iHome iBT33v3 Manuale utente
Model: iBT33(USA)
iBT33V3 (CANADA)
instruction manual
iBT33v3 IB (English) water proof
Size: 153mm x 120mm
Printing color: Black
Oct 14, 2016 P1
Waterproof Rechargeable
Bluetooth Stereo Speaker
CHARGE
BEFORE
USE
Questions? Contact Customer Service at 1-800-288-2792
Limited 1 Year Warranty
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in
workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should
this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon
delivery of this product to the Factory Service Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping
instructions. A copy of the sales receipt is required to validate in-warranty coverage.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which
have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes
(if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original
purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be
liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages.
(Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply
to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product.
© 2016 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
iBT33V3-161014-B Printed in China
P17
9/19/2016
10/14/2016
10/14/2016
1
iBT33
IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION
For proper waterproof operation, make sure the waterproof cover on back of the unit is completely
flush with the unit by pressing along the entire edge of the cover until it is completely and securely in
place
• The unit is IP67 waterproof rated, meaning it is immersible for up to 30 minutes at a depth of 1 meter
(3 feet). It will typically withstand rain, snow and being submersed in shallow water. Longer duration or
deeper immersion that exceeds the tested limits may cause product failure and void the warranty.
• DO NOT immerse the unit in water for extended periods.
• DO NOT immerse the unit in water deeper than 1 meter (about 3 feet).
• Make sure cover and surrounding surfaces are completely dry before opening cover to prevent moisture
from damaging the internal electronics.
• Keep rubber cover free of dirt, sand, or other objects that can interfere with proper sealing. If for any
reason the waterproof cover is not making a tight waterproof seal water may enter the unit.
• Rinse with tap water after immersion in salt water or swimming pool.
• DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth.
water
tight
not
water
tight
iBT33
Introduction
2
Thank you for purchasing the iHome iBT33. This product is designed to provide high quality wireless
sound for your Bluetooth audio device and for waterproof, dustproof and shock proof operation.
This instruction booklet explains the basic operation and care of the unit. Please read carefully and keep
for future reference.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a damp cloth only. Strong cleaning agents, such as thinner or similar materials can
damage the surface of the unit.
iBT33
Table of Contents
3
Included ............................................................................................................................ 4
Meet Your iBT33................................................................................................................. 5
Charging the Unit................................................................................................................ 6
Pairing Your Device.............................................................................................................. 7
Pairing with a Different Device ............................................................................................... 8
Playing Audio Via Bluetooth................................................................................................... 8
Speakerphone Operation...................................................................................................... 9
Playing Audio Via Aux In .................................................................................................... 10
Internal Rechargeable Lithium-ion Battery................................................................................ 11
Consumer Product Safety Guide.......................................................................................12-13
FCC Information................................................................................................................ 14
Troubleshooting................................................................................................................. 15
Warranty......................................................................................................................... 16
iBT33
4
Included
• iBT33 unit
• USB charging cable
• Audio cable
iBT33 USB charging cable audio cable
Meet Your iBT33
iBT33
5
Back
Top Panel
Front
Volume – /Volume + Buttons
Battery Level Meter
Microphone
(behind grille)
Power Button
REV/FWD
End/Answer Call Buttons
Play/Pause/Pairing Button
Bluetooth Status
Indicator Light
Aux-in Jack Reset port
Waterproof cover
Micro USB Charging/
Audio-in Port
Charging the Unit
CHARGE UNIT BEFORE USE
1.Connect the micro USB plug to the micro USB charging port on the back of the unit.
2.Connect the standard USB plug end of the cable to a power USB port on a computer or other USB
charging device. For first time use, charge unit for about 8 hours.
3.The Battery Level Meter on the front of the unit flashes while the unit is charging and turns solid
once the unit is fully charged. See table above for charge status information.
