECTOR 600 TW2000 Manuale utente

IFM Electronic

IFM Electronic Efector 200 Manuale utente

IFM Electronic

IFM Electronic Efector 200 O5H Manuale utente

IFM Electronic

IFM Electronic efector 200 OGT Series Manuale utente

IFM Electronic

IFM Electronic OGP Manuale utente

IFM Electronic

IFM Electronic Efector 150 KNM Manuale utente

IFM Electronic

IFM Electronic efector200 OC Manuale utente

IFM Electronic

IFM Electronic Efector 200 Manuale utente

IFM Electronic

IFM Electronic Efector 200 OL Series Manuale utente

IFM Electronic

IFM Electronic VKV021 Manuale utente

IFM Electronic

IFM Electronic OPD100 Manuale utente

IFM Electronic

IFM Electronic efector 300 SM0505 Manuale utente

IFM Electronic

IFM Electronic efector180 IX5010 Manuale utente

IFM Electronic

IFM Electronic efector 250 Manuale utente

IFM Electronic

IFM Electronic efectro 500 Manuale utente

IFM Electronic

IFM Electronic efector 200 OJ51 Series Manuale utente

IFM Electronic

IFM Electronic efector500 PC3 Series Manuale utente

IFM Electronic

IFM Electronic efector 300 SU8001 Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuale utente