IHP H5861 Manuale utente

Questo manuale è adatto per i seguenti modelli

3

Manuali Accessori per caminetti popolari di altre marche

Valor

Valor L2 1700K Manuale utente

Exodraft

Exodraft Xzense Manuale utente

Whalen

Whalen Ruso MNFP62BF23-6 Manuale utente

Lopi

Lopi Hearthview 864 Manuale utente

Woodstock Soapstone

Woodstock Soapstone Fireview 201 Manuale utente

EdilKamin

EdilKamin SERBATOIO 250 Guida rapida

Bronpi

Bronpi KIT-1 Manuale utente

Town & Country Fireplaces

Town & Country Fireplaces 22150051 Manuale utente

Travis Industries

Travis Industries 33 DVI Manuale utente

Superior

Superior ASD3628-TI Manuale utente

pleasant hearth

pleasant hearth OFP28WG Manuale utente

Firegear

Firegear FG-H-2110SS Manuale utente

Nibe

Nibe Contura C i31 Manuale utente

kozy heat

kozy heat KZK-052 Manuale utente

SimpliFire

SimpliFire SF-WM36 Manuale utente

Bluegrass Living

Bluegrass Living BC18NR Guida rapida

pleasant hearth

pleasant hearth IRIS SCROLL Manuale utente

Cooke

Cooke Glass Wind Guard Manuale utente

LOG SET

MODEL VINTAGE™

INSTALLATION INSTRUCTIONS FOR INSTALLING A LOG SET.

FOR USE WITH VINTAGE™ GAS STOVES

775271M

Rev. A, 11/2013

HEARTH PRODUCTS

KITS AND ACCESSORIES

KIT CONTENTS

1 ea. Rear Log

1 ea. Left Front Log

1 ea. Right Front Log

1 ea. Straight Twig

1 ea. Instruction sheet

TOOLS NEEDED

None

GENERAL INFORMATION

If you encounter any problems, need clariﬁcation of these instructions

or are not qualiﬁed to properly install this kit, contact you local distribu-

tor or dealer.

Read this instruction sheet in its entirety before beginning the installation.

ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND

OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO

THESE INSTRUCTIONS.

TURN OFF THE APPLIANCE AND ALLOW IT TO COMPLETELY COOL

BEFORE PROCEEDING.

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.

Vintage™ Log Set

Cat. No. Description

H5861 Log Set

Misc. Firebox Accessories (sold separately)

H5863 Bag of Volcanic Stone

H5864 Bag Of Glowing Embers (rockwool)

H5865 Bag of Steel Wool

INSTALLATION INSTRUCTIONS

If logs are not installed according to the log installation instruc-

tions, ﬂame impingement and improper combustion could

occur and result in soot and/or excessive production of carbon

monoxide (CO), a colorless, odorless, toxic gas.

The size and position of the log set is critical to achieve a safe,

reliable and attractive ﬂame pattern. Any attempt to use a

different log set in the ﬁreplace will void the warranty and will

result in incomplete combustion, sooting and poor ﬂame quality.

Step 1. Open the glass door per the instructions in the installation and

operation manual provided with the appliance.

Step 2. Remove the logs from the box and carefully unwrap them. The

logs are fragile so handle them with care.

Step 3. Align the holes in the bottom of the rear log (the longest log in

the set) with the two pegs just to the rear of the rear burner tube

and slide the log down onto the pegs (Figure 1). The charred

black surface of the log should face the front.

Figure 1

fire-parts.com

2

Printed in U.S.A. © 2007 IHP LLC

P/N 775271M REV. A 11/2013 1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.

IHP reserves the right to make changes at any time, without notice, in design, materials,

speciﬁcations, and prices, and also to discontinue colors, styles, and products. Consult your

local distributor for ﬁreplace code information.

Step 4. The left front log has two pegs protruding from the top surface

(Figure 2). The charred black with white highlights surface of

the log should be facing forward. Slide this log down onto the

left front and center front pegs.

Step 5. The right front log (positioned with the black charred surface

towards the front) should be placed on the peg protruding from

the right end of the left front log and the remaining peg at the

right end of the metal log support panel (Figure 2).

Step 6. The remaining straight twig has two holes in the bottom. Position

the twig so the black and white charring is to the front and slide

the holes over the peg in the left front log and the peg in the rear

log (Figure 3). It may be necessary to roll the top of the rear log

slightly forward to put this twig on the pegs.

Figure 2

Step 7. Figure 4 shows the entire log set assembled. The volcanic stone

provided with the appliance (or sold separately) may be placed

one high in front of the front burner tube using care not to cover

all the burner ports. Any extra volcanic stone may be placed at

the ends of the front log, off the burner. Place small pinches of

glowing embers (rockwool) on top of the volcanic stone.

Figure 3

Pilot Viewing

Volcanic

Stone

Figure 4

Note the location of the hole for viewing the

pilot light. When the pilot is burning, a

blue ﬂame can be seen through

this hole.

fire-parts.com