6
Using the iBT33
NOTE: The white, 4 segment Battery Level Meter on the front of the unit is activated when the unit
is ON or when connected to a charging source via the USB cable.
iHome iBT33 USB port
Charge via computer USB port, USB AC adaptor or other powered USB port
Computer connected
to working outlet Computer USB port
USB AC adaptor (not included)
Battery Charge Status
100% charged
dead, needs charge
low, needs charge
60 - 99% charged
46 - 60% charged
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT33. Once your device is
paired, the iBT33 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and
make it “discoverable” by turning on Bluetooth mode (check in Options or Settings).
2. Press the Power Button to turn on the iBT33. The first time the unit is powered
on, it will enter auto-pairing mode and attempt to connect to a Bluetooth device (if
so, skip to step 4). Otherwise, follow step 3 to begin pairing.
3. Press and hold the Play/Pause/Pairing Button for 2 seconds. The iBT33 will
beep and the Bluetooth status indicator light on front of the unit will flash quickly.
4. “iHome iBT33” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or
similar message appears, select “iHome iBT33” to connect it. If prompted for a passcode, enter
“1234” on your device’s keypad.
Using the iBT33
7
5. If pairing is successful, 1 beep will sound and the Bluetooth status indicator light will appear solid blue,
indicating the iBT33 is ready to play music. There should also be an indication on your device. If no
device is successfully paired within 3 minutes the iBT33 will default to previous mode. Once the iBT33 is
paired to a device, it will attempt to autolink when the device is within range (about 30 feet).
Pairing Your Device
For iPhone
iHome iBT33 iHome iBT33 iHome iBT33 iHome iBT33
For other
Pairing with a Different Device
When you power ON the unit, it will automatically link with the previously paired Bluetooth device as long
as that device is still within range (approx. 30 feet). To pair with a different device follow steps 1 - 4 under
”Pairing Your Device” on previous page.
Playing Audio Via Bluetooth
1. Press the Power Button to turn on the unit. The status indicator will glow solid blue when a linked
device is in range and detected. You can then listen to audio streamed wirelessly from your paired
Bluetooth device.
2. Press the Play/Pause/Pairing Button to play audio from your device. Press again to pause play
and once more to resume play. When Bluetooth audio is active, the status indicator will glow solid
blue.
3. Press the << REV or >> FWD Buttons to go to the beginning or end of the current track. Press again to
go to the previous or next track. You can also use menu and track controls on your Bluetooth device to
navigate tracks.
4. Press t
he – or +Button to adjust
the iBT33 volume. You can also adjust volume on your device.
5. When done listening,
press the Power Button
to turn the unit OFF.
Using the iBT33
8
NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone. Press
thexxxxxxFWD/Answer Call Button to answer the call, or press the REV/End Call Button
to ignore it. For call waiting function, use phone controls on your device.
2. When a call is completed, press the REV/End Call Button to end the call and resume
previous function.
Using the iBT33
9
Speakerphone Operation
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali iHome Altoparlanti
iHome
iHome iBT12 Manuale utente
iHome
iHome iDM11 Manuale utente
iHome
iHome iH19 Manuale utente
iHome
iHome iDM14 Manuale utente
iHome
iHome iHRK-500LTMS Manuale utente
iHome
iHome iBT10 Manuale utente
iHome
iHome IDM12 Manuale di istruzioni
iHome
iHome iDM15 Manuale utente
iHome
iHome iBT66 Manuale utente
iHome
iHome iX360 Manuale utente
iHome
iHome iBT74 Manuale utente
iHome
iHome iBT15 Manuale utente
iHome
iHome iBT37 Manuale utente
iHome
iHome iBT175 Manuale utente
iHome
iHome PLAYGLOW MINI iBT810 Manuale utente
iHome
iHome Baby iZ44 Manuale utente
iHome
iHome iBN27 Manuale utente
iHome
iHome iHPA-1500LT Manuale utente
iHome
iHome ibt88 Manuale utente
iHome
iHome iAVS16 Manuale utente
