Ikan GRH Manuale utente
CHECKED BY
GRH
Quick Start Guide
Gimbal Ring Handle
What’s Included
2 x Ring Halves
2 x Stand Legs
2 x Side Handles
1 x Top Handle
1 x Top Handle
1 x Quick Release Adapter Plate
1 x Hex Key
Installation Instructions
1. Before you start, please make sure you find a leveled flat surface to work on. Using the hex key attach the two stand legs
onto one of the ring halves. After tightening the stand legs make sure both legs are flat.
2. Install the quick release adapter and plate between the two stand legs.
3. Next screw both side handles onto the ring half with the stand legs.
4. IMPORTANT: To install the top ring half simultaneously tighten both side handles at the same time. If one side gets stuck do
not use excessive force or continue tightening. Loosen the stuck side and make sure both side handles are being screws
on simultaneously at the same speed.
5. Tighten the top handle onto the top ring half. For a more comfortable hold it is suggested to tilt the handle slightly down
when installing.
If you need to take apart the Gimbal Ring Handle please remember to loosen both side handles at the same
time to avoid getting one side stuck.
1
1 Stand Legs
2 Quick Release Adapter Plate
3 Top Handle
4 Side Handles
5 Ring Halves
6 Hex Key
2
3
4
5
6
Specifications
Optional Accessories
Some other products that work well with the Gimbal Ring Handle available from Ikan include:
DS2
DS2-A
EC1
MS-PRO
Beholder 3-Axis Gimbal Stabilizer with Encoders for DSLR and Mirrorless Cameras
Beholder Angled 3-Axis Gimbal Stabilizer with Encoders for DSLR and Mirrorless Cameras
Beholder 3-Axis Gimbal Stabilizer with Encoders for DSLR and Mirrorless Cameras
Beholder 3-Axis Gimbals Stabilizer with Encoders for Mirrorless Cameras
Fixture Specifications
Compatible With Beholder Gimbals
Dimensions 21 x 21 x 7 in.
Thread Size 3/8"-16
Weight 3 lbs
Learn More
More dynamic information at official website: www.ikancorp.com
Support
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2017 ikan Corporation. All rights reserved
Indice
Altri manuali Ikan Accessori per fotocamere
Ikan
Ikan PT4500-TRIPOD Manuale utente
Ikan
Ikan Beholder MS-PRO Manuale utente
Ikan
Ikan Saga SX7 Manuale utente
Ikan
Ikan PT2500 Manuale utente
Ikan
Ikan IB 500 Manuale utente
Ikan
Ikan D5-K1-N Manuale utente
Ikan
Ikan Beholder MS-PRO Manuale utente
Ikan
Ikan PT4500-SDI-P2P-TK Manuale utente
Ikan
Ikan OFly Manuale utente
Ikan
Ikan CTL-USB01 Manuale utente
Ikan
Ikan PT4200-CVK Manuale utente
Ikan
Ikan PD1 Manuale utente
Ikan
Ikan Recoil XT Manuale utente
Ikan
Ikan JIB-01C Manuale utente
Ikan
Ikan OYB120 Manuale utente
Ikan
Ikan ELEMENTS X-CAGE Manuale utente
Ikan
Ikan SW50-3PT-KIT Manuale utente
Ikan
Ikan HB160-GC Manuale utente
Ikan
Ikan PT19-SDI-TM Manuale utente
Ikan
Ikan FLY-X3 Manuale utente
