IFM Electronic Efector230 Manuale utente

Operating instructions

Ultrasonic diffuse reflective sensors

UGB

UGC

80237715 / 00 04 / 2016

1 Preliminary note

1.1 Symbols used

►Instructions

> Reaction, result

→Cross-reference

Important note

Non-compliance may result in malfunction or interference.

Information Supplementary note.

2 Safety instructions

• Installation, electrical connection, set-up, operation and maintenance of the unit

must be carried out by qualified personnel authorised by the machine operator.

3 Functions and features

Ultrasonic sensors detect objects of various materials without any contact.

Depending on the selected sensor, detected objects are signalled via switching

output or their distance is indicated by means of a proportional analogue signal.

4 Installation

UGBxxx / UGCxxx

1: Status LED (yellow) 2: Echo LED (green)

►Position object.

►Align the ultrasonic sensor so that it directly faces the object or the background

and secure it to a bracket.

> Object / background is detected when the echo LED (green) lights.

Sound-absorbing surfaces have a negative effect on a reliable function.

During installation of the device, consider the blind zone.

5 Electrical connection

►Disconnect power.

►Connect device (depending on the type selected)

Core colours

2 1

L+

OUT

2WH

Teach

L+

OUT

2WH

Teach

Units with binary output

BK Black OUT: Switching output

BN Brown Teach: Programming wire

BU Blue Units with analogue output

OUT: Analogue output

WH White Teach: Programming wire

Colours to DIN EN 60947-5-2

Technical data and further information at → www.ifm.com

6 Set-up

Note the LED behaviour for the set-up:

Echo LED green

On Echo is received.

Off No echo (object / background not detected).

Off For the time of resetting to factory setting.

Status LED yellow

LED Function acknowledgement

Flashes 1 Hz x Programming mode active.

Flashes 2.5 Hz x Setting distance P1 completed.

Flashes 4 Hz x Setting distance P2 completed or

assignment acknowledgement of the setting.

Flashes 10 Hz x Inverting the switching characteristics.

7 Wire programming

Unit with switching output: Teach with L+. Unit with analogue output: Teach with L-.

L+

OUT

2WH

L+

OUT

2WH

8 Settings

►Start programming mode of the device.

►Connect teach input, 2 s...6 s → 7 Wire programming.

> LED flashes (1 Hz).

If programming has not been completed successfully, the device returns to

the previous setting.

8.1

Window function, distance P1 > P2

►Object in position P1.

►Connect teach input approx. 1 s.

> LED flashes (2.5 Hz).

►Object in position P2.

►Connect teach input approx. 1 s.

> LED flashes (4 Hz).

B P2 P1

Output response:

Units with switching outputs.

Output response:

Units with analogue output.

B P2 P1

X: Distance B: Blind zone

Y: Output response P1: Setting point 1 (OUTx)

①: OUT1 (switching output) P2: Setting point 2 (OUTx)

②: OUT2 (analogue output)

8.2 Hysteresis function, distance P1 = P2

►Object in position P1.

►Connect teach input approx. 1 s.

> LED flashes (2.5 Hz).

►Object in position P2.

►Connect teach input approx. 1 s.

> LED flashes (4 Hz).

B P1/P2

Output response:

Units with switching outputs.

Output response:

Units with analogue output

B P1/P2

8.3 Inverting the output response

►Connect teach input > 6 s → 7 Wire programming.

> LED flashes (> 10 Hz).

Inverted output function (switching output: NO changes to NC or vice versa /

Analouge output: low...high signal changes to wird high... low signal or vice versa

8.4 Restore factory setting

►Align the device so that no echo is received.

►Go into the programming mode of the unit.

►Connect teach input 1 s → 7 Wire programming.

> LED flashes shortly with 4 Hz.

9 Operation

►Check whether the unit operates correctly.

> Display by LEDs:

Green LED is lit. Echo is received.

Yellow LED is lit Output is switched / object is into the teached operating range .

Green LED flashes Short circuit at the output.

The minimum distance between the “Proximity Switch Metal Enclosure“ and

any “External uninsulated live part“ shall be at least 12.7 mm.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali IFM Electronic Accessori

IFM Electronic

IFM Electronic efector 200 OG laser Manuale utente

IFM Electronic

IFM Electronic Efector230 Manuale utente

IFM Electronic

IFM Electronic Efectorsod PE70 Series Manuale utente

IFM Electronic

IFM Electronic Efector500 PF2058 Manuale utente

IFM Electronic

IFM Electronic Efector 500 PL2058 Manuale utente

IFM Electronic

IFM Electronic Efectorsod PM2053 Manuale utente

IFM Electronic

IFM Electronic efector200 OGP50 Series Manuale utente

IFM Electronic

IFM Electronic efector180 IX5010 Manuale utente

IFM Electronic

IFM Electronic PN5 series Manuale utente

IFM Electronic

IFM Electronic efector 200 OJ Series Manuale utente

IFM Electronic

IFM Electronic efector 200 OT Manuale utente

IFM Electronic

IFM Electronic Efector 300 Manuale utente

IFM Electronic

IFM Electronic TS502A Manuale utente

IFM Electronic

IFM Electronic Efector 100 series Manuale utente

IFM Electronic

IFM Electronic Efector 300 Manuale utente

IFM Electronic

IFM Electronic efector300 SBU3 Manuale utente

IFM Electronic

IFM Electronic EFECTOR200 OC Series Manuale utente

IFM Electronic

IFM Electronic efector200 O7H2 Series Manuale utente

IFM Electronic

IFM Electronic O5H Manuale utente

IFM Electronic

IFM Electronic LK8122 Manuale utente

IFM Electronic

IFM Electronic SB 4 Series Manuale utente

IFM Electronic

IFM Electronic efector150 KQ6 Manuale utente

IFM Electronic

IFM Electronic efector 200 OW Series Manuale utente

IFM Electronic

IFM Electronic efector200 OJ Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuale utente

IFM Electronic efector230 Manuale utente

Manuali Accessori popolari di altre marche