IFM Efector 200 Series Manuale utente

Operating instructions

Through-beam sensor

OGE3xx / OGS3xx

UK

UK

704461 / 01 01 / 2009

2

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

The through-beam sensor detects objects and materials without contact and

indicates their presence by a switching signal.

Range: (→type label).

3 Installation

11

LED1:

Install the receiver (OGE3xx) and secure it to a bracket.►

Align the transmitter (OGS3xx) to the receiver and secure it in the same way.►

Maximum range only with accurate alignment.

4 Electrical connection

The unit must be connected by a qualified electrician.

The national and international regulations for the installation of electri-►

cal equipment must be adhered to.

Ensure voltage supply to EN 50178.►

Disconnect power.►

Connect the unit as follows:►

3

UK

Transmitter (OGS3xx) connector

1

3

L+

L

pin 1 = L+

(pin 2: not connected)

pin 3 = L-

(pin 4: not connected)

Transmitter (OGS3xx) cable *

L+

L

BN

BU

BN = L+

BU = L-

Receiver (OGE3xx) connector

L+

L

1

4

3

pin 1 = L+

(pin 2 = not connected)

pin 3 = L-

pin 4 = load

Receiver (OGE3xx) cable *

BN

BK

BU

L+

L

BN = L+

BU = L-

BK = load

* Core colours: BN = brown, BU = blue, BK = black

5 Operation

Check whether the unit operates correctly.►

Transmitter (OGS3xx): The green LED is lit when the sensor is ready for•

operation.

Receiver:•

Dark-on switching units (OGE-DPKG): the output is switched / the yellow LED

is lit when an object is detected.

Light-on switching units (OGE-HPKG): the output is switched / the yellow LED

is lit when no object is detected.

4

6 Maintenance, repair and disposal

Keep the front lenses of the sensor free from soiling.►

For cleaning do not use any solvents or cleaning agents which could damage►

the plastic material.

Technical data and further information at

www.ifm.com →Select your country →Data sheet direct:

Altri manuali per Efector 200 Series

1

Questo manuale è adatto per i seguenti modelli

2

Indice

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